Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

Similar Questions

• Unable to connect to the Windows Vista profile, receive the error message "logonui.exe - bad image".

  Original title: bad image Logonui.exe

  I have laptop Dell XPS M1530.  Last night when I tried to start the computer, it went through the movements until he got to the login screen.  Rather than get the profile to connect to, I got the error message following "logonui.exe - bad image.  C:\windows\winsxs\x86...\COMCTL32.dll is not designed to run on Windows or it contains an error. "When I click ok on the error message and wait for an another error message appears" logon.scr bad image. "  I tried to run the Startup Repair and restoration of the system without result.  I cannot lose the files on the hard drive, but have run out of ideas and options on how to solve this problem.  Someone at - he had this problem and managed to fix it?  I've exhausted the System Support of Dell, as they have failed to: "format the drive and restore to original state."  That is not an option right now.

  I went into the Commpand prompt and delete files that have been raised as errors.  When I rebooted, it came in fine.  I got the files I needd for backup and then rebuilt the system.

• Error, called "GfxUI.exe - bad Image".

  I have an error message which disappear from my Windows 7. It is called "GfxUi.exe - bad Image" and said that C:/Windows/System32/atiu9p64.dll is not designed to run on Windows or it contains an error. Then it asks me to resintall it but there is no option for this. It is more of a thing of substance; I can still run programs and work, but the error message does not disappear.

  Need help, please someone. Thank you

  Hello

  1. have you made changes on the computer before this problem?

  2. when exactly this error occurs?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Put your computer in a clean boot state to identify the application at the root of this problem.

  Place your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope the information is useful.

• error "logonui.exe - bad image".

  My daughter has an Acer computer and received the following error message: error "logonui.exe - bad image. I tried to re-boot the computer in Mode safe, but also invite command, it still shows the same error message. If you 'x' out of the box, or click ok, it will take you to a black screen. I'm unable to log in or do a system restore. Any suggestions?

  If you don't have a genuine plant Windows Vista disc or a recovery disk to do what Srimvas has suggested, you can make one at: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ using burning like software: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  For procedures on the system restore, see: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.

  For startup repair procedures see: http://www.bleepingcomputer.com/tutorials/tutorial148.html.

  Good luck and I hope this helps.  Please post back and let us know in all cases.  There are several troubleshooting steps we can try if these don't work (not much, but some). Lorien - a - MCSE/MCSA/network + / A +.

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Impossible to open the defragmentation, get error Defrag - mmc.exe - bad image

  Could not open the Defragmenter - error message: Defrag - mmc.exe - bad image. "The application or DLL C:\Windows\System32\mmcbase.dll is not a valid Windows image. Please check this against your installation diskette. »

  Hi ELCC.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• LogonUI.exe - Bad Image Vista Home Basic Dell Vostro 200

  Hello

  When I connect, I get the message Image LogonUI.exe - Bad.  When I click on message I get a black screen with the cursor

  but I an unable to access anything whatsoever.  No start menu. I tried to restart,

  Help, please

  Mike

  Hello

  You can see this thread and follow the procedure described by a. user.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/logonuiexe-bad-image-Windows-Vista/28af4577-cd49-4178-94de-47aa1b91cc84
  I hope this helps!

• LogonUI.exe - Bad Image C:/Windows/system32/HID. DLL

  The title of this post appears on my Windows Vista Home Basic PC when I start it and after I connect. C:/Windows/system32/HID. DLL is not designed to run on windows or it contains an error. Ive looked around the internet for a solution, the only real solution I found was to search for cmd, do a right-click Run as administrator and type sfc/scannow, or something like that. Then he did some stuff and he later said a few corrupted files found but has been unable to remedy. So, how to fix this?

  Hello

  The program SFC.exe writes the details of each operation audit and each repair operation in the CBS.log file. Each SFC.exe program entry in this file has a [SR] tag. The CBS.log file is located in the folder %windir%\Logs\CBS.

  Check the log file and post the logs here so that we can check what exactly is causing the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/928228

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• LogonUI.exe - bad Image (Windows Vista)

  When I turn on my Gateway laptop, I get a popup that says:

  C:/Windows/syatem32/Uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact you system administrator or the provider of software for support.

  Whenever I log on my computer, all I get is a white screen and a few popups saying that Explorer Windows and Windows Calendar has stopped working. I can boot into safe mode and with command prompt, but I still have the same pop up windows. I also ran the repair of the boot, the same problem, and I DO NOT have a disk for Installation of Windows Vista. ALL SOLUTIONS?

  http://DLL.ParetoLogic.com/detail.php/UxTheme

  Above is what it is.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the info above bridge of recovery to repair your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• LogonUI.exe - bad image, explorer.exe - bad image

  I receive many messages of error such as those listed in my title. The body of each message also said:
  "C:\progra~1\google\GOOGLE~1\GOEC62~1.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original installation media or the software support provider". Help! I don't know what that means! Something important might been accidentally deleted? Whenever I try to open anything I have tons of these messages of 'bad Image '. Everything still works well, according to me, but I would like to know how to solve this problem does not happen.

  I receive many messages of error such as those listed in my title. The body of each message also said:
  "C:\progra~1\google\GOOGLE~1\GOEC62~1.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original installation media or the software support provider".

  This means that a Google program is corrupted. Uninstall all google software, then download and reinstall whatever the ones you need.
  I hope this helps.

• Orphanage Owl error message: Photoshop:exe - bad Image

  I have this error with Adobe Photoshop CS5.

  With reading the other posts, I found an answer to this same question posted - except with CS4.

  He mentions the file plug-in and 32 and 64-bit. Here is where I get confused.

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came. How can I clean my mess now?

  I have no idea how know what is happening with 32-bit and what is happening with 64-bit... You could say, I do not know my songs and you would be right. Laughing out loud

  Help, please. I have benn ignore him for almost a year now.

  c.sewick

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came.

  No doubt.

  Remove all the plugins that have a date older than the CS5 plugins.

  And do not copy photoshop plugins from one version to another - many of them will depend on what is the specific version.  And while we try to test for problems of version, we can always test in the future :-).

• Dell - bad logonui.exe laptop image

  Hello, I have a Dell laptop and when I start it in the turn, before he arrived at the login screen, a mistake similar pop message and says the following...

  "LogonUI.exe - Bad Image".

  C:\Windows\systems32\avrt.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of the original installiation media or contact your system administrator or the provider of software for support"

  And after I click 'ok' to the message, it allows me to go to the login screen and my password and then press ENTER, then it just sits there and loads and loads and loads and it never opens the screen or anything like that.

  What I do or what might have caused this to happen?

  THANKS FOR ANY HELP! I really appreciate it.

  http://en.community.Dell.com/support-forums/software-OS/f/3524/p/18806333/18933039.aspx

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/18514433/18836199.aspx

  Read the information above from the Dell Community any similar problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Windows logon: LongonUI.exe - bad Image

  I recently received this message when you try to start windows:

  Longon window: LogonUI.exe - bad Image

  C:\Windows\system32\dwmapi.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  It gives me the message on a completely black screen, then if you click on OK or exit it message the screen remains black. I did some research on it and found that a recovery disk should help me with my problem.

  I don't have a recovery for my computer disk, so I ordered a via eBay windows 7 recovery disc, from a user with 100% + comments, I got tired of the to use to repair my system, using the system recovery options, but when I used it I got a new error:

  System recovery option

  This version of System Recovery Options is not compatible with the version of Windows that you want to repair. Try to use a recovery disc that is compatible with this version of Windows.

  I did some additional reading and also used the Bootrec.exe tool in the command prompt, but still no luck with the repair of my computer.

  Any help would be appreciated.

  I was going to reformat my computer soon, but I'd like to at least make it work so I can transfer all my files on an external hard drive first.

  Thank you

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you are facing in your Windows startup problems. I will certainly help you to question.

  The question might be if there is a file system corruption. So I would say that you want to run auto repair before you reinstall the operating system. To perform the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery (Windows RE) environment to resolve startup problems, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• "SkyDrive.exe - bad Image" Error Message box

  Whenever I boot, I get a box of titled error message: "SkyDrive.exe - bad Image" and the message reads, "C:\Users\Christopher\AppData\Local\Microsoft\SkyDrive\17.02010.0530\SyncEngine.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original excavation media or contact your system administrator or the provider of software for support. 0xc0000020 error status. "You kindly give me some pointers as precisely what to do here? Thank you!

  Hi Christophe,

  This problem may occur due to the infection by the virus or because of conflicts between the third-party applications.

  Have you done with the latest changes on the computer before this problem.

  Method 1:
  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  (1) data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  (2) the Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Method 2:
  If the problem persists, I suggest to start the computer in safe mode and check if the problem occurs or not. If the problem does not occur in mode safe run clean boot and check if it helps.

  
  Step 1:
  I suggest you to return the item and check if it helps.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Step 2:
  If the issue occur not in Mode safe run clean boot and check.

  Affecting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.