Upgrade to Windows Vista, but the graphics card does not support Aero.

Similar Questions

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Message from Microsoft Windows Error Reporting that says: upgrade your display adapter graphics card does not support DirectX 9.0 or newer

  I have a message that says Microsoft Windows Error Reporting: upgrade your display adapter graphics card does not support DirectX 9.0 or newer.  My screen blanks outs initermittently and icons on the desktop are very grainy? all patches, easy?

  Hello

  
  Perform the steps in the article and see if the problem persists
  http://support.Microsoft.com/kb/283658
  
  Hope that helps.

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Graphics card does not support the Aero themes

  I have a graphics card on CPU and its brand

  A10 - 7850K of AMD Radeon R7, 12 hearts of calculation 4 C + 8 G, 3700 Mhz, 2 Lossnay

  And this computer was built by me and I installed Windows 7 Home Premium 64 - Bit

  When I updated Windows Experience Index graphics Aero said 1.0 so I need the driver for this problem.

  It going no higher than 1.0

  Pls tell me if I can do something to solve this problem it is the old boring basic theme.

  Hi Lyle,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem your graphics card does not support the Aero themes. If you experience a problem then you need to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Try to update the drivers from the link provided below and see if it helps you to solve the problem.

  AMD DRIVERS

  You can also consult the article mentioned below to troubleshoot the Aero themes.

  Solve problems with Windows Aero

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• graphics card does not support pixel shader 2.0

  Original title: Pixel shader 2.0

  I tried to play League of legends download but when I started it upward, he said "graphics card does not support pixel shader 2.0" what can I do to fix this?

  Louis,

  Please go through http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/getting-an-error-direct3d-while-opening-league-of/a0cb03fd-f24f-44c8-98b6-545f0f0baf9e?msgId=91b97885-ed59-48bc-8120-ce24047ce8ef
  for a possible solution.

• Have more themes - "graphics card does not support themes.

  original title: what happened to my themes?

  On my screen saver, I had the possibility of themes under settings, now he's gone with a message that my graphics card does not support themes, how do that back? What I have to do a restore?

  Automatically search for updates of video card on the site of the factory.

• The current theme does not support Aero.

  Original title: Aero problems and taskbar changing colors.

  When I got to my laptop, I could use Aero and my Taskbar change color whenever I tried to change. I got a virus in sort of a thing that I downloaded online, and now I can't get my laptop Aero and I can't change my taskbars colors more.

  I troubleshooted it a few times, and this is what happens.

  The current theme does not support Aero

  and

  Director of Windows desktop is disabled (which is not..)

  Hi Hammyobob,

  Looks like the infection by the virus has taken its toll. The following suggestion may help you recover Aero on the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Steps to follow:

  a. go to start and type regedit.exe.

  b. navigate to the registry key next:

  HKEY_CURRENT_USER

  c. If the DWM registry key is not found, right click on Windows, and then select New -> key to create the new branch and name it as DWM.

  d. in the details pane on the right, create a new DWORD (32-bit value) named UseMachineCheck, and set its value to 0.

  e. in the details pane on the right, create a new DWORD (32-bit) value namedblur, and set its value to 0.

  f. in the details pane on the right, create a new DWORD (32-bit) value namedAnimations, and set its value to 0.

  g. restart the Desktop Window Manager Session Manager in Services in Control Panel (type Services.msc in start search), or run the following commands in an command with administrator privileges prompt:

  net stop uxsms
  net start uxsms

  h. try to enable and apply Windows Aero in Windows 7. Restart the computer if necessary.

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• graphics card does not support the Aero effects?

  Sapphire Radeon Vapor-X HD 7770 GHZ OC 1 GB
  DDR5 DVI-I/DVI-D/HDMI/DP PCI-Express graphics card

  1 x Dual - Link DVI, 1 x DVI Single-Link
  1 x HDMI (with 3D)
  1 x Display Port
  Display Port 1.2
  1100 MHz base clock
  5200 MHz Effective
  128-bit GDDR5 memory

  the SAPPHIRE HD 7770 Vapor-X OC Edition
  has 1 GB of more recent DDR5 memory,
  and is factory overclocked with clocks of 1100 MHz core
  and memory clocks 1300 MHz (5.2 GB/s into force) to deliver excellent performance
  Work or play with multiple monitors is becoming more and more popular.

  Windows experience index note my video card with a fat score 7.6

  and NOW windows 7 64 bit is tell me
  that my epic video card does not support the Aero effects?

  You owe joke... !!!

  Hello Dan,.

  Thanks for posting your query in Microsoft Community.

  I understand that you get the message that the aero effects are not supported by your video card. I would help you with the question. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the edition of Windows 7 installed on your computer (Home Premium, professional, Ultimate etc.)?
  2. What is the brand and model number. your computer?
  3. What is the exact message you get?

  The question could arise if Windows 7 is not compatible with the version of the driver or if the driver you are using, in particular, does not supports the Aero effects.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and then re-run the assessment. Check if it is useful.

  Visual effects Aero Glass in Windows are not working or displayed

  If the problem persists, try the following method.

  Method 2:

  See the steps in the following Knowledge Base article and check if the question is reproduced.

  Guided Help: the problems of Aero in Windows 7

  In addition, I suggest you refer to the section: Aero material required in the following article and check if the problem persists.

  What is the Aero visual experience?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

  I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

  Return the iPhone 4 and buy an iPhone more later from model.

  The iPhone 4 does not support any version of iOS iOS 7.1.2 above.

• HP Touchsmart 23 F202IN graphics card does not support the 3D Vision I can improve.

  The graphics card that is provided with this computer is NVIDIA Geforce 710 a, which is not compatible 3D Vision, what I can do about it?

  Can I call HP and tell them to update my graphics card with something that supports 3D Vision (I don't mind pay a supplement) but what is an ALL in one, I know the graphic card must be soldered to the motherboard which is a very long process...

  Also could I just buy a NVIDIA 3D Vision Kit and do the work in 3D?

  http://www.nvidia.com/object/product-GeForce-3D-VISION2-wireless-glasses-Kit-us.html

  This monitor supports 3D thingy?

  
  Im a developer of Windows applications

  Hefind wrote:

  The graphics card that is provided with this computer is NVIDIA Geforce 710 a, which is not compatible 3D Vision, what I can do about it? Nothing

  Can I call HP and tell them to update my graphics card with something that supports 3D Vision (I don't mind pay a supplement) but what is an ALL in one, I know the graphic card must be soldered to the motherboard which is a very long process... Unfortunately, no. HP is not in the business of upgrading systems of.

  Also could I just buy a NVIDIA 3D Vision Kit and do the work in 3D? No

  http://www.nvidia.com/object/product-GeForce-3D-VISION2-wireless-glasses-Kit-us.html

  This monitor supports 3D thingy? No. is not capable of 3d

  If you are determined to have a 3D compatible computer system, you will need to either build your own or buy a system that is capable of 3D.

  The HP Touchsmart 620-1080 3D Edition desktop PC is the one you should choose.

• Graphics card does not support Windows Aero?

  Hello world

  today I received the message telling me (after that I played a few hours) that my pc has problems of performance due to the Aero and it offers me to activate Windows Basic.

  I have this card (Nvidia GTX 750 Ti) for 2 months now and it never gave me problems so I'm wandering if it could be a hardware problem or just windows that ran a test on the graphics card all the 'X' days for the Aero compatibility.

  I ran the fix tool and it said that my GPU is not compatible with Aero (never had problems of performance in games activities or other).

  So I ask: is this a real problem? Can I ignore it and run Aero or it will cause physical problems in the future? Can it be a hardware failure or something similar?

  Thank you.

  The card should manage easily Aero and its effects. Go to this site where you can download and run the latest drivers...

  http://www.nvidia.com/download/index.aspx?lang=en-us

  The message should go away... :-)

• HP Photosmart ENVY: upgrade to Windows 10 now my SD card does not work!

  I bought my HP photosmart envy a few months ago.  I signed up for the free update to windows 10.  I had no problem until yesterday, I noticed that my SD card does not work.  When I insert an sd card that I know has the pictures, there is no pop up asking me what I want to do with photos.  When I go into my files to find that the external storage device manually there is no such folder showing.  What should I do?  I use my card sd slot all the time and now its useless.

  Hello:

  Please unzip the file in its folder (right click on the file zipped, select extract).

  Then after that he extracted, open the folder and then inside is a different folder, open that then double-click to run the Setup file of blue, then the driver will be installed.

• Need to reinstall Vista, but the DvD player does not work

  Alright. That is the problem. I installed windows 7 on my laptop because a virus crashed my windows vista and the lost disk. After installing windows 7 my dvd player wouldn't even appear or open. As there is no power going to it. Before installing 7 worked well. I want to downgrade back to windows vista. I had an iso, mounted police and when installed would not let me because the car is not active or something. Went to disk management in the config of the admin and active player. That I reset. When starting it stops saying BOOTMGR is missing press ctrl alt del to restart. I don't know what else to do. Help, please.

  Here's how to clean install Vista:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  Cheers.

  Mick Murphy - Microsoft partner