upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

Similar Questions

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Installation of Windows 7 very smooth with the new installer

  Last night, I installed Windows 7 on my NB205. I used the "Toshiba for Windows 7 Installer", which is available for download from their support site. This utility download the drivers needed and patches and automatically installs. The installation was very good. I used my NB205 all morning and everything seems fine. Even the function keys are integrated with the Flash card utility.

  I have partitioned my drive and set up a dual boot so I can still use Windows XP with an old USB TV tuner, I have, when needed. (This happened very convenient when I had a power failure during an ice storm a few years ago. Unfortunately, my laptop battery only lasted for 2 hours at a time. With the NB205 I'll be able to handle a much longer blackout).

  And then you run this file to get the downloads?

• Windows 7 has not installed windows with the new installation games

  Hi all

  I just installed a fresh copy of Windows 7 Pro, but I noticed that no games have been installed with it (Solitare, Minesweeper, etc.). What is happening with this? Are no games included with the Pro version or have not installed? How can I get back them?

  Thank you!

  Hello.

  By default the Professional SKU does not install any games.

  You can install them yourself by clicking on start-> Control Panel-> programs-> Windows features turn on or off. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Qosmio F10 - cannot install Windows XP Home edition with the new HARD drive

  My F10 won't boot from a hard drive and because of its obvious from the hard drive, it is definitely broken. I changed the build in Toshiba 80 GB HDD for a Toshiba hard drive with 60 GB.

  I put an Installation of Windows XP disc in the drive and press C at the start to boot from the CD. It does not start the installation, but on the contrary, he says that I have to remove the hard drive.

  Why? Is this only possible ti disc editing hard identical because there is not bios?

  HELP PLZ!

  Hello

  Your new HARD drive is recognized correctly in the BIOS?
  Check it!

  Plus when you get exactly the message installing Windows and which will be displayed exactly?

  Can try you with Toshiba Recovery disk, please?

• I'm unable to register to Win XP Media center edition with the new product key

  I have 4 computers that are running Microsoft XP. The motherboard one running XP professional D846Q-6TBH4-F72DX-FD3HR-D4X96 is dead so I bought a new computer. This computer that I use as my main computer uses Windows XP Media Center Edition. When I built it a mother of mother Intel many years ago, I bought 2 copies of the operating system where a computer is dead. The one I use now is xxxxx-xxxxx-xxxxx-xxxxx-KQ39J. When I tried to save my other disks xxxxx-xxxxx-xxxxx-xxxxx-J6P9G for my new computer, I learned that I could no longer buy a computer with Windows XP. I bought this year and would like to register now. I replaces legally purchased by another Windows XP operating systems. How do I do that?

  First remove your product keys of this post as everyone can see them. Then try the activation of the phone.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Can not see the pictures (.bmp, .jpg) with the new installation of windows 8 pro

  Just installed Windows 8 Pro 64 bit on HP laptop. At the graphics card AMD Radeon 7660. Cannot display pictures or even photos.

  http://www.thewindowsclub.com/take-ownership-Windows-8 can help. use at your own
  risk.
   
   
  ..
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Help please with the new installation of windows 7 with internet

  We have two laptops, both using Windows 7 and a hub BT wireless, everything works fine, until I decided to reinstall windows. Now, with this computer, I just haven't been able to connect to the internet, even if the other laptop works very well. I'm no computer whizz and so enjoy really simple instructions on how I can connect to our BT Hub (internet).

  You will need to install your wireless adapter and Ethernet driver.

  Visit the Web site of the manufacturer for your laptop.

  Is which laptop brand and model?

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Can not start the server of the University Complutense of MADRID after the new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit EA

  Hi all

  After the new installation of the WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit UCM_server1 EE cannot start. (Please see trace below). WCC 11.1.1.7 work fine in this environment.

  Steps to follow:

  1. installation of jrockit - jdk1.6.0_45 - R28.2.7 - 4.1.0

  2. installation of WLS 10.3.6

  3. installation of the WCC 11.1.1.8

  4 creating the UCR 11.1.1.8 schema

  5. creation of field of config.cmd with AdminServer, UCM_server1, IBR_server1

  6. run Admin - (success)

  7 run (optional) NodeManager - (success)

  8 run UCM_server1 - failed

  Still not work after having patched MLR 1 for WCC 11.1.1.8 or upgrade 11.1.1.7.

  Log files we can see this problem caused by the JniNativeOsUtils.dll file in ' < Middleware Home > \Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1.

  I have replaced JniNativeOsUtils.dll with the same 11.1.1.7 file version and UCM_server1 started working

  I got errors when starting (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can raise in trace below), but COE upward and the works.

  I also get error when you try to start the utility SystemProperties or ComponentWithard:

  Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe." Load Assembly Microsoft.VC80.MFC, processorArchitecture = "amd64", publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

  Any ideas?

  Thank you

  Leon

  -------------------------------------------------------------------------------------------------------------------------

  ERROR:

  javax.servlet.ServletException: could not start a deployment of servers of IDC.

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.io.IOException: csServletFailedToFullyInitialize

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: intradoc.common.ServiceException:

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: intradoc.data.DataException:! Abandoned facility.

  at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)

  at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

  at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: intradoc.common.ServiceException:! csInitSecurityError

  at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)

  at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

  at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

  at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

  at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

  at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

  at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

  at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: intradoc.common.ServiceException:! syFileUtilsUnableToCreateSpecifiedDir, C:/Oracle/MEDIUM ~ 1/USER_P ~ 1/areas/WCC_DO ~ 1-AAU/cs/config/private

  at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)

  at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

  at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

  at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

  at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)

  at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

  at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

  at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)

  at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

  at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

  at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.AssertionError:! syNativeOsUtilsNotLoaded

  at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)

  to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

  to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

  at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

  at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

  at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

  at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

  at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

  at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

  at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

  at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

  at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

  at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

  at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion () Ljava/lang/String;

  at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)

  to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

  to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

  at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

  at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

  at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

  at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

  at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

  at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

  at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

  at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

  at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

  at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

  at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

  at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Hi all

  Cause of problems is the lack of 'Visual C++ 2005 SP1 Redistributable Package'

  Environment works great after installing the two versions (x 86 and x 64)

  Thank you

  Leon

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.