Upgrading RAM problem

Similar Questions

• HP Pavilion e002au-15 l: upgrading Ram problem

  Hi all

  I think to upgrade the RAM for my "HP Pavilion 15-e002au Notebook PC' and am faced with questions, some HP providers say I could go to 16 MB whereas some say it can withstand only 8 GB. Not sure which is correct and that the approval, please advice, my current setup is less to:

  OS: Win 8.1 - 64 bit

  2Memory containg 4 GB RAM Slots

  Please advice if I can spend my current GM 8 to 12 OR 16 GB of RAM.

  Thanks in advance

  Anil

  Hello Malygris1

  Thank you for your help

  Concerning
  Anil

• 32-bit to 64-bit upgrade RAM problems

  I recently went from 32 bit to 64 bit of Windows 7 Pro following the 'unofficial' resettlement Wiki (the second time around) to the letter.  Here what's happening: bought two sticks of 4 GB of DDR3 1600 MHz RAM 1.5 volt.  It is fully recognized in BIOS Rev A16. 3.8 GB is used and works perfectly under Windows 32 Bit.  When I attempt to load Windows in 64 bit I get 1) white screen to repair Windows loop - A & B charge 2-BSOD DIMMS when each stick is loaded in DIMM A only.

  The tension is incorrect?  Why these modules work perfectly in 32 bit?  Should I exchange for 1333 MHz to 1.35 volts?  Please notify

  Generally, I would go for Crucial RAM on Dell systems. We find that they sometimes accept always RAM of other providers. In this Crucial case is 1.35v modules:

  http://www.crucial.com/upgrade/Dell-memory/latitude/latitude+E6410-upgrades.html

  They also have PC3-12800 modules that will be the fastest. You can also consider an also however high capacity SSD are still quite expensive.

  This former pilot hidden, I'm not sure. Looking around it seems related with the Dell drive:

  http://ftp.Dell.com/app/Dell_Reader-2-0_A06_R272851.exe

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/latitude-E6410?driverId=4RM8G

• Upgrade RAM problem new Alienware 15, 4 no beeps no boot.

  So, I just bought a new alienware 15 and I've had good compatible ram for an upgrade, according to dell recommended ram for this computer.  He also worked in my previous alienware 14.  I took the stock of ram (2 x 4 GB @1600 mhz) and set (2x8GB @ 1866 mhz) Corsair vengeance and the current bios does not recognize them.  A04 is the newest bios.  Any chance Alienware will come out an upgrade of the bios to accept RAM like this.  the Alienware 14 down them without flaw.  Model number on the upgrade of ram is CMSX16GX3M2A1866C10

  Thanks for any help.

  CropTop

  Your RAM sticks new work at a voltage higher than the laptop takes. The laptop uses 1.35v DDR3 or DDR3L RAM.

• Upgrading Ram problems

  Hi all

  I have a R4 Aurora alx 2012 build

  Sandy bridge i7 3820 gtx 980 sli, 8 gb of ram 1600 mhz cpu

  The island problem is ive bought 16 GB 4x4GB Corsair dominator platinum 2400 mhz ram and it does not start when it is installed?

  Ive tried all imaginable configurations with the sticks themselves, reset the cmos jumper, removed the cmos battery etcetc and still no joy.

  The system turns well but no signal on the screen even if all the lights of the fans and everything seem to work very well? There is no beeps at all, and obviously the Tower seems to think his job well, but no signal.

  I have replace the old 8 GB 1600 mhz original and everything sticks works fine?

  Any help would be greatly appreciated as I am scratching my head after having exhausted all remedies?

  Thank you

  Hi Steant,

  Looks like you've done what you can do. In this case, seems to me that the Aurora R4 is not compatible with 2400 MHz RAM. That or latency CASE of Aries is off from the design of the system.

  If you mixed the RAM, old and new, it works? Put 2 sticks of the original in both slots and the privateer in the other slots to see if you get anything then?

  ~ Jim

• HP Pavilion b000no-13 upgrade RAM, problem with disassembly.

  Hello!

  I recently bought a HP Pavilion 13-b000no (I think that it is a "Europe/Scandinavia" model only) and have decided that I want to add 4 GB of additional ram (I checked that it is compatible).

  I searched all over the internet for the same model or similar on how to open it, but have not found anything useful. I then tried to do it myself, located all the screws unscrewed the but found that I couldn't open the back plastic without a chance to break.

  Here are some pictures of my attempt (too big files so had to use imgur).

  In yellow are all visible screws that I could find.

  Red, four additional screws under stickers (down two don't have behind them).

  Green is where I could "pry" open less than an inch and see the internal parts.

  Top of page interim sticker had no screws under.

  http://imgur.com/j8loKXj

  Here is a better view of the area where I could lift open the plastic a bit.

  http://imgur.com/KUh0gCh

  View of the keyboard where I can't find any place to 'pop' to the top (sorry for the finger) plastic.

  http://imgur.com/o7MbfXQ

  I tried to find a similar cell phone sold in the United States and this one comes pretty close, he has the same coverage as mine by the look of it.

  I appreciate all the help I can get!

  Thanks in advance!

  Here is the HP Maintenance and repair of your model that has detailed directions for disassembly.

  HP series 13 maintenance & repair manuals

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• Satellite Pro L20: I have problems of havi upgrading RAM

  I have problems to upgrade Ram.
  Sat Pro L20

  I have 2 sticks of 1 GB each, I tried in each slot and they work, but not all. Speed and size are the same but not associated. (apparently shouldn't matter)
  I'm annoyed about it, I'm sure it worked before, when I got a 1 GB and an assembled 256 MB

  Hello

  the modules are completely identical? They come from the same manufacturer? If not, then your problem is solved and you should go to the store where you purchased this RAM and exchange for a compatible.
  Usually this phenomenon appeared in only two cases:

  1. the modules are identical but one of them is faulty and it is the reason why they start won´t when it is matched
  2. the modules are not identical or not, from the same manufacturer they also start won´t when it is matched

  That's it, my friend. Nothing more to say.

  Welcome them

• HP ENVY 23-d107er: upgrading Ram and processor

  I want to upgrade RAM, up to 16 Gb. Help me, please - I don't understand how to set the compatibility of frequency and CASE latency of RAM and motherboard (sorry for my English). My motherboard frecuancy is a...

  Memory how much my motherboard support?

  Can I install DDR4 memory or not?

  Or "the best"type of memory is DDR3L?

  SO-DDR3 16 GB (2x8Gb) PC15000 - 1866 MHz Kingston HX318LS11IBK2/16?  -1866 MHz frequency

  If my choice is wrong, maybe I could install this (also DDR3L) RAM:

  16Gb (2x8Gb) SO-DDR3 PC12800 1600 MHz Kingston CL9 HyperX HX316LS9IBK2/16 Impact black? -1600 MHz frequency

  or

  Kingston HyperX Impzact [HX316LS9IB/8] SODIMM?

  And could you give me a tip of advise on upgrading the processor?

  The only choice is i7 - 3770 s?

  Hi there @_Alexei_,.

  Welcome to the Forums of HP Support!  I understand that you are looking for more information on CPU and RAM upgrade options for your computer.  I'm happy to help you with this.

  Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB) for your computer, it lists the upgrade RAM and CPU information.

  Here is the information of supported RAM:

  Dual channel memory architecture two DDR3 SO-DIMM (204) media pins
  PC3-10600 (DDR3-1333)
  PC3-12800 (DDR3-1600)
  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SO-DIMM (8 GB only available on systems using processors Ivy Bridge)

  Supports up to 16 GB on 64-bit computers (only available on systems using processors Ivy Bridge 16 GB)
  Supports up to 4 GB on 32 - bit * PC * PC 32-bit cannot resolve a full 4.0 GB memory.

  Also, here is the CPU of the same document information:

  TDP: Varies according to the processor
  Socket type: LGA 1155
  The motherboard supports the following processor upgrades:
  Intel Core i3-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i3-3xxx (Ivy Bridge) Dual Core up to 55W
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core up to 45W
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core up to 65W
  Intel Core i3-2xxx (Sandy Bridge) Dual Core up to 65W
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core up to 35W
  Intel Core i7-2xxxS (Sandy Bridge) Quad Core up to 95W
  Intel Core i7-3xxxS (Ivy Bridge) Quad Core up to 65W
  G6xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G6xxT Intel Pentium Dual Core (Sandy Bridge) up to 35W
  G8xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G20xx Intel Pentium Dual Core (Ivy Bridge) up to 55W

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Upgrade Ram on a Netbook NB200 - 00L

  I gave to my two daughters a Netbook Toshiba NB200 - 00L. Both came loaded with Windows 7 Starter. If I just upgrade to Windows Home Premium, it will slow down computers. I was told that the maximum ram that can take netbooks is 1gig. However, I keep seeing that people are upgraded to 2gigs. I want to upgrade the ram so that Windows Home Premium will work better. Can someone enlighten me on this subject. Upgrading ram Home Premium support will be more effective? Also, is anyone Home Premium running on their netbooks without upgrading, and it is really slow? Thank you

  Hello

  AFAIK NB200 can be upgraded to 2 GB of RAM. Therefore, you can check the specs on the Toshiba site!

  I m not NB200 owner but I improved my other laptops equipped with modules from Kingston. I've never had a problem with these modules. They always run stable and don t make problems.

• Satellite A105-S2051 and XPSP3 - upgrade RAM and hot key error

  Merry Christmas together,
  Please can some mention help: have Windows XP HOME SP3

  1. recently tried to improve my Satellite A105-S2051 950Mo to MAX 2 GB RAM. I have x 2 places available.
  2 a RAM problem, pc would not even turn when the two new ram sticks have been installed.
  3. If x 1 old used module and x 1 new stick of ram, pc would not record even installed extra RAM? After discussion with the manufacturer recommended to also upgrade my old BIOS suppliers, I did it via the load - SAME support.
  4. then they recommend - sent back 4 RAM chip, they returned with the type of chip 8,.
  5. upon receipt, PC would not turn on once more if the two 1 GB installed? While could then install x 1 old + x 1 new, pc recognizes the additional ram 1 x, 1.36 GB memory stick.
  6. have you tried to load keyboard shortcuts available on download media files to find error - Toshiba ACPI common Modules (TVALD) missing?
  8 tried to load files TVALD, to then find error - TVALZ DRIVER FAILED? aaaaaaaaaaahhhhhhhh
  Any help would be most appreciated, Please help!

  Kind regards

  Paul.

  There is no reason to discuss on the RAM upgrade, because things are clear: RAM upgrade will be successful if you use only compatible modules and module 1 GB for your laptop with PA3411U-2M1G part number.

  Use two of them, and everything will be OK.

  Back to WXP stuff.
  Installation of WXP can be quite complicated as all things, especially specific tools Toshiba and public services must be installed in the correct order. Before you begin to install Toshiba stuff, you must install common modules. It is a fundamental tool, and it must be installed first. Problem is that we support for your laptop model page, I can't find common modules for download.

  What you can try is to install from the European page. You can find it HERE. Check it out.

• Upgrade ram A60 - need help please

  I hope that I will find closure to a long saga Finally, since late September, I looked to upgrade my Equium A60 memory, first of all, I ordered a microdirect Office ram chip (I know I know, really stupid thing to do...), then I ordered the good chip (from microdirect), but it did not work, I recently bought RAM from amazon , but they sent ram stones which, when it is too big for my expansion slot, and when I got the RAM, they sent me the same chip that I received before

  I was ordering pc2100 512 MB SO - DIMM 200 pin, 266 MHz, which has been previously compatible comfirmed in you many on these forums.

  now, I found the ram chip to the: http://www.crucial.com/uk/store/MPartspecs.Asp?mtbpoid=FF2F2894A5CA7304&WSMD=Equiu m + series + A60 & WSPN = CT419100
  crucial who say are compatible, but it is pc2700,.

  This chip compatible, or good crucail evil?
  are also critical a company worthy of confidence to buy online?

  Congratulations to all the

  Hey Jake,

  I can't comment on Crucial given that I have no first hand experience of their products or services, but I used upgrades RAM of Orca logic in the past with no problems at all (I currently have two of their RAM modules in my SA30).

  Their web site has a Finder memory, then I'd say comparing your RAM specifications with Orca. The URL is: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14209&ft=m&St=3

  Kind regards

• Upgrading RAM on Satellite L555-10R

  Hello

  I have a satellite L555-10R, Win 7 64 bit, main Board TOSHIBA KTWAA Intel GM45/GM47 chipset, 1.9 BIOS, CPU Intel COre 2 duo P7450;

  I want to upgrade ram 2x2gb (SAMSUNG) to 2 x 4 GB (CORSAIR). Only the ram that I put in the location #1 is recognized as a result system starts and detects 6 GB of RAM. When I put the RAM 2nd Slot #2, the PC does not start. It seems that it does not detects hard (the LED on the front of the PC don't not ligth during startup). I can't go into the BIOS (even if I press the F2 key), black screen, all I can do is power off.

  I'd appreciate your help, if you have an idea.
  Thank you

  VLM

  Hello

  First some general information on your machine:
  Your laptop can be upgraded to the top 8 GB and max upgrade, you can use both modules of memory of 4 GB.
  Compatible 4 for GB DDR3 - 1066 MHz apart number PA3677U-1M4G. Module of memory with this part number is tested and 100% compatible with your device.

  If you check this forum you will find number of threads as your one, where people try to level of RAM using Rams Corsair and spoke of the same problems. Obviously the reason for non-working machine is compatibility issue with these RAM modules.

  The 'value' Modules of RAM use many markets good chips using several banks/channels, which can cause problems of compatibility with some chipsets/CPUS.

  I highly recommend to use high quality and 100% compatible modules of RAM from Toshiba or Kingston.

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• HP DV4-1502TU: upgrading RAM for laptop HP DV4-1502TU

  I want to upgrade RAM 3 GB to 8GB for my laptop HP DV4-1502TU laptop. Please let me know if it can be upgraded to 8 GB and if yes let me know cost of 8 GB of RAM and where to get. I live in Mumbai, India.

  Thank you very much

  Vaibhav

  Hello @VaibhavDalavi,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the memory Modules and wanted to help you!

  According to your specifications, your laptop can support up to 8 GB.  For more information about prices and/or purchase, please contact HP support by phone.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

  Hey all,.
  There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

  The long story...
  my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

  his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

  so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

  We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

  However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

  Cut to the Chase

  The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
  I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

  We are working on PC is a:
  HP DC 7100 CMT
  Windows XP SP2

  current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

  tried to upgrade RAM parts:
  Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

  more

  Memory Dell [1 gb ddr] (mhz are not)

  I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

  Thank you and best regards,
  Chris

  Hello:

  You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

  The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

  Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

  See the table below on page 16 memory configuration.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187