upgrade vista to windows 7 cannot print

Similar Questions

• Satellite Pro L300D - upgrade Vista do Windows 7

  Hello

  I'm trying to upgrade Vista to windows 7. After running the Advisor Windows 7 it tells me to uninstall and reinstall ATI Catalyst install Manager and Catalyst control center Branding.
  I'm ok with the uninstall but need help on how to do the reinstall.

  Could someone give me some advice please?
  Thank you.

  HH

  Hey,.

  This means that you are looking for a new display driver for Windows 7, right?

  Well, normally as you can get on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & download > download drivers

  I checked the Web from Toshiba site and there is a display driver for your model. Windows 7 32-bit and 64-bit, both are supported and it s version 8.634.1

  It is useful for you?

• Satellite P200 - 17 c - upgrade Vista to Windows 7

  I'm looking to upgrade Vista to Windows 7, anyone done this? And all their problems with drivers etc?

  Thank you

  Hello

  I put t know what you want to hear exactly now, but you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that this model P200 belongs to the PSPB6 series.
  Therefore, it seems that all the drivers available for Windows 7 32 bit.

  In general, Vista and Windows 7, I can say that new OS runs much faster and has never had a problem yet. I can recommend it! :)

• Upgrade Vista to Windows 7, files using the second internal hard drive and Windows Easy Transfer.

  I have a desktop pc with 2 internal hard drives.  A hard drive has the BONE and the second hard disk is a separate partition.  (I do not combine hard drives using RAID.)  If I upgrade Vista to Windows 7, the upgrade will be to reformat hard disks or just a hard drive with the operating system?  Should I remove the second hard disk of the computer just to be sure?  The second hard drive must be reformatted for use with Windows 7?

  Thank you.

  You must install the upgrade in the Vista operating system.

  For Windows 7 install questions:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• Upgrade Vista to Windows 7 or 8.1

  How upgrade Vista to Windows 7 or 8.1?    What is the best to use?  I would like to use Internet Explorer.  One of them comes with it?  Don't want to lose bookmarks.

  Thank you.

  From all versions of windows with Internet explorer,

  Win - 7 is the best on all that's left is win 7 pro

  http://www.Newegg.com/product/product.aspx?item=N82E16832416804

  Win - 8 or 8.1 is about the biggest flop M$ has ever released.

  If you want that your bookmarks and other personal files I would transfer to a portable hard drive or a flash drive if you can reinstall them.

  https://www.YouTube.com/watch?v=R_4MqobX4Mw

• Upgrade Vista to Windows 7 32 bit

  I was upgrading Vista to Windows 7, 32-bit, and what I now have is a white screen.   I waited all night to make sure that everything has been

  has changed.  Now what should I do?  If I reboot, Windows 7 starts, but it goes to a white screen and I can't do anything.

  Help

  I suggest boot you from the Windows 7 DVD, and then perform a custom installation:

  How to: perform a customized Windows installation

  See the section of the article for Windows 7.

  You can retrieve your personal files from Windows.old

• I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  Hello

  Can I know if you get an error message when printing PDF files?

  Also, please try the steps from the article below mentioned.

  https://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Thank you

  Abhishek

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Upgrade Vista to Windows 8 fails because it cannot tell if my PC is ready

  I downloaded the upgrade for $40 from Windows Vista to Windows 8.  I'm trying to upgrade from my office, but I get the message "something's happened, we can't tell if your PC is ready to continue the installation of Windows 8"  Try restarting the whole upward. »

  I tried to restart Setup several times with the same result.  Any ideas on how I can prepare my PC for this upgrade?

  On another another attempt to upgrade, I noticed a transitional message that windows 8 find all updates required but necessary to restart.  It has not restarted automatically but rather moved to the next step.  I manually restarted the computer and now, as of the beginning of the upgrade, the upgrade has started.

• C4480 does not print after upgrading Vista to Windows 7

  Hello

  I bought a C4480 & installed on my laptop running Vista.  I bought recently installed Windows 7, it & printer worked OK. 2 days ago HP sent the file: PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140.exe, (1/1, 205.09 M)

  I downloaded & installed, now the printer does not print. It scans ok just will not be printed. Called HP & said it was Microsofts problem. told by Microsoft of $ 80 or reinstall my computer back to the factory default settings. Not knowing much about computers I'm not want to do. The computer tells me the spool of printer off & to start but when I open the printer spool is on. I hope you understand that this is my 1st post.

  There is a patch for this here.  Try it!

• HP Laserjet 4 MP: HP Laserjet 4 MP - just switched to Windows 10 - cannot print

  Hi - I used my Laserjet without any problems on Windows 7 but cannot print now that I went to 10 Windows.   The Laserjet 4 MP is listed on the page of the driver for Windows 10 HP, but the directions for upgrading the driver doesn't seem to work or there is something that I'm not enter.

  In "Devices and printers", my printer shows already that it is selected with the green check mark.  When I go to "Add a printer", it does not find the printer, even when you use the option 'my printer's oldest  So I went the next step, try using the IP address. Print my printer Config pages to try to find the ip address/port, but nothing seems to match them.

  Any ideas would be greatly appreciated!

  I went through all the steps of the Windows Update, found on pilots of widows 10 for Laserjet page mentioned above, but this time, instead of choosing the LPT 1 port, I chose the USB virtual port (I remembered reading on that port for an alternative online), and it worked!  (LPT 1 was probably active before a few years ago, I bought a USB connector for the cable to the printer)

• Upgrade Vista to Windows 7 keyboard filter question

  I really need help with this...

  I have upgraded vista to the full retail version of Windows 7.

  Compatibility check says updating keyboard filter. I could not find much info about it and assumed it would not be too affect many except extra work I probly never use.

  Unfortunately, my keyboard doesn't work well at all.

  IM using HP-G30-260US laptop computer.

  I now disconnected the keyboard Ribbon and plugged a usb keyboard, a pain to use, but at least its working. I would really like to know a fix for this problem to get my job real keyboard and installation of windows 7 is already running on this computer, the upgrade, not a clean place. I tried to install a different Quick Launch buttons driver and uninstalled completely after windows 7 but without success.

  Please help me hehe

  Thanks a capture

  Matt

  Uninstall HP QLB and install it:

  Buttons lunch fast HP here

• Satelite A500 upgrade Vista to Windows 7

  I received my upgrade of Toshiba drive. I intend to do a clean install of Windows 7. I want to know is where can I get the software that came preinstalled on my laptop once everything is deleted when Windows 7 is installed. Toshiba Software, I want to say is the face recognition software, the camera WEB etc.

  One of my friends has a laptop computer from a different manufacture and he received 2 discs with the upgrade - one was Windows 7 program and other programs.

  Any help you can give will be appreciated.

  Thank you

  You can also use some drivers Vista, tools and utilities.
  What A500 do you have exactly?
  Win7 tips is available for your laptop model?

• Upgrading Vista to Windows 7

  I'm moving from Vista to Windows 7, but after that it checks the compatibility, it is said there are 2 things that may not work after and will not let me continue with the upgrade. They are: the storage CONTROLLERS: SCSI/RAID HOST CONTROLLER and UNIVERSAL SERIAL BUS CONTROLLER: VIRTUAL BOX USB.
  Virtual Box is not on my computer a plus and I'm not sure of the Raid Controller problem. How can I fix this so that I can continue my update?    Thank you

  You are in the Windows Update Forum.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner