Uprgarding NB550D (Module 3 G, memory)

Similar Questions

• Second disk modules and hard memory for Dell Inspiron 580

  We have a Dell Inspiron 580, which we try to use once more (been using a Tablet).  I would like to know if the following can be used for this computer - especially the memory modules since we receive messages to have "insufficient memory".  I can't remember where we got these parts (believe memory modules came from Dell).

   

  Hard drive: Western Electric WD400 [WD P/N: WD400BB-32CLB0]

   

  Memory modules: SNPJ0202C/512 - I have four of these modules

   

  These items (above) can be used with the Dell Inspiron 580?

   

  SilkPony

  None of the parties you posted are compatible with the Inspiron 580

  The hard drive is IDE/EIDE, which is not supported by the 580. The 580 only supports SATA drives.

  The memory is DDR which is not supported by the 580, which supports only DDR3 memory.

  Bev.

• Which memory module has Qosmio F20-136?

  I want to buy another module of 512 k memory Kingston does anyone know if the laptop doesn't have that one module 256 k 512 k initially installed and not two. Mines wrapped for Christmas so I can't open it again!

  Thank you

  Hello

  Unfortunately I don't have any specific information, but I am 99.9% certain that this unit is equipped with a single module of RAM and you can use a second with 512 MB or even 1 GB module. The memory modules compatible Ram for your device are:

  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Good bye

• Housing location on A60 Equium memory module?

  Hi there, I was just wondering, I have an equium A60 and need to know where the crack is to the memory modules inside the laptop?

  Can someone help me with this one?

  Hello

  I agree with Willow. Your device has 256 MB of internal memory. Upgrading memory, there is just a slot available. According to the specification your device can handle with max 1280 MB and you can use the other additional 1 GB module to use memory maximum memory compatible Module are
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Pavilion TouchSmart Sleekbook 15-b195sa - how to add a memory Module?

  I just bought a Pavilion TouchSmart 15-b195sa and an additional memory of 4 GB module so that it can bring to 8GBRAM - on order directly from HP.  I was expecting there to be a module cover removable memory on the underside of the laptop - it does not exist.  How to install additional memory?

  I looked on the HP site but no use, it leads me to a page that shows a removable cover...

  Adding memory to a sleekbook that is as thin as your new is a bit much for the average homeowner to laptop.

  The details in the image coming from the maintenance & service guide for the Pavilion TouchSmart Sleekbook 15.

  

• Problem upgrade memory on Satellite M40-142

  Hi all

  I am trying to upgrade my M40 - 142 (win XP) with 2x1GB memory modules. the initial memory is a single unit of 512 MB. When I remove and replace with 2 new modules of the system starts.
  If I leave the original memory in the slot and add only a single module 1 GB system startup and total ram 1.5 GB.
  If I use a single module of the new memories, the system is not to start again.

  I tried to update the bios to the latest version but when I run the .exe is an error and I am not able to run it.

  looking at the specifications of the motherboard should support the upgrade of memory 2x1GB.

  Thanks for your help

  Marco

  I guess you used the memory modules live all simply not compatible.

  The laptop s RAM can be certainly upgraded up to 2 GB of RAM (2 x 1 GB), but you must use simply compatible and God quality modules.

  Cheap may be not compatible or defective.

• Tecra M9 - does not start after memory upgrade from 1 GB to 3 GB

  I am trying to upgrade my M9 memory with little success. I bought a 2 GB module which is the same existing brand and spec to the 1 GB module, but the PC will not start no matter what options I try. So far I have tried:

  * Addition of 2 GB for the accommodation of extension from below (3 GB total)
  * Withdrawal of module 1 GB under the keyboard and its replacement by the 2 GB module

  None of these options work. The PC gives no beeps or indications that there is a problem, the led lights on the way to the top, the drive led flashes and then it goes into a wait state. Nothing happens.

  For the record, I bought initially upgraded memory that wasn't an exact match and I am now on my 3rd module suspecting a memory compatibility to be the issue. This current 2 GB module seems to fully match the 1 GB as well as being twice the size. It is:

  HYNIX 2GB 2Rx8 PC2 - 5300 s-555-12

  I am running Windows XP SP3

  The TECRA is a PTM91A Intel Duo T700 CPU 1.80 GHz

  Any help would be appreciated

  Hello

  To me it sounds like the new memory module is not functional or not compatible with the laptop. Otherwise the cell would start without any problem.

  If you bought the memory module in a store, you have to take it back and ask for a replacement.

  I n t have experience with Hynix memory modules. For the upgrade of my laptop, I used Kingston memory and it worked without any problem

• A40: What is the name of the memory?

  Hi I recently got a laptop sat pro a40.
  It shows 240 RAM and I want to add more memory to speed up the game of lineage 2. Question is what is the name of the memory, I need it please?
  love Kate xxx

  Hello

  You need a module of DDR memory like this:
  http://www.systemsassurance.co.UK/default.asp?shopID=systemsRelated.asp&PN=PA3313U-1M1G

  Good bye

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Satellite R630-141, memory compatibility

  I recently purchased Satellite R630-141 laptop and I want to improve it with memory of 4 GB, 6 GB of memory.
  -Do I need to buy originals from Toshiba?
  -Modules of memory are recommended? On web compatible Options, he has enumerated memory module - 4 GB memory PC3 DDR3 (1066 MHz) (PC3-8500) - do I have to take into account any other data when purchasing additional memory?
  -Is it possible to install 4 GB 1333 MHz CL7 side of the original memory module 2GB 1066 MHz CL7?

  Kind regards
  Swear

  It does not need a RAM Toshiba but better to use Rams from Toshiba as Toshiba offer tested high quality modules.
  4 GB of RAM spent number PA3677U-1M4G.

  I also recommend you to buy Kingston RAM. For more information visit the page of Kingston. It's a computer laptop with the same motherboard. Simply choose compatible Rams information.

• Upgrade memory satellite 1900-303.

  Hi, I just bought 1 GB of memory (2 modules of 512 MB) to upgrade my 1900-303. However, when I opened upward, first of all I don't see the memory modules and second memory does not. According to the manual, it will take 144 pin sodimm pc133 modules. That's what I bought.

  Anyone upgraded the memory on their 1900-303 and if yes what memory did you use?

  Thank you.

  Hello
  I m a bit confused about your manual!

  I ve contributed to my colleague that the upgrade of its Satellite 1900 305.

  This machine has PC2100 DDR - RAM and the laptop can handle the maximum of 768 MB memory!
  And there is only one expandable slot at the bottom of the machine.

  I Don t think the Satellite-303 and -305 are different in the memory usage. So you'd better try exchanging your memory modules first.

  Good bye

• Does not start after change of memory.

  Laptop HP dv6 - 2173cl

  Win7-64 bit

  I thought I had an easy task at hand... change my 2x2gb = 4 GB memory for 2 x 4 GB = 8 GB of memory.

  Removed old - replaced by the new.  Old and new are pc3-10600 (1333).

  When I got to the top of the laptop I had a screen with two options: enter the Startup Repair... or... start Windows normally.  I chose "repair startup'... only to be recycled to the screen option even.  Choose "Start Windows" gives me an error message and then sends me down to the option screen.

  I went into the bios... it shows memory 8132.  I did a test of memory in the bios and it says everything is ok.  Now, I run a test of marketing... and it's an hour in a check for two hours.

  I'm guessing that my new memory fights Win7... but I don't know why.

  Will be this "hard reset" I read about the work?  I can give up the test at startup?  Is there a downside for the hard reset?

  Help please.

  I found my answer over the weekend.

  Apparently there are modules of different memory... beyond the difference in office / laptop and 1600 Mhz / 1333 Mhz 2 Gb / 4 Gb... I had all these correct.  I found there are "not so high density ' and 'high density' chipsets chipsets.

  In the discussion of the chatbox says the seller of memory, "some systems will not use the high density of the smart parts J."

  I have the new shipping modules.  If the adventure continues I'll post more.

• Satellite A100-014 can't module of RAM PC2-4200 or PC2-4300

  Hello guys and girls,

  I have two modules of RAM memory installed on my toshiba a100-014. They are the two PC2-4200. However, CPU - Z which is a small software that helps out to discover what are the specifications of the hardware on your computer, says I have two PC2-4300. Isn't it funny?

  Why you think that CPU - Z does not recognize the RAM modules I have installed? Moreover, the machine works perfectly!

  Hello

  This software is not for me. I use Everest professional. It s also a hardware diagnostic application.
  But you the modules of RAM. Satellite A100-014 has been delivered with a module of 1 GB DDR2-533 (PA3411U-2M1G) and it s definitely a PC2-4300

• Question on the addition of memory to Satellite A40

  Hi people, have 40 I want to upgrade the memory to 256 to 1024. 2 questions,

  1. where is stuck memory? Toshiba say under the lower panel (rear of) fan, I looked here and there are 3 copper pipes it... which I won't remove the chance.

  2 (assuming I can find the memory slots) which is best modules of 2 X 512 or 1 X 1024 Module?

  Grateful for any help.

  Hello

  This computer is fitted with modules supports memory of towing under the keyboard.
  You can increase the amount of RAM by installing an extra memory modules as

  PC2100 512 MB (PA3164U - 1 M 51)
  PC2100 1 GB (PA3278U-1M1G)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  I would have preferred a 1 GB module
  To install memory, the laptop should be stopped and all the cables and battery should be removed.
  Insert your fingernail or a thin object under the edge of the brace of keyboard and lift the brace. Remove the two screws fixing the keyboard and a screws of the metal structure.
  Then, you will be able to remove the keyboard.
  But be careful.
  The full description will be published in the user's manual in Chapter 8 under memory

• Equium U400-145 memory problems

  Hi, I have the laptop above and I had used it for a long time with 3 GB of memory.

  The system has two locations and in the bottom, I had 1 GB and above, I got 2GB. The system came with 2 x 1 GB and I have kept a module provided and added a new bought Toshiba 2 GB module. The memory is PA3513S-1M2G
  2 GB memory PC2 DDR2 (667 MHz).

  I have just updated to Windows 7. Before I was constantly this that I swapped the two modules autour system crashed when loading, with a screen blue with the Windows startup screen, saying there was a problem with my computer and he was going to shut down to avoid damage. He said I check any recently installed hardware.

  If I have Exchange modules around again, it works great, even on Windows 7, 64-bit.

  I updated the BIOS to ver 4.00 but the same happens.

  I recently bought another 2 GB module to keep the system up to 4 GB, but I have determined that the system will keep crash at startup if:
  -the lower slot has 2 GB with the upper part with 2 GB
  -the top slot has 2 GB and below is empty
  -the bottom has 2 GB and higher has 1 GB

  If the bottom has 2 GB it works, just as superior with 2 GB and 1 GB lower!

  There is clearly something wrong with the ability of the system to deal with memory. [Another poster | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=154992𥵰] asked on memory max capacity of this system and its investigation was * bad * responded indicating that this system may have only 2 GB. * This is completely false * as I've used it with 3 GB without problem for 1 year.

  If anyone can help I would be extremely grateful.

  Concerning

  Lucius

  Hello

  Equium U400-145 has been equipped with Mobile Intel® GL960
  Express Chipset. Is this good?

  Here are some features of this chipset:
  http://www.Intel.com/products/Notebook/chipsets/GL960/GL960-overview.htm

  As you can see the chipset handles the 533 Mhz max modules, so you can use 667 Mhz, but the modules will run at 533 Mhz ONLY

  Here you can find the chipset specifications:
  http://www.Intel.com/assets/PDF/datasheet/316273.PDF

  Point 1.3:
  There you can clearly find the info that chipset supports 2 GB RAM max and modules are limited to DDR2 533 Mhz!

  Maybe you were able to use the 3 GB of RAM but the chipset has a limitation, and usually the most memory RAM is not supported.