upgrading to service pack 2 and service pack 3

I need to upgrade my computer with service pack 3 SP2, but I get a message indicating that... "' Web site has encountered a problem and cannot continue"... what to do then?

Download and manually install the sp3 then install all updates:

http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

Tags: Windows

Similar Questions

  • I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

    I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

    Hi BartlettNYC,

    Please see the links below, to solve the problems with Window XP SP3.

    Steps to take before you install Windows XP SP3.

    http://support.Microsoft.com/kb/950717

    How to troubleshoot a windows XP SP3 Installation failure.

    http://support.Microsoft.com/kb/950718

    Good luck.

  • Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

    original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

    Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

    I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

    My internet keeps acting like dial upward because of this and I have cable internet!

    Help, please!

    This day SP4?

    Only in appropriate cases:

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    Just in case where it is .NET Framework 4 -

    You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

    To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

    • Click on start/Orb and click on Control Panel.
    • Go to the program and features.
    • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
    • You should have the choice to repair or uninstall/change, click it.
    • This will then give you the opportunity to fix it
    • Select the repair option.

  • Can I use Windows 7 Upgrade media to upgrade a Vista computer that has not been upgraded to service pack 1? Can I use the option of custom Setup for Windows 7 Upgrade media? I would go from Vista Home Premium to Windows 7 Premium.

    The computer on which I am trying to upgrade is vascular under Vista Premium, but it was never upgraded to Service Pack 1. He has a problem with PIECES that is caused by a defective ntdll.dll module and so the updates do not work. Windows Upgrade Advisor tells me I must update Vista SP1. I really don't want to spend the time to solve the problem of Vista. I would like to just do a clean install using the custom install option on the Win7 upgrade support.
    Help.

    Wrong forum. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

    That being said, you can not use an upgrade to Win7 edition to make a clean installation on a computer running Vista without SP1 installed, but you can buy a complete edition of Win7 (detail) and install it after formatting your HARD drive. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • cannot upgrade to service pack 3 for xp pro, that it keeps telling me to contact free support

    simple cannot be upgraded to service pack 3 for windows xp pro. Installer gives error and said to contact microsoft

    Hello

    -What is the error message right installer that you receive when trying to install Windows XP SP3?
    -What is the version of Windows XP is installed on your computer? (SP1, SP2, SP3)
    -Did you do changes on the computer before this problem?
     
    I suggest you to see link and check if it helps.
    Learn how to install Windows XP Service Pack 3 (SP3)
     
    Response with more information to help you further.
    Hope this information helps.

  • What are Service Packs? Can I upgrade to Service Pack 2 for free? If yes how? If I update it will help or hinder my system? Any pack is better than another?

    Windows Vista Service Pack (basic information)

    Hello

    I know this may seem a simple/stupid question, but I do not understand what are "Service Packs".  I don't know much about computers.

    I have restored my laptop to the factory setting today and I reinstall my programs again.  I am trying to install a new program as well (Autodesk Inventor 2012).  The installation says I can't because I need Service Pack 2 and I only have Microsoft Vista Home Premium (Version: 6.0.6001 Service Pack 1 Build 6001).

    What are Service Packs?  Can I upgrade to Service Pack 2 for free?  If yes how?  If I update it will help or hinder my system?  Any pack is better than another?

    Thanks for the information and assistance that you can give.

    AstoriaBoro

    You can install Service Pack 2 very simply - go to Windows Update and check for new updates - then install all available updates.

    Once they are complete, return again (after a reboot) and do the same thing - repeat until there are no left.

    Along the way you will be installed Service pack 2 :)

  • Update for Windows XP (KB2964358), upgrade of service SP2 to SP3?

    I went on the website and tried to download the KB2964358 update), wouldn't DOWNLOAD says I need service pack 3. Where can I go to upgrade (download) service SP2 to SP3?

    I have Windows XP Home Edition Version 5.1 Service Pack 2 Internet Explorer 6.

    Last Friday, I got a virus and did a non-destructive recovery from my system. Before that, I had IE 7, anyway to extract the files from my PC?

    Hello

    The problem with viruses on the computer, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner.

    Here is the link for the Microsoft Safety Scanner which is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    Note:

    Data files that are infected must be cleaned only by removing the file completely.
    which means that there is a risk of data loss.

    To download and install Windows XP SP3 see the link provided below.

    How to get Windows XP Service Pack 3 (SP3)

    Hope the helps of information provided. We know the results.

  • I need help to upgrade my services

    0217747365 - Customer Support case. I am trying to upgrade my services. My needs are not met, and I'm frustrated with the help chat is only not available. I do not see a subscription formula that matches my criteria, I understand that it would be better to let the customer support to provide me with assistance to make the process go faster. So far, I've spent an hour more time that I had fun on this problem and the idea that he is now. If all goes well, there is a useful community responded, your time would be greatly appreciated as well.

    Thank you

    Cory

    Something for 2 users on CC and I wanted to take a look at the swarm of Marketing. Unfortunately my login information is not allow me access to the applications/services marketing. I made a call to customer service that has taken far too long. I enjoyed you responds @ Pattie-F. My issue is resolved for now.

  • I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

    Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

    Thank you for your help. Here are the answers your request:

    "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
    Complete error message: "Missing Component - required component Media Center is.
    missing. Please contact the manufacturer of your hardware.
    KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
    The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

    This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

    Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

    The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

    Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

    Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

    Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

    PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

  • I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi mapo1477,

    1. do you get an error at startup of the system?
    2 have you tried to start the computer in safe mode?

    If you do not get any error message, then we recommend you to start your computer in safe mode and check if it starts successfully on the desktop. If it starts in safe mode, and then restore the computer. To do this, try the following steps:
    a. see the description of the options course in Windows XP Startup Mode
    b. Once you have started your computer in safe mode, restore the computer.
    See How to restore Windows XP to a previous state
    c. start the computer and check if the system starts in normal mode.

    To install Service Pack 3 successfully, see steps to take before you install Windows XP Service Pack 3

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • intend to upgrade to vsphere 4.0 and need help

    someone has upgraded to vphere 4 again and suggestions or the steps necessary to succeed.  Thanks in advance.

    What are the types of hosts will you update? In most cases, you can use VMware Update Manager for ESX4i and vSphere 4.0, because you can't make a room upgrade with vSphere 4.0 CD. If your environment is lower, then 10 hosts, then use Host Update Utility to perform the upgrade, which is fairly easy or install base plug-in and configured VUM and sanitize it massively if you wish and plan accordingly with VMotion feature so that you have no downtime or need to use Storage VMotion, if you need to migrate between stores.

    Once you have upgraded your hosts all vSphere 4.0, you have an option to clean the ESX 3.5/Boot and files in directory existing using the 'cleaning-esx3' service console command. If you like not vSphere 4.0 performance for some reasons, you can restore to the State ESX 3.x as well by using the command line "rollback-to-esx3' which will reconfigure your bootloader then you can manually delete the service console vmdk file.

    I would start by looking at the guide to documentation how do more efficiently with planning in advance and prepare here http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esxi40_i_vc40.html

    Steps to follow:

    1 back up your database

    2 download the license file and the upgrade to vCenter 4.0 Server and components, point to existing ODBC connection to keep data of perf or clean install.

    3. switch to level the esx host using component VUM

    4. upgrade tools vmware and vmware hardware at level 7

    There is a video online of 4 steps casting presented by VMware its pretty good and solid foundation.

    Good luck!

    If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

    Kind regards

    Stefan Nguyen

    VMware vExpert 2009

    iGeek Systems Inc.

    VMware, Citrix, Microsoft Consultant

  • spinning cursor, stands, front, upgrade to El Capitan, upgrade to internet high speed and added SSDS but no change

    I just wheel spinning, lasted about 30 seconds.  Frequently, before and after the upgrade.  Add a SSD and increases internet speed from 10 to 25 - no visible change in the stalemate.  At the end of the present statement said that it has been updated about an hour ago.

    Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  • Just upgraded to 42.0 Firefox and background color setting doesn't work anymore - an empty window is always white.

    I just upgraded to Firefox 42.0 and, unlike previous versions, the setting of background color in 'Content' no longer works. In the settings page, the indicator 'Background colour' changes the color I choose (not white) in the choice of color theme, but each time I open an empty window background color is always white. Then, when I return to the Setup page to verify that the indicator still shows the color that I chose. And I have check the box 'Use the system color' or not there are tick, the result remains the same: the background color of an empty window is always white.

    It is a problem I've never met before. I would like to know why.

    Thanks for any help.

    You can make only one rule:

    @-moz-document url(about:blank), url(about:newtab){ html,body {background-color: #ccc !important } }

  • I just upgraded to FireFox 22.0, and now I get a Javascript error (error: illegal operation on the prototype of a WrappedNative object). What can I do?

    I just upgraded to FireFox 22.0 and am now a bunch of Javascript error windows when I try to sue for Gmail. The error message is: error: illegal operation on the object prototype WrappedNative

    'Disable your modules and add one by one (each requiring a reboot). If you have some sort of add-on downloader, this can be in conflict with your java/web browser. Hope this helps.'

  • I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    Question
    I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    To open the window to customize the toolbar, do one of the following:

    • Firefox button > Options > toolbars
    • Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
    • Hold DOWN the ALT key while pressing the VTC keyboard letters

    See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

    Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.

    • CTRL + T will open a new tab

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

    I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

    You can only change the update channel if you uninstall Firefox and remove the Firefox program folder or install a beta version or release that copies a file new channel - prefs.js. Update Firefox never changes the update channel. Only a full installation will do it.

Maybe you are looking for