Upload pictures on sd card pc and import for iPad

Similar Questions

• Help on graphics card memory and upgrade for iMac

  Hello!

  I need advice on a good new graphics card for iMac 27 inch end 2012. My work is mainly in animation, Visual effects and game development soon, so I need an additional card to increase my speed.

  Currently, I have a NVIDIA GeForce GTX 680MX 2048 MB card. Do you think I should stick to a similar card? Is there something new that will offer me better performance at an affordable cost?

  I don't have much money to spend, but I can certainly use additional graphics now.

  I have also 2 remaining memory locations that accepts DDR3 1600 MHz memory module, but it seems that this module is no longer available. If I had to choose between a graphics card and RAM, which should I go with?

  Finally, can I install these myself? I don't have any Apple Store around me and I do not trust the computer guys in my area.

  First of all, the iMacs are notoriously difficult to make something with except add RAM. Here is a good site where you can get some info on the dismantling, etc.:

  https://www.iFixit.com/

  Usually, graphics cards should be replaced with the same model/type of work (if any) - see above site for this kind of info. I'm quite sure that you cannot add just one - iMac is not designed for it.

  Regarding the RAM, just check out OWC for necessary RAM:

  https://eShop.MacSales.com/shop/memory/iMac/2012_27/DDR3L

  Check that your model is listed. I don't know where you would have been told that the RAM is no longer available (FWIW, Apple does not sell RAM and uses of third party RAM in the new Macs).

  I'd go with the RAM - how many do you have now? Adding RAM is easy.

• Desktop all-in-one HP 19-2113w: can I update the card graphics and ram for my all in one computer

  Y at - it an upgrade, I can do for this computer and if so where can I get the upgrade

  Maximum memory is 8 GB and there is no way to upgrade the video. Here is the Service Manual:

  http://h10032.www1.HP.com/CTG/manual/c04716104

  It's images, but quite easy to follow. Let us know if you need help.

  Photo of the motherboard:

  

  You can see it's pretty basic. No room to add a video card, I'm afraid. It uses memory DDR3-1333 phone like this:

  https://www.Amazon.com/Corsair-1333mhz-PC3-10666-204-pin-SODIMM/DP/B002YUF8ZG/ref=sr_1_6?ie=UTF8 & qid = 1469730684 & SR = 8-6 & Keywords = DDR3-1333 + SO-DIMM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to rotate a PDF to fill out and sign for ipad?

  I love the app and it works fine but I can find a way to rotate the documents I get upside.

  There is currently not a feature "rotation" fill & sign for the iPad is on the list of feature requests.  For now, you need to use another service to rotate the file, then the tool in the application of fill & sign.

  Thank you

  Josh

• Library and Viewer for Ipad Content Viewer

  Hello

  How to activate or add "Library" and "Viewer" in the Adobe Ipad content viewer.

  Thank you

  If you are talking about the highest navigation at the bottom of the screen with icons bar, this feature is available only for customers of the company. If you are a corporate customer, you can specify icons customized for this navigation bar in the generator of spectator.

• I can't upload pictures to Ebay, error Code ME 005, ME200 and 11011.

  I can't upload pictures to Ebay... and 11011 ME 005, ME200 error codes?

  Hi Annie Pete.

  A. what internet browser do you use?

  Have b. you been able to download the photos earlier?

  If you are using internet explorer, you try to install the flash player on your computer and check if you are able to upload photos.

  http://get.Adobe.com/flashplayer/

  http://answercenter.eBay.com/thread.jspa?threadID=900205006&mod=1255811792818

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  It's never happened before.

  I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  I've never had this happen before.  I use a MacBook Pro

  well, I understood my question, maybe the same thing for you...    The catalogue was somehow the problem, I created a new catalog and everything works well again.  I assumed that the catalog has been damaged during the import failed because the network connection.   hope that helps

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• Update of Lightroom CC November 2015: import format is back to normal, but after the first import, now it shows not all pictures on my card

  I * hated * the new import dialog box so actually have several cards which have just been collectible images in recent months.  I was so happy to hear that Adobe has put the old import returns with this version.  I've upgraded LR, jumped into one of my cards, was delighted to see the old format which shows me the destination directories and allows me to their collapse downwards, then uncheck the box.  Then I collapse all and select a date, choose metadata presets (location) and add keywords for this event and import.  Beautiful... so far now, in the next few days.  Or so I thought.

  I click Import the 2nd time, the card reader flashes for a bit, then stops - no image showing to import.  GMA

  -J' I doublecheck the setting of the "export map" - he did not review.  But I have reinstall the card anyway.  Nothing.

  -J' have check in Windows Explorer - Yes, a lot of ships there to import.

  -Well, maybe he thinks he imported, so I uncheck the "don't import suspected fooled no" (which used gray-just out them anyway)-nothing.

  -J' I quit and restart Lightroom.  Nothing.

  -J' I plug the card reader into a different USB port.  Nothing.

  Adobe WTF?  I have never seen this one before.  I'll reboot the PC right then, but thought I would ask if others see it too...

  Well, I'm distracted: my line "I have never seen anything like this before ' was BS.  6 months ago I * fact * see the solution and it was to switch the triangle next to folders to destination according to another thread.  Fortunately, just after the announcement, some screen I went to in the forums showed me my past behaviour, and there was the answer.  This bug is apparently still there - if your images to import will not be displayed, try clicking on the Panel of the destination folder on the right side of the dialog box and they'll pop right back in - they have just made for me.  I wish you to understand why this is happening and why they have not fixed.

• 10 windows and importation of the card does not

  I used to put my SD card into my card reader and she start LR and then show the importing the Photos screen.

  I have upgraded to Windows 10, but now when I put my SD card in the card reader, nothing happens.

  The automatic run settings says "Use Adobe Lightroom" when the card is inserted, but not auto-play, somehow.

  I tried to reset import to default Windows 10 Autoplay menu and then put the card back in the drive, but he affecting LR still does not, have the program - nothing happens.

  Any correction that all the world knows, it would be great if you can enlighten me!

  Kind regards.

  Paul.

  HI Jim.

  Just found out that at a certain stage, in the preferences of LR, that the 'see the import dialog when a memory card is detected' checkbox, became not controlled. I have myself as a far as I know, so I guess he did it in an update to Win 10 or via CC LR programm updates.

  Check that box and now everything is fine.

  Thank you for taking the time to look at my question.

  Paul.

• Hello, I downloaded 7 Adobe photoshop elements and I have trouble downloading pictures to a card reader

  Hello, I downloaded Adobe photoshop elements 7 and I'm having trouble to download new pictures from a card reader. Any suggestonS?

  When try to download, player, this message appears - unable to get thumbnails of the device. The device is not connected or is busy. Unable to get the pictures from the camera. The device is not connected or is busy

• I want to take pictures of an explosion and import it into my project of cartoon flash so that the

  I want to take pictures of an explosion and import it into my project of cartoon flash so that the explosion has more black background. This way I have a real no cartoon explosion to the search in the video with my designs. Is this possible? If yes how?

  Flash Pro cs6

  Mac: Processor 3,4 GHz Intel Core i7

  Memory: 8 GB at 1333 MHz DDR3

  convert animation to gif or png sequence (if it isn't already) and import them into flash.  use edit > trace > trace bitmap image to convert bitmaps into vectors and withdraw the funds.

  or use a video editor to remove bottom of the video.  Rotoscoping with sequels would be a good choice.

• How to import pictures from my camera without re-import the olf ones

  When I try to import my new pic to my pic

  When I try to import my new pic to my pic

  =====================================
  I'm starting to think the identification of previously
  uploaded photos begins to falter when a high number
  photos are still on the memory card. May be a good
  idea to archive the photos elsewhere and less save
  pictures of the card.

  Here is a way to download the photos of choice...

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / computer... it can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

• What type of SIM card should I buy for taking pictures with ZTEOPEN?

  Never used photo with ZTEOPEN purchased 10/2013 option. Another thing I need to take pictures and upload them?

  The SIM card is only used for the mobile network.

  To store your photos, you can use the internal memory, but it is not recommended because of the constraint of storage.

  You should consider the purchase of a MicroSD card.
  If you want only to take pictures with your phone, then you can buy a relatively small MicroSD card, 8 GB will give you plenty of room.

• How can I detach sweeping lightroom and import photo?

  When I scan to my computer that he was ready to go to my documents, it now goes to Lightroom.  When I try to open it in my documents there is a link to lightroom and sending me lightoom.  the same thing happens with photos I take and import from my card.  they are not a proper jpeg they have a lightroom icon and no matter what I do by clicking on the picture takes me to lightroom opens. Help

  Something is wrong with the associations of files on your computer. Lightroom is not designed to be an application that starts when the image files are open. It was apparently a gap that existed at one time but supposedly has been eliminated. Check your file associations and delete Lightroom as the application associated with image files.