Upgraded to v8 FF and no, it will not yet open, just says "not responding".

Similar Questions

• Accidentally, I installed upgrading Digital Publishing Suite, and now DPS will not work with my CS5.5. Is there a way to get the previous version?

  I tried to re - install the previous version several times, but I always get the error message:

  

  I even went to the extension initially downloaded and used to install the DPS, but that did not work. 

  N ° as says this message, DPS is no longer supported in CS5 or CS5.5. This was announced months ago.

• Safari crashes and all OS will not respond

  Hi all

  I have a great difficulty. It was the sixth time that I met this kind of problem. While web surfing with safari and with only two tabs open, the entire OS will suddenly insensitive and even the touchpad on my macbook pro retina does not work. Force quit with keyboard shortcut does not work either. Just whole operating system freezes and the last resort was to force closing down the entire mac. After the restart the mac, I launched the console and this is what I received during the time that the OS freezes.

  What should I do? It is a type of hardware failure or it's a bug to Apple?

  Thank you.

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:29.008 PM]: < < < < VT - DS > > > > VTDecompressionSessionWaitForAsynchronousFrames: WARNING: wait 5 seconds for a video decoder complete asynchronous frameworks; Maybe it is stuck or has a buggy way that does not make a framework?

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:33.955 PM]: [18:55:33.955] < < < < CRABS > > > > crabsWaitForLoad: [0x7f9ef1efb940] Wait time-out --1001 (msRequestTimeout - 1).

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:33.955 PM]: [18:55:33.955] (Fig) reported err =-1001

  18/05/2016 6:55:34.325 PM watchdogd [313]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive

  18/05/2016 6:55:35.332 PM watchdogd [313]: [watchdog_daemon] @(__wd_service_report_unresponsive_block_invoke) - could not collect a spindump for (com.apple.WindowServer)

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:39.009 PM]: < < < < VT - DS > > > > VTDecompressionSessionWaitForAsynchronousFrames: WARNING: wait 10 seconds for video decoder complete asynchronous frameworks; Maybe it is stuck or has a buggy way that does not make a framework?

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:42.960 PM]: [18:55:42.960] < < < < CRABS > > > > crabsWaitForLoad: [0x7f9ef1efb940] Wait time-out --1001 (msRequestTimeout - 1).

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:42.960 PM]: [18:55:42.960] (Fig) reported err =-1001

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:51.966 PM]: [18:55:51.965] < < < < CRABS > > > > crabsWaitForLoad: [0x7f9ef1efb940] Wait time-out --1001 (msRequestTimeout - 1).

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:51.966 PM]: [18:55:51.966] (Fig) reported err =-1001

  18/05/2016 6:55:51.966 PM com.apple.WebKit.WebContent [1346]: [18:55:51.966] < < < FFR_Common > > > FigFormatReaderCreateForStreamReturningMatchingContainerLabelType: * could create no drive format for URL 09586875_876228479_n.mp4? efg = eyJ2ZW5jb2RlX3RhZyI6InN2ZV9zZCJ9 https://fbcdn-creative-a.akamaihd.net/hads-ak-xft1/v/t42.1790-4/13123714_1082414 & oh = f25f2797fcd6b01 43090c3dd3888d63d & oe = 573 C 8365 & __gda__ = 1463580380_d06910a447965547d063de000b5729f 8 FileType "?" InstantiationError de SuggFileName (null) video/mp4 MIMETYPE =-1001

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:51.966 PM]: [18:55:51.966] reported FigFormatReaderCreateForStreamReturningMatchingContainerLabelType err =-1001 (instantiationError) (error of creation of the FormatReader) to /Library/Caches/com.apple.xbs/Sources/CoreMedia/CoreMedia-1731.15.202/Prototype s/FormatHandlers/FigFormatReader_Common.c line 2157

  18/05/2016 com.apple.WebKit.WebContent [1346 6:55:59.011 PM]: < < < < VT - DS > > > > VTDecompressionSessionWaitForAsynchronousFrames: WARNING: wait 20 seconds for video decoder complete asynchronous frameworks; Maybe it is stuck or has a buggy way that does not make a framework?

  18/05/2016 6:55:59.473 PM watchdogd [313]: [watchdog_daemon] @(_wd_daemon_service_thread) - service (com.apple.WindowServer) reported as insensitive

  If your Mac is running v10.11.4 as indicated in your profile, update your Mac software.

  Open the App Store, and then select the updates in the App Store's menu bar.

  Your Mac may restart several times during the update process. It's normal.

  Then try Safari.

  If this does not help, a Safe Mode boot removes system caches can help.

  Follow these steps to start in safe mode.

  Start or restart your Mac.

  As soon as you hear the startup tone, hold down the SHIFT key .

  Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try Safari.

  On Safe Mode

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days.

  Original title: I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

  I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

  Hi Mike,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  I suggest you to go through the following articles and check if that helps.

  Error message when you start Windows Vista: "your activation period has expired".
  http://support.Microsoft.com/kb/925616

  Resolve activation problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  How to activate Windows Vista
  http://support.Microsoft.com/kb/940315

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  For more information:

  Validation failed? These scenarios may help to explain why.
  http://www.Microsoft.com/genuine/downloads/FailureScenarios.aspx?displaylang=en

  If anything in my post is not clear or if you have other questions, do not hesitate to let us know. It is our pleasure to be of service.

• I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

  How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

  I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

  What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

  I am a fool! I can't believe what's happening.

  Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

  Thank you all!

  Sally in Georgia

  Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

  Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

  HTH,
  JW

• If we improve windows10? photos and personal data will not be deleted na?

  If we improve windows10? photos and personal data will not be deleted na?

  Nope.As windows 10 is an upgrade, the installer must keep everything.

  Make sure that you back up the data before the upgrade to avoid screwing

• I adjusted the height of the message pane, and now it will not pass (and contains text that overlap in the folders pane!)

  I adjusted the height of the message pane, and now it will not move. Overlaps the text in the files pane, and it is making it really hard see my messages correctly. I tried to uninstall Thunderbird, and reinstall, but the problem is still there. Help!

  Have you tried restarting your computer?

• The computer date went before a day, switched back and now Firefox will not record history.

  Hey guys! My brothers and sisters have decided to play a trick on me and changed my computer to the front of a week time (panic ensued). I changed it to the current date, 07/30/2104 21:18 (at time of writing), and now Firefox will not trace of my story. Just one day, I changed the time on the computer to the front and then Firefox will begin to record history. Changed, there again at the present time and also return one day and it will not save. Story work for Google Chrome and Internet Explorer.

  TL:Dr - Firefox became the TARDIS and stepped forward in time to save the history.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

  With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

  Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

  Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• I was on the site of the Bank of talents of Michigan for unemployment before and now it will not open... I emptied my story and scanned my laptop for all problems and all out ok. But if I use aol it will load the page very well.

  I've been on this site before on FireFox and now it will not load. But all other websites work fine.

  https://www.michworks.org/MTB/user/MTB_EMPL.EntryMainPage
  
  No problem here with Firefox 3.6.13 under WinXP.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...