Upgrading to Windows 7: compatibility of the device data could not be loaded

Similar Questions

• Cannot start Windows Mail because "file MSOE. DLL could not be loaded. " System files corrupted...

  I have problems starting Windows Mail because «file MSOE.» DLL could not be loaded. " I ran the SFC function, and after checking my file system, he said there was some corrupted files, and some of them could not be fixed.

  Any suggestions on what I might try next?

  Thanks in advance for your help.

  Hello

  Make sure that Windows Mail is not running - check the Task Manager - right click on taskbar - task manager

  Download WMUtil - SAVE - DECOMPRESS go to where you put - it - right click RUN AS ADMIN

  http://www.oehelp.com/WMUtil/

  Check #3 and WinMail commentary by the author of WMUtil
  http://www.oehelp.com/OETips.aspx#3

  More expert here:

  Discussions in microsoft.public.windows.vista.mail
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.mail&cat=en_us_fdf138d6-427A-48D6-84dc-a91a6c9fbb45&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I click on file--> information about the file, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."?

  When I click on FILE-> FILE INFO in Photoshop, I get this msg "Cannot complete the File Info command because the metadata library could not be loaded."  He works in bridge, but not in Photoshop.  Used to work in Photoshop, I think that before the last update.  What gives?

  FINALLY, there is a new update to Photoshop.  I downloaded it, and the problem is solved!

• C:\windows\system32\nvcpl.dll the specified module could not be found at the beginning upward

  Original title: starts: error

  At the start of the get dialog box a big X 32\NvCpl.dLL C:\WINDOWS\System loading error RUNDLL

  The specified module could not be found.

  What this mean and how can it be fixed

  Yahneev

  Hello

  The system was recently infected by malware?

  C:\windows\system32\nvcpl.dll is NVidea graphics driver

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Open the Device Manager and uninstall the NVidea graphics driver

  Reboot and Windows will reload the driver

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Windows Defender error 126: the specified module could not be found

  How to fix Windows Defender on Windows 7?

  For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

  "Error 126: the specified module could not be found.

  However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

  I'm really looking for a way to get Windows Defender to rework.

  First of all, it's what I already know and what I don't want:

  • I don't want to disable Windows defender, I want to make it work again
  • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
  • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
  • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
  • I do not have MSE installed, tried to install it, haven't changed a thing

  Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

  Kind regards

  Florian

  I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

  Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

  ServiceDll property have been replaced in the registry of
   
  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
  20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
  00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  TO

  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
  6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
  00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

• "Reinstall windows xp home edition__\i386\biosinfo.inf could not be loaded."

  OP: reinstall windows xp home edition

  I am trying to Setup. I changed the BIOS to read the CD of resettlement (never been used). I pressed F2 when starting and then "press any key to boot from the CD-ROM. I'm sure I did it correctly, as I did a Windows XP reinstall on another computer before with no problems.

  Anyway, then I get this message:

  File \i386\biosinfo.inf could not be loaded. The error code is 47872. Setup cannot continue. Press any key to exit.

  What is the problem and how do I get to the installation?

  see if it will let you enter the recovery console, This will tell you how (option 2)
  When you get the recovery console, type 'copy c:\WINDOWS\ServicePackFiles\i386\biosinfo.inf c:\WINDOWS\inf' without the qoutes. There should be a space between the copy and the c: and the first destination (at the end of the inf of the first part) and the second (just before the c: of the second) another one, all this should be no space. If that doesn't take care of the problem, then heres how do the installation of repair you asked
  http://www.michaelstevenstech.com/XPrepairinstall.htm http://support.Microsoft.com/kb/315341       

• Error RUNDLL c:\windows\system32\nvmctray.dll the specified module could not be found. .

  This message came only when a user connects.  I was not able to find any assistance to this problem anywhere.

  This file is linked to your nVidia video card.  You can do one of three things:

  1. go to nVidia, download the driver for your card (look in the Device Manager (start > run > devmgmt.msc > OK) for the model) and install the latest driver.

  2. right click on an empty space on your desktop, choose Properties and then go to settings > advanced and find the place to disable the tray icon (you'll really have to have anyway).

  3. download Autoruns, install it and let it complete the scan, click the 'Connect' tab and look in the right column for the entry that includes c:\windows\system32\nvmctray.dll, uncheck the box at the left end of the line and restart.  If you can't find it in the 'Connection' tab, select the "all" tab and use the search on the file menu.

• Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

  Whenever I start my computer, a message appears:

  "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

  Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
  If anyone can help with a solution to my computer problem?

  Hi Caspwilson,

  Not answering all calls for support!

  Download CCleaner from www.piriform.com/ccleaner and scan your system.

  I hope this helps.

• The specified package was rejected by the device and can not be loaded

  Hello

  I develop an application, it works very well on my Simulator... but when I try to run it on the device, it gives me error

  "The specified module was rejected by the device and cannot be loaded"

  I use Blackberry JDE 5.0. Can you help me please? its really urgent.

  Thank you

  Gunjan

  I guess that the storm is running OS 4.7. In this case, you need to compile the application in any JDE<=4.7 .="" there="" is="" a="" general="" rule="" that="" the="" jde="" version="" should="" be="" less="" than="" or="" equal="" to="" the="" os="">

• An https site, I've used for years suddenly is therefore more accessible "because the authenticity of the received data could not be verified."

  It works on Furefox on Windows7 Pro and Internet Explorer but not on Windows 7 Home Edition and not on my Android phone. Any ideas how to get around this?

  In another thread, you indicated that the site is https://teradatanet.teradata.com/

  This site uses TLS 1.0, an older version of the standard SSL that Firefox 37 deals is also safer. It is a change of 36 of Firefox.

  You can make a specific exception to the site for the server for Firefox problem allows TLS 1.0 - it's for Windows, I have not tested on Android:

  Here's how:

  (1) copy the hostname of the server address. It is the part between the https:// Protocol and the next / character and not including one of the people. In this case: teradatanet.teradata. com

  (2) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (3) in the search above the list box, type or paste tls and make a pause so that the list is filtered

  (4) double click on the preference security.tls.insecure_fallback_hosts to display a box where you can paste the copied hostname. If you have something here already, add a comma at the end before sticking to separate the new host name the previous names. Then click OK to save the change.

  When you reload this site, Firefox 37 now redirects to a second server (note extra 0 in the host name):

  https://teradatanet0.teradata. com/Site0083/oam/UI/Login? GoTo https://teradatanet.teradata. = com/c/Portal/login

  Then repeat steps 1 and 4 with additional host name (in step 4, add the second host name after a comma, do not delete the first).

  Now when you reload, it should work as Firefox 36. Instead of a grey padlock, you should see the gray triangle exclamation warning icon, which indicates a problem with the connection. In this case, the problem is that the server uses an algorithm of RC4 encryption, including 36 of Firefox and most consider as non-secure/hackable.

• I have this RunDLL error. There was a problem starting O:\Windows\system32\sshnas.dll the specified module could not be found.

  I don't see any change, but it's annoying.

  This file is a Trojan horse. The Trojan horse is set to run at startup but the file is missing now and that's why you get the error. You have removed the malware, or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan with your antivirus with updated definitions and a good software like MalwareBytes antimalware program ' Antimalware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Once you are sure that your computer is now clean, rest boot entry you can delete:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista/Win7 it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• A "monitor" program has been found running on your system - please unload the memory "." Second screen = The ProtectDisc DLL could not be loaded

  When I open the Web to date 6.0 the above error is coming. I can't update my Web site more.

  Who can help?

  Thank you

  Notenkraker20

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the Forums of Internet Explorer development.

  http://social.msdn.Microsoft.com/forums/en-us/category/iedevelopment

  It will be useful.

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

  If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

  Your question is also confusing: you get this error message every time that you do a reboot?

  You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.