Upgrade XP to Windows 7, computer recognizes not all files on drive E:

Similar Questions

• Have Dell Dimension 2350 with windows XP computer recognizes the CD/DVD-rom drives but won't play CDs or DVDs

  Problem started with a code 39 error code when cumputer did not recognize the readers of CD rom. cure the problem of recognition, but still cannot read any DVD or CD should I replace the disk driver

  If AZEEZ N article did not help you, then try to reinstall the drivers.

  I had the same problem - the computer showed cd/dvd players, but he has not read cd'dvd. I showed it to a computer repair man and he said if reinstalling drivers does not help, then this means that there is a hardware problem and you will need to purchase a new cd/dvd-rom...
  I bought a new drive and now the problem is gone!

• Reader of CD/DVD of Equium recognizes not all files

  OK, I had this problem before and I think I've fixed it by uninstalling nero 6 but I did it again, but it's always the same :(

  My problem is when I put a CD it recognizes it but does not recognize the files that it contains.

  In Device Manager it seems that all is well no yellow exclamation point.

  I tried to delete the upper and lower values in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} registry but no infact available when I go to register it is not less or upper filters it.

  I am at loss - everyone has ideas please

  Hello

  Have you thought about a hardware problem?
  Eventually he s has a

  But first, you should check if the laptop can boot from the recovery CD.
  If so, then try to install the OS from the Toshiba CD and this would create the laptop back to factory settings

  Then you could check if it s able to read the CD or DVD.

• Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

  I just bought a Camileo s10 camcoder.
  So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

  I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

  I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

  Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

  I looked for answers almost anywhere, but so far I have had no response

  Hello nikfam,

  I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
  He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

  Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
  Please take a look at the right format.

  Have you tried another usb port? If you use a hub, check that there is enough power.
  I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

  welcome them

• Remote assistance from an XP machine on a Windows 7 computer does not work.

  Remote assistance from an XP machine on a Windows 7 computer does not work.  The connection expires whenever I try to connect.  Any suggestions?

  RA from Windows 7 to Windows XP is supported, but RA from Windows XP to Windows 7 is not supported unfortunately

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I

  I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I initially purchased and downloaded on my other computer. How can I still download it if the serial number does not appear in my plans and products page? I still have the drive and everything that came with it.

  Hello

  Please download the Lightroom 5 application from the link below.

  http://prodesigntools.com/Lightroom-5-DDL-comparison-vs-LR4.html

  Serial number - please visit https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if this helps!

  Kind regards

  Vivet

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA

• I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on my website source

  I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on the source code of my Web site completely offline?

  Thank you. Last time I looked into things with the description "Cloud", it seemed to me that you either need to be logged to the software work (possibly validate the rental date?) and/or your content of current things was 'in the cloud '.

  While I don't like the rental model, if I can make it work offline that may be an option.

  Fortunately, the machine still works, so I have little time to decide. It is likely that my existing sites in Dreamweaver 8 will be compatible up with current versions?

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• Windows XP, you see only not all files in Windows 7 shares

  I see an embarrassing problem that occur on two different sets of machines on different networks.  The initial symptom that led me to study was that software synchronization third laptop XP Pro SP3 computer a user has acted improperly, saying that some files in directories on a Windows 7 Ultimate 32 bit computer were gone, but they really were.

  I traced the problem in several directories on the Windows 7 machine display incomplete content seen on the XP machine network.

  For purposes of explanation, //Desktop/Folder is a share on the Windows 7 computer, which has 167 files it contains.  If you open this share on a networked XP Pro computer, it shows only 140 files.

  For example, File1.doc and File2.doc are both in this shared directory on the Windows 7 computer.  However, on the XP machine, File1 does not appear in the directory.

  On the Windows 7 machine, File1.doc and File2.doc are identical regarding permissions and attributes.  The only differences are the size and creation date.  Look at the rest of the 27 "missing" files in this folder, the results are the same - I see no difference.  The files are not password-protected.

  I have reproduced this exact behavior with the same data on different machines with the same operating systems.  All machines are completely up to date with respect to updates.  There is no detected malware on any of them.  They are on the same workgroup.

  This change in behavior has happened apparently quite recently that the user had no problem with the synchronization software for laptop until last week.

  Can anyone suggest what could happen here?

  Thanks for your reply, Jonathan.

  I traced the problem to Avast (any flavor).  It turns out that it's a known problem, but not a single notice of too many people.  It is really so when you try to run the software of synchronization between two networked computers and directories that you synchronize are affected by the bug of Avast as the synchronization software performs a very detailed comparison.

  When I uninstalled Avast on the source (Windows 7) XP machine could see all the files in all the network shares.  When I reinstalled Avast, the problem returns.

  I have a ticket in Avast on this problem.

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player will not play files .avi or .mpg - Error Message: C00D1199

  Windows Media Player won't play .avi or .mpg files; files which I know to be readable by Windows Media Player. In addition, this program has played these accurate files in the month of August. The files are readable on other programs. I searched other forums, but it is impossible to find an answer to this problem, except the recommendation of a codec - although I don't know how I have "lost" the codec in the past two months. Today, spontaneously and erratically, Windows Media Player recognizes the .mpg files, but not the .avi. Microsoft Security Essentials have installed and up to date, if it is not a virus. Have problems in other programs with the recognition of previously readable files. Not sure if it's related, so I'll post in separate... forums but I'll give you a link if you want to. Your help is greatly appreciated. Thank you.

  Hello

  Other players, such as iTunes and QuickTime, have been known to corrupt some files that
  then will cause this error.

  You received the C00D1199 error message using Windows Media Player. What follows
  information to help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1199&ContextId=68&OriginalID=80040218

  Windows Media Player C00D1199 - this also applies to Vista and WMP11
  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  C00D1199 errorhttp://www.updatexp.com/c00d1199.html
  
  ---------------------------------------------------------------------------------------------

  In addition to the information contained in the link above, you should probably update the codec.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 8.1.7 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 5.6.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">