upgrade to windows 10 and unable to connect to the Netgear router

After the upgrade to Windows 10, I get a connection limited to the router.  I have tried everything that seems to indicate that I have seen but not solution.  I went back to 8.1 and everything is ok.  Drivers are all to date I can say.  The problem seems to be related to the default gateway or the lack of it.  It is not good to reset the router.  My labtop HP running windows 8.1 works fine but my Dell Inspiron gets only limited access to the router. I need help to solve the end.

keybaud

I do not have a Dell, but I'm having a similar problem with the Netgear WNDR4500 v1 router and an ethernet Intel I217-V adapter. 10 Windows does not recognize the router is via the Ethernet connection, but it does not work with a wifi dongle.

This is to help, adding that I don't expect Dell to solve my problem. :-)

Hello

Not sure what help I can give since I know not what system you have, and if it is considered compatible Win10, but here is the link to the driver Windows 10 ethernet Intel 1217 - V cards.  ((NOTE: le lien que je fournis est pour la version 64 bits de Windows 10.))  If you have installed the 32-bit version and then to just change the drop-down list of BONE near the top of this page))

I would also say that updating the firmware on this router would be your next step.  See if one or both of the Exchange help people.

If this isn't the case, then remove all your system's ethernet drivers, reboot and see if Windows 10 has all the innate drivers that may work.  Or else let Windows Update search and download a driver.  Who has the strongest chance of finding a compatible driver.

I hope this helps.

Todd

Tags: Dell Products

Similar Questions

  • With the help of Windows Vista Edition family and unable to connect to the Netgear router.

    No matter what patches I try, I still, I get a message error "settings saved on this computer for the network do not match the requirements of the network. Two other latops under Xp and Windows 7 connect perfectly.  The user called Geeksquad who told him it was the router. Replaced the router and the same issue. This default laptopp local only access point. Fix regedit for broadcast and Fixit file downloaded here have not solved the problem. Have you tried to push the direct connection button on the router, change the network connections settings... everything. Nothing works. Help, please! The user of this laptop is uber frustrated. I don't know what else to do.

    Geek Squad - use if you do not want necessarily fixed it - but you like overspending for no reason.

    Sounds like a bad driver/software.

    What is the wireless network device in the system in question (I hope that something like Intel...?)

    Is the latest software and drivers from the manufacturer of the device (don't not relying on Microsoft)?

    May need to remove all network components, reset it and install the latest drivers - and if you think Geek Squad would do that...  They could - if you get a child who loves really networking of their own things at home - but the odds are against it.

  • Unable to connect to the netgear router, it says failed to connect check connection

    Original title: netgear router

    Im trying to connect to my netgear router a TI repeat check connection failed to connect, but I can go on the internet. He began to do after I changed the channel on the router one moment I can reconnect you to fix. or go to the web page on the internet to solve if someone could help me that would be great.

    Hello

    1. What is the model No. the Netgear router?
    2 have you tried to login using the different browser and check?

    Check out the following link and check if you can access the router page.


    If you are unable to log on to your router

    http://KB.NETGEAR.com/app/answers/detail/A_ID/1097/~/if-you-cannot-log-on-to-your-router

    Alternatively, you can contact Netgear support for more details:

    http://forum1.NETGEAR.com/

    If you have any other questions, answer here and we will be happy to help you.

  • WIFI disabled on windows vista and cannot wireless connect to the net

    WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

    All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

    In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

    Is there a way to FIX?

    http://support.Microsoft.com/kb/932520

    Read the above re ignore this error message.

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

    Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

    Hi Dan,.

    Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

    Also, what exact version of Photoshop and Lightroom are you using?

    Search for graphics card drivers update as well.

    Kind regards

    Assani

  • I have upgraded to Windows 10 and forgot to turn off the previous applications.

    I have upgraded to Windows 10 and forgot to turn off the previous applications. How can I disable all applications that are enabled in the creative cloud first?

    Hi,

    Please see enable and disable Adobe products

    Hope that helps!

    Kind regards

    Sheena

  • I would like to print from laptop to the printer at home. Printer is connected to the NetGear router ethernet

    HP PAvilion dv1000, Windows XP

    I would like to print from laptop to the printer at home.  The printer is connected to the NetGear router ethernet.

    I was able to print wireless from laptop to HP Officejet 7310 all-in-one, but now all I get is document to print message' failure '. "  I can get documents to print on the printer using my smart phone, but not the laptop.

    I used the "find printer" button on the print screen and can see the printer to select.

    Any suggestions?

    Figured it out after watching a few other posts...

    Configured the printer port IP address and now it is printing perfectly.

    Thank you to have messages out there for review.

  • Satellite Pro A10 - WXP re-installed and unable to connect to the internet

    Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
    I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
    1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
    They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

    My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

    Would appreciate any help...
    Thank you

    Hello

    Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

    Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

    > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

    Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

  • Satellite A110-195 unable to connect to the WLan router

    Hello

    I have a wifi router and I have connected my laptop and it worked wery well but on low there is I could not conect to router but woudn't ip address pop up. Internet access was not.
    I am connected to the same router another device and it worked...

    Hello

    Believe me, there is no general solution, you must check all the settings of your operating system

    First of all that I recommend to check the parameters of the TCP/IP protocol if everything is settled automatically on.
    Then check if you are using encryption parameters right as standard (WEP, WPA, WPA2) encryption and the encryption key.

    It s also advised to reinstall or update the Wlan card driver

    If you used the windows own WLan configuration, I would recommend testing as Atheros Client utility or Intel ProSet Wlan client configuration utility. But it depends on the WLan card what client WLan configuration utility can be used

    concerning

  • Unable to connect with the modem router e2500

    I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

    Any ideas why the connection to the modem router is blocked?

    Thnaks,

    Al

    al_mathews wrote:

    My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

    One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

    You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

    If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

  • Unable to connect to the wireless router

    I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

    Moved from Explorwer Internet

    Original title: wireless network device network Ethernet network router

    Hi Trisha,

    Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

    Please answer these questions:

    1. What is the brand and model of the router?
    2. If it works much earlier?
    3. Any changes made to the computer before the show?
    4. What is the exact error message received when you try to connect to the router?

    I suggest you try the steps from the following link:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:

    Set up a wireless router

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

    Setting up a wireless router
    http://resource.Dlink.com/connect/setting-up-wireless-router/

    Post back with the State of the question.

  • Satellite A105 - unable to connect to the wireless router more

    I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

    To do or check to login once more?
    Thank you

    HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
    If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

    If anything brought success then just to give a few comments. :)

    Welcome them

  • HP Pavilion a1118x/PX757AA-ABA: I have upgraded to Win 7 64 but lost the driver for the Ethernet connection and unable to connect to the internet

    I can't connect to the Internet, because none of the network drivers are showing. I'll use this for Microsoft Flight Simulator so what card Ethernet buy to install or usb wireless driver do I need to buy to install. The current Ethernet is built-in to the motherboard. The number on the Ethernet Jack real housing is p53-153-11z9, and it's a salmon motherboard.

    Hello:

    I compressed upwards and tied the ethernet driver that shows support for the hardware ID you have validated, below.

    You will need to manually install the driver as follows...

    Download and uncompress the file that I attached to his record.  Do nothing with the files in the folder.

    Go to Device Manager and click on the ethernet controller requiring driver.

    Click on the driver tab, click on set to update driver.

    Select her browse my computer for driver software option and navigate to the folder you unzipped.

    Make sure that the include subfolders is selected, and I hope that the driver will be installed.

    Then restart the PC and see if you have network connectivity.

  • I have a Toshiba Satellite M50, are they able to be upgraded with windows 7, and I can't do the wireless network is displayed?

    I can not connect or see the symbols wireless, and if I connect the ether net cable is fine, but I wanted to use wireless? the switch is on the front is on and area 2 connection contiues to say that there is a cable unplugged? Help, please

    Please can someone post a link on how to configue this laptop wireless... Thanks OH it OF RUNNING WINDOWS XP ATM...

    I can not connect or see the symbols wireless, and if I connect the ether net cable is fine, but I wanted to use wireless? the switch is on the front is on and area 2 connection contiues to say that there is a cable unplugged? Help, please

    Please can someone post a link on how to configue this laptop wireless... Thanks OH it OF RUNNING WINDOWS XP ATM...

    Your old Toshiba Satellite M50 probably cannot be upgraded to Windows 7, but go here: http://support.toshiba-tie.co.jp/windows7/upgrade_cae.htm

    What is Windows XP "ATM"?  Right-click on desktop and select Properties.  What version of WIndows XP, including the service pack is shown here?

    What do you mean by 'symbol wireless "?

    Either the light near the wireless switch on the front of the laptop on or off? It will power on and off when you change the switch setting?

    Open network connections (start > run > ncpa.cpl > OK) and list all the icons that you see there.

  • RESOLVED - unable to enable IPv6 in Windows 7, so unable to connect to the homegroup - ZoneAlarm was the problem

    My problem is that I can't turn on IPv6 in Windows 7.

    My goal was to set up a homegroup three computers so that I can share a printer that is connected to one of them. They are all running different versions of Windows 7.  A desktop computer has created a homegroup, and a second desktop computer connected successfully to the homegroup and can print using the first computer printer.

    The third computer is a portable computer. When you go to the homegroup settings page, it says that the homegroup is available. But this computer is unable to join when you click on the "join" button. The convenience store said IPv6 must be enabled.

    Option is checked in the IPv6 network card settings. (The install button is also active and uninstall is dimmed. I don't understand why this should be as I have read that you cannot uninstall IPv6, if it makes sense for the uninstallation to be grey, why install would be an option? Confusion between.)

    Here is what seems to be the root of the problem. In the registry settings, in the section IPv6 DisabledComponents is set to 255 (disabled). I change it to 0 (all features enabled), but I can't always connect to the homegroup. I restart the computer and the value 0 is changed back to 255.

    I can't activate IPv6, it isn't surprising that the computer cannot join the homegroup as I read that this function requires IPv6.

    Can any expert from Microsoft give me some advice on how to operate the homegroup?

    Thank you very much.

    I have now found the answer to my problem. This is a setting in the free ZoneAlarm firewall. I will describe the solution in the case of meeting other people that.

    I have the default setting of the version of ZoneAlarm is that it disables IPv6 when it starts. (I don't know if it's the same for all versions).

    Although I tried disabling ZoneAlarm (and my separate anti-virus) so he was trying to set up group residential, just turn it off has no impact on registry settings - DisabledComponents is always set at 255 until you change to 0 and, critically, restart the machine. Then, the parameter 0 (enabled) will come into force. Or so it seems to me as a layman.

    But if you did not disable the automatic startup of ZoneAlarm (like me) then as soon as you restart the computer, ZoneAlarm starts too and resets the 255, new registry entry to disable IPv6. If you can't join a homegroup.

    The solution is to open ZoneAlarm and choose firewall, hand and advanced. Then you will see the option to activate IPv6 networks. When I didn't do the notebook had no problem joined the homegroup.

    I don't know why I have the same problem on the second desktop computer. Maybe it's runnning a later version of ZoneAlarm to allow IPv6 - I haven't checked.

    In any case, I spent hours looking for this solution, so I hope that the description above helps someone else that has a parameter of the problem until a homegroup because of what seems ZoneAlarm made IPv6 settings in the registry.

Maybe you are looking for