Upgrade to version 6.0 SourceFire Module questions

We have just implemented SourceFire Module version 5.4.1 on our ASA recently, but want to upgrade to version 6.0. I've been through Notes version 6.0 for the upgrade, which are dated to November 2015, but had a few questions that I was hoping someone here could answer:

-Our FireSIGHT Management Center is a virtual appliance of 64-bit. Can we install version 6.0 on a virtual appliance VMWare running on EXSi 6.0? The only issue date list 5.1 and 5.5 ESXi ESXi.

-Should what files I use for the update? The Release Notes say to use "SourceFire_3d_Defense_Center_S3_upgrade - 6.0.0 - 1005.sh. My choice on Cisco's Support site are: asasfr-sys - 6.0.0 - 1005.pkg, asasfr-5500 x-boot - 6.0.0 - 1005.img and Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh. I guess the sys-asasfr - 1005.pkg - 6.0.0 is for CME, and the Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh is for the ASAs.Is that right?

-How long will the update for FMC and ASAs? The ASA is a 5516 x and the release notes look like they say that the update will take about 41 minutes.

ESXi 6.0 is not officially supported so that your experience may vary. If you get stuck, you may TAC by telling you that you're on your own.

"Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh" is used to upgrade the fire ASA power module in the Manager of firepower.

If you were a fabricated construction or reimage then you would use the boot images and sys respectively.

41 minutes for CME is right. As mentioned Philip, 2 hours is a better estimate of the ASA module, especially on a smaller area as the X 5516.

Tags: Cisco Security

Similar Questions

  • iTunes crashes after upgrade to version 12.4.3

    Hello

    whenever I start itunes after the upgrade to version 12.4.3 the following occurs:

    The application starts, it checks the mediathek itunes, the iTunes window opens for 1 or 2 seconds, and then the application crashes.

    What can I do?

    Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

    Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

    If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

    If it does not start, you will need to study along these lines:

    First of all, try to restart your computer.

    How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

    iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

    How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

    LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369 - remove corrupted preference files

    Reinstall iTunes:

    -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

    -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611

    If iTunes does not start

  • iPhone 6 more cannot sync after the upgrade to version 9.2

    Hello

    My iphone 6 more used to synchronize successfully with itunes. But when I've upgraded to version 9.2; my iphone fail to sync (latest itunes 12.3).

    I tried many ways, as said in the previous discussion (such as reinstalling itunes, restore iphone... ect) but it's still sturborn.

    Can someone help me out of the question?

    You will need to provide us with details of what prevented you from synchronization. Without information about what happened when you tried and what prevented you to do, there is little, we can offer you.

    See you soon,.

    GB

  • This connection is untrusted with error code error code: mozilla_pkix_error_v1_cert_used_as_ca) after the upgrade to Version 38 for my Web site.

    My site works fine with Firefox 35 version without any problems. but when I upgraded to version 38 I started getting the error code: mozilla_pkix_error_v1_cert_used_as_ca). I checked my certificate and is valid until the end of the year

    There are hundreds of variations within each major version of Firefox, so the cause of the problem might be hard to guess without more information.

    You want to post the URL of your site?

    If not, you could generate a report using this test page: https://www.ssllabs.com/ssltest/. Which often will identify the problem that Firefox has with the certificate.

  • Upgrade to version 35, cannot access my profile on another disk

    Hi people. I tried to understand this for 3 weeks without success. I hope that there is someone out there who can help you.

    My Firefox is on D:, but I have my profile on E: (I like it like that for reasons which are not important). Everything worked fine until I upgraded to version 35 (of 32). When the upgrade, version 35 sets the folder from my profile on the D: drive, but I need for Firefox point to drive E: where in fact. I read on how to move the profile folder, but can't make it work for me, for some reason any. Does anyone have a simple solution? Thank you.

    See also:

  • FF does not start after upgrading to version 27.0.1

    FF does not start after upgrading to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

  • Upgrade to version 20 broke all bookmarks and URL address bar

    Since I updated Firefox to v19 to v20, the program is not responding when I click on any bookmark or manually enter a web address in the URL address bar.

    It does not expire waiting for a connection, and there is no "connecting to" message in the status bar. Nothing happens at all.

    I can run Chrome and IE 10 on the same computer you connect to the internet without problem. Only 20 of Firefox has this problem.

    Article knowledge base, I tried to delete the application rule for Firefox to my firewall software (Avast Internet Security) and add the rule. This does nothing.

    The program is essentially dead. I'll try to go back to version 19 to see if this solves the problem. In the meantime, the 20 version is broken on my PC.

    Firefox version: 20
    The Version of Windows: Windows 7 Home Premium SP1 32-bit
    AV and firewall software: Avast Internet Security 7.0.1474

    Does anyone else have this problem? Have you found a solution, other than the return to the old version of the program?

    UPDATE: for the record, back to FireFox 19.0.2 solved the problem. The program now meets all the favourites and manually entered web addresses in the URL bar.

    I disabled the maintenance service that updates 'in silence' of Firefox. The plan is now simply ignore all the Mozilla prompts asking me to upgrade to version 20.

    Problem solved, for now.

  • A Web site cannot be displayed more after the upgrade to version 14.01

    I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
    This page cannot be displayed.

    What is a Web site or Firefox (or other causes) error?

    You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.

  • I got a message to say I should upgrade to version 11, but when I try I thought my version is so far tp - i.e. version 10.0.2 running on Mac

    I am running Firefox on Mac OS 10.6.8 10.0.2. Get the message that I had to upgrade to version 11.0, but when I try Firefox says that my current version is up-to-date

    Sometimes the updater becomes confused, in this case, your best option is to go to www.getfirefox.comand download and install Firefox 11 from there. You can do it just on your current installation and not your personal data will be affected.

  • Tab "Welcome" of Firefox loads every time, because the upgrade to Version 10. How to stop this load?

    Since I've upgraded to Version 10, the 'Welcome' Firefox tab load when I open Firefox and my homepage.

    The file titled "prefs" is more than likely prefs.js
    The extensions of files that might be hidden in Windows Explorer

    The prefs.js (or just prefs) is perhaps the only file you have.
    The other ones listed on the page linked above (prefs.js.moztmp, Pref.-n.js, Invalidprefs.js) may not exist at all. so don't worry to their topic, if you do not see them.

  • Firefox crashes after upgrade to version 8.0.0

    Under XP. had no previous with Firefox problem until I upgraded to version 8.0 today. Now, Firefox crashes immediately to start the browser and open the crash reporter. Also crashes in safe mode.

    Your crashreport:

    https://crash-stats.Mozilla.com/report/index/BP-29aec938-779e-45CD-83f6-238ca2111109

    8.0 Firefox crash [@ DbgBreakPoint]

    This seems to be a Roboform. Install the latest version of Roboform 7.6.2 should solve this problem according to the related Bug 691271.

  • Firefox crashes at the start even in safe mode after upgrade to version 7.0.1

    Firefox crashes on startup after upgrade to version 7.0.1

    It hangs at the start even in safe mode.

    I tried a complete uninstall and reinstall, but choose to keep all my settings (e.g. bookmarks) etc that I don't want to lose my favorites.

    Your crashreport is

    https://crash-stats.Mozilla.com/report/index/BP-24b848e4-7d2a-4cf1-B0B0-31ccd2111021

    Report of Crash Firefox 7.0.1 [@ mozcomp.dll@0xab51]

    Crash start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO

    See Bug 680927 for more information

    The problem likely is the use of some software Oracle etc., the Oracle Developer being aware of the problem and working on a fix. Meanwhile, there is a hack for registration as a potential solution, or the simpler solution of temporary demotion to firefox 3.6.23.

  • How to upgrade to Version 10.8.5 my MacBook Pro software version 10.7.5

    How to upgrade to Version 10.8.5 my MacBook Pro software version 10.7.5

    The latest version of Mac OS is 10.11 'El Capitan' and the upgrade only currently available free. Any computer capable of running 10.8.5 will run 10.11. My son and I both have the same model of MacBook Pro you and executed both El Capitan without problem. I upgraded my RAM 8 GB but its still has the original 4 GB and shows again no problem.

    Any successful upgrade means that you must be free of any antivirus, internet security or so-called applications of "cleaning/optimization/tune-up. They will destroy the performance.

    If you MUST have 10.8 you must buy it on the Apple store online (not the Mac App Store application on your computer). The purchase to the store link is here:

    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion?FNODE=4ddb646a128d 220f3660a15e8b76a65478d23f0b7384d31a4b35...

    If you are not in the United States, please search in the Apple store online for your County using the "mountain lion".

  • Whyvdo that some sites tell me to upgrade to version 4 when I already shows that I have 4.01

    Some sites tell me to upgrade to version 4, but I already have. The two sites I can think of right now are Yahoo and Chrome Angrybirds.

    With the permission of the-edmeister

    Your string UserAgent in Firefox is probably messed up by another program you have installed. http://en.Wikipedia.org/wiki/USER_AGENT

    Enter about: config in the URL bar and press on enter if you see the warning, you can confirm that you want to access this page. Filter = general.useragent. The preferences that are bold, one line at a time, right-click and select Reset. Then restart Firefox

  • Upgrade to version 4 but the features are not not like version 4

    A few days back I have upgraded to version 4 of Firefox. But the page is not quite the same as showed/displayed by the Mozilla site.

    There is at the top left tab "Firefox" with menu drop-down.

    On the other hand, all my previous toolbars and tabs are present.
    It should be noted that I have not uninstalled and reinstalled the
    program - me. Also I will have no problem to use worm. 4
    in the opposite case.

    I'd be happy if someone, please, explain the phenomenon.

    I forgot to mention that the Firefox icon will be shown by default in Vista and Windows 7 PCs. users XP will be out manually.

Maybe you are looking for

  • Unable to Post

    Why do I get a message telling me: "You are not allowed to create or update this content" when I try to post to Apple Support communities?

  • OfficeJet 6700 flashes under the scanner cover

    The light continues to blink when the lid is down on the scanner. Is this normal? The sales representative at the store said it should not. It seemed that it was not in the store, so I exchanged for a new one, but when I traded my printer, it did the

  • cannot back up Windows Vista

    I get the following MSG: Teh diskett evil lies in the drivve.  Insert %2 (flight series # 3%) in drive %1.  Error (0 X 80070022) the disc that I use is a Cd - R (and in fact, every time I use it I tells me that it is not formatted)

  • Can someone please guide me what combinations encryption algorithm is compatible for MS SQL Windows Server 2012 2012. ??

    Original title: Details of the cipher suites? Can someone please guide me what combinations encryption algorithm is compatible for MS SQL Windows Server 2012 2012. ?? Thank you

  • Put an AbsoluteFieldManager under the banner of screens

    I'm trying to use setBanner() to fix my AbsoluteFieldManager header to the top of the applications without making it disappear when I scroll down. The problem I have is that the header displays fine, but when I try to add anything to the screen it ne