upgrades to Vista error code A 80071, 30

Similar Questions

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

  Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

  happysail,

  see if this sugesstion can help you:

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsupdate&p=1&tid=958b1d34-138d-4cc2-880f-36cd5cbc4a79&mid=958b1d34-138d-4cc2-880f-36cd5cbc4a79>

  Please let us know if that helps.

  hope this helps, if it's waiting for more answers, please.

• Update fault of maintains and shows 80070643 and error codes A 80071, 91

  I keep trying to update windows rum for the "Security Update for Windows 7 for x 64 systems" and similar updates, but they keep failing to update and display 80070643 and error codes A 80071, 91. Troubleshooting is not helping me to solve it. Help, please.

  Sean1420,
  You can download the update on your computer and then install it directly from there.  I would say that the execution of a clean boot before you perform the installation.  Post back with the Info requested PA wear and results trying to manually install the update.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code A 80071, 91

  I get error code A 80071, 91

  I saw there was a response where I have to type something in the cmd screen, but I don't know how to log on as an administrator and even less follow these instructions!

  My laptop has not updated for over a year!

  topper71,
  You have to look at this thread and display all the information requested:
  What to post in the Windows Update forum

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install vista error code 20000008 upgrades

  Have tried several times to install the update to windows, but I get is error code 2000008 and try again. any body can help with this problem.

  Thank you

  Hello

  1. don't you make changes to the computer before the show?
  2. What is the accurate and complete error message you get?
  3. What is the KB updates that you are trying to install?

  Method 1
  I suggest to clean starts and then download and install the updates.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you to reset the Windows update components.

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 3
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Vista - Error Code: 3712 (cannot install update KB951847)

  When I try to install

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  I do Installation status: failed and the error details: Code 3712

  What can I do to fix the problem? Help, please.

  http://support.Microsoft.com/kb/923100/en-us

  Try the tips on the link above.

  If this does not work:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - Error Code: 80070490 (cannot install updates)

  Tried everything but one thing, could you help and tell me what one thing please. I am running Vista Business 32-bit preloaded when bought.  problem started 2 weeks ago when I got 3 three updates 1 = update for Windows Vista (KB2158563)

  Installation status: failed

  Error details: Code 80070490

  2 = update for Microsoft Silverlight (KB2416427)

  Installation status: failed

  Error details: Code 663

  3 = update of security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)

  Installation status: failed

  Error details: Code 663

  They will not charge and States windows could not search for updates when tring to update.

  Any help bullyboy1

  Start with the first error - 80070490

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista - Error Code: 8000FFFF (cannot install KB929777)

  Error code 8000FFFF when I try updating windows via windows update. the update is for vindow vista (KB929777).

  I tried microsoft fix it but every Helen I try even once it does not work.

  Also I can not upgrade to internet explorer 8 probably for this reason.

  Here is an article on this exact error code as it applies to updates that can help with your problem:http://support.microsoft.com/kb/946414.

  If you have 4 GB of RAM, it is often the cause of this problem, and in this case, a possible solution is to go down to 2 GB of RAM, do the update, and then re-install the other 2 GB of RAM.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista - Error Code: 646 (cannot install KB2092914)

  Problems when updating error when software get error codes 646 kb2092914 reading

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Code: 8024002D (cannot install the update of work KB2092914)

  Try to update as above but asking for disc of works that came pre-installed - actually I have no disk. Upsate claim to be important and tries to update every day. WHAT SHOULD I DO?

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Code: 646 (cannot install KB202914)

  I get the error code 646 for update KB202914... How I solved this problem?  I have Vista and my computer is a HP.

  Thank you very much.

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download it manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Code: 646 (cannot install KB2062614)

  error code 646

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Code: 80770643 (cannot install the Office updates)

  I tried to set Office Source Engine Manual. Then tried to install, always was error.

  I manually deleted Net Framework 1.0, 1.1, 2.0, 3.0, and restarted and downloaded 3.5.Then .NET Framework 3.5 SP1 .NET Framework 1.1 and Net Framework 1.1 SP1.restarted. Installed in good condition and checked out restrted then updates downloads and download Net Framework 4. rebooted and tried to download the 4 updates for Office 2003. Yet received Werror!

  I downloaded the .NET Framework cleanup tool. He ran, then rebooted, installed Net Framework 3.5SP1, 1.1 and 1.1 SP1. Resarted and update downloaded for Framework 4. updated and tried to install updates for Office 2003 Same error.

  I get this for the fourth update, installation, 1/2 way through what the error message u [p.

  I tried every thing Word for word, no luck in Help topics.

  Thanks in advance

  Doug

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - Error Code: 643 (cannot install the Office updates)

  I'M TRYING TO UPDATE MICROSOFT OFFICE WINDOWS, IT ME SAYS TO GO TO ADMINISTRATIVE TOOLS, DOUBLE-CLICK SERVICES AND THEN FIND OFFICE SOURCE ENGINE (OSE) AND DOUBLE-CLICK IT TO OPEN THE SERVICE PROPERTIES, CLICK THE STARTUP TYPE LIST, CLICK AUTOMATIC (DELAYED START), THEN CLICK APPLY ONLY PROBLEM IS THAT I DO NOT DARE ON THE LIST TO MAKE THIS RESOLUTION. I HAVE WINDOWS VISTA HOME PREMIUM PROCESSOR-1250 2,00 GB RAM HOME-COMPUTER-THANK YOU

  Please do NOT post in all capitals.

  It is considered as shouting and almost impossible to read.

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner