UPS: turn off at Mac Pro every night
I just bought a new power supply (UPS) uninterrupted and it comes with the option to transform the every night to save energy (after I stop the desk top Mac Pro).
I searched the internet and Apple support communities and apparently there is no big advantage or disadvantage to stop the Mac Pro every night. It does not harm the desk top, it allows to save some energy, and it makes it safe from hackers while I'm asleep.
I can't find anything that tells me if there is a problem with completely set turned off power every night well. Anyone know of any reason not to use "SHUT DOWN" and then turn off the UPS? I guess the only difference it makes to the desk top Mac Pro is that it uses a battery to keep the current date and time.
An overview of everything that will keep my Mac Pro (mid 2010) humming is greatly appreciated.
It uses the battery to keep the current date and time.
... and to remember some system settings that must be available at the beginning of the start-up procedure, such as "where is the boot drive.
If your Mac does not start, the battery is a Lithium long term non-powered cells of room behind the graphics card slot. It should measure about 3 Volts in your hand to be useful. BR2032 is what apple installed, CR2032 will work in a pinch. They are used in the door openers garage and car-door-keys.
Tags: Mac
Similar Questions
-
Is it safe turn off an officejet pro 8500 a when not in service.
Is it safe turn off an officejet pro 8500 a when not in service. The electricity in my area off two or three times a day and every time that happens the printer begins once again reset. I'm afraid that whenever it cleans the printer heads is a waste of ink.
Hi fernan215,
Yes, turn off your printer when not in use. A fluctuation of current or failure can cause more damage to your printer when it is still on. You are also right that the printer is cleaning the heads and align the cartridges every time it is turned on. This is to ensure stability, good maintenance and calibration of your inks for the best output every time.
-
Photoshop elements editor 14 was working fine, all of a sudden it does not, even if I turn off my mac. Why?
Today I got the help of Adobe's Support team, and it was excellent. Everything works perfectly now. Thanks, John for trying to help anyway.
CONCERNING
-
My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.
If you have not yet installed any Adobe application, try step below and check.
Step 1
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )~/Library
It will open the folder of the user's library.
(3) then navigate to Application Support > Adobe.
Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.
Step 2
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return './ Library
It will open the folder System Library.
(3) then navigate to Application Support > Adobe.
Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
Step 3)
Basket of Adobe Application Manager of Applications > utilities.
Step 4) [same step again]
Click on the link below and download Adobe Application Manager and install the same:
http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg
Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.
Once the update is complete.
Restart the computer once and try to install CS 6.
-
In any case of Smartphones from blackBerry to turn off Email alerts during the night?
I am looking for a way to disable e-mail alerts in the night. I don't want just the sound to wake me up. I know that I can get my volume manually every night on phone calls only, but I was wondering if there was a way to do this automatically?
I don't want auto on / off my phone either because there is the only phone I use in my house. You never know if there's an emergency at 02:00 and someone needs to call you.
Thanks for your suggestions!
or enter the clock mode and options, select "switch to night mode.
I use this and not ring or email notifications until I ' out bedsidemode:.. "
Hope this helps
-
Stay of connector on cable network after having turned off the Satellite Pro A120
Hello
The green light from the connector of the network cable to the back of the laptop turned on when the laptop is turned off (no cable is connected).
It doesn't matter if it's on battery or power. And when it is turned on, the light goes out.Any idea?
Thank you
KAV
Hello!
Is in the BIOS wake up on LAN enabled? Try turning it off.
In addition an update of the BIOS if you n t to have the latest version.
Good bye
-
Hello all, I use cRIO 9025 and NI 9481 to develop a program. The relay is used as switches. I designed it, is that when I run the vi, the channels of the relay are all on. When the port of entry of the digital input/output module gives a signal to the relay, the relay channels is disabled. However, whenever I run the vi, the relay is disabled once and then trund once again. May I ask why is this happenning? I guess that's because the default state of the relay is disabled. Is there a way to fix this?
Thank you very much!!
All the relay modules are like that and there is nothing that can be done as far as I know. Electromagnetic relay are generally loaded spring and holding (switch closed) by a voltage sent to the relay. They will turn off when restart you on the relay controls. You can set the State of the relay on real as the first thing when you start your VI, but beyond that you would have to solve your electrical problem, control switching relay at a constant voltage during the startup of the program. However, in most cases it would be risky and unreliable. However, there are many different types of relay and you did not specify that you are using.
See basic operation section, section of this article to read on how to relay themselves by default to the State of open circuit:
-
Thanks for any help.
No reason at all. The batteries for several weeks. When not in use they really are doing that noticeablely. I just keep an eye on the charge is left every now and then and then just leave plugged in overnight to recharge before unplugging it again for the next few weeks.
Neil
-
I also have one copy of Dreamweaver CS5.5, which works very well.
Reinstall the software properly, do not use the backup / migration / Time Machine.
Download Acrobat products | 9, 8
Mylenium
-
Mac Pro 2013 randomly restart problem
Hello
Here's my problem: I have a Mac Pro end of 2013 (6 cores, 16 GB ram, over-pants D500, running OS X 10.10.5 with a WACOM Cintiq 21 - UX as my view only) who has, for the last month or so been randomly restart itself.
There are some days where it might be three or four times and then days where it won't do it at all. Also there are moments where it works well for hours, but then if I turned off the Mac Pro, it will crash and restart. Sometimes it will freeze momentarily application-wise (but the cursor moves but does nothing) before it restarts but usually just the screen goes black and then it restarts without any warning. I still get the black screen with the «your computer has restarted...» Press any key' and of course, it generates a crash report that I submit to Apple every time (that I'll post more recent one below as well.) I did start secure upward, reset the PRAM, booted single-user, just that I found online to do which is recommended. But nothing seems to have done something to help.
The Cintiq is connected through a DVI adapter to Thunderbolt. I also have Mercury Elite Dual Pro Rack hung RAID normally via Thunderbolt. There are times when I think that there is a problem with the RAID box and the Mac Pro but not sure. As there is a problem with the Thundebolt ports. I tried to pass the cables autour, but it has not seemed to have made all the difference. This also has all seems to have coincided with the last update of OS X where I've also updated the driver for WACOM Cintiq (I since past to the old driver). Is this all just a matter of software conflict?
I found an Apple Support thread where someone has indicated that a Kernel Panic may cause this, but then it also seems similar to what I've found, that was the issue with the Macbook Pro, which had problems with graphics a bit backward.
In any case, here's a crash report if it helps and thank you for any help that anyone can send my way!
Thu Aug 18 02:40:39 2016
Panic report *.
panic (cpu 0 0xffffff7f918c0b32 appellant): "ACPI \"PWRD\ "with zero power failure: < rdar://problem/15746463 > ' @/ SourceCache/AppleGraphicsControl/AppleGraphicsContr ol-3.10.25/src/AppleMGPUPowerControl/kext/AMPCPowerManagement.cpp:512»»»
Backtrace (CPU 0), frame: return address
0xffffff81fe9dbda0: 0xffffff800f52ae01
0xffffff81fe9dbe20: 0xffffff7f918c0b32
0xffffff81fe9dbe70: 0xffffff7f918c0020
0xffffff81fe9dbec0: 0xffffff7f918be7ad
0xffffff81fe9dbf10: 0xffffff7f918bed14
0xffffff81fe9dbf40: 0xffffff800fad394d
0xffffff81fe9dbf80: 0xffffff800fad3b48
0xffffff81fe9dbfb0: 0xffffff800f611867
Extensions of core in backtrace:
com.apple.driver.AppleMGPUPowerControl (3.10.25) [90 B 87953-018 b - 32E9 - AD83-0526D8E C4749]@0xffffff7f918b8000-> 0xffffff7f918c4fff]
dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f918b0000
dependency: com.apple.iokit.IOPCIFamily (2.9) [CA598036-E22A-3AAE-ABB0-9407B560C5C1] @ 7f8fd24000 0xffffff
dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f918b5000
dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f905d0000
dependency: ffff7f906b2000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]
dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8fdfe000
Corresponding to the current thread BSD process name: kernel_task
Mac OS version:
14F1909
Kernel version:
14.5.0 Darwin kernel version: Thu Jun 16 19:58:21 PDT 2016; root:XNU-2782.50.4~1/RELEASE_X86_64
Kernel UUID: D11F499F-5895-3D58-9101-5671A93D526D
Slide kernel: 0x000000000f200000
Text of core base: 0xffffff800f400000
Text __HIB base: 0xffffff800f300000
Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)
Availability of the system in nanoseconds: 9763446529233
last load kext to 4247477026004: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000 size 20480)
Finally unloaded kext to 4307635021147: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000, size 16384)
kexts responsible:
com.kairos.driver.DuetDisplay 1
com.apple.driver.AppleRAID 4.0.6
com Apple.filesystems.autofs 3.0
com.apple.iokit.SCSITaskUserClient 3.7.5
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 110.19.6
com.apple.driver.ApplePlatformEnabler 2.2.0d4
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.iokit.IOBluetoothSerialManager 4.3.6f3
com.apple.driver.AppleHDA 272.18.3
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.12
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.kext.AMDFramebuffer 1.3.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX4000 1.3.2
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
3.10.25 com.apple.driver.AppleMGPUPowerControl
com.apple.driver.AppleLPC 1.7.3
com.apple.kext.AMD7000Controller 1.3.2
com.apple.driver.AppleIntelMCEReporter 107
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 36
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 705.4.2
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4360 930.37.3
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com Apple.NKE.applicationfirewall 161
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com Apple.kext.Triggers 1.0
com.apple.driver.AppleUSBHIDMouse 185,3
com.apple.driver.AppleHIDMouse 185,3
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5
com.apple.iokit.IOUSBMassStorageClass 3.7.2
com.apple.driver.AppleUSBHIDKeyboard 176,2
com.apple.driver.AppleHIDKeyboard 176,2
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 272.18.3
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOSurface 97.4
com.apple.iokit.IOAcceleratorFamily2 156,17
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3
com.apple.iokit.IOBluetoothFamily 4.3.6f3
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 272.18.3
com.apple.iokit.IOHDAFamily 272.18.3
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
3.10.25 com.apple.driver.AppleGraphicsControl
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.kext.AMDSupport 1.3.2
3.10.25 com.apple.AppleGraphicsDeviceControl
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
3.1.7 com.apple.driver.AppleThunderboltNHI
com.apple.iokit.IOThunderboltFamily 4.2.2
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 730.60
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.driver.AppleEFIRuntime 2.0
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 398
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com Apple.KEC.corecrypto 1.0
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
It seems that you have a hardware problem with one or two of the GPU.
-Make an appointment at an Apple store Genius Bar.
Shop Apple Store - Genius Bar
https://www.Apple.com/retail/Geniusbar/
-
Is it better to turn off my computer at night or put in mode "sleep"?
This is my wife Dell, about 8 years old and using a router in my computer and it is windows XP
Thanks Steve. I asked the question because my wife has problems connecting to the internet in the morning after she stops every night. I'll take 3 or more attempts. His son tech-savy told him to stop, and I said to sleep as I do. In any case, thanks for your response.
Turn off your computer is a good idea, because it will give him some rest to run all day, cool off, etc..
When the computer comes on, it takes some time to connect to the internet, and according to what age has the computer it might take some time.
Just turn off the computer during the night and the morning market and leave for a few minutes while it loads everything, and when you come back it must be connected to the internet just fine.
Unless of course there is an underlying problem of the internet, in which case let us know and we can work on fixing it.
-
OfficeJet Pro 8620: WiFi will not turn off
Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac. Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.
Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro. Everything works fine now!
However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem. I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is. As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi. I've restored the "Default network" printer, but this is not the case.
According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there. How can I solve this?
Your WiFi is turned off. Your wireless Direct is not off. Disable wireless directly into the printer. Info is in the User Guide.
-
Airport Express do not work when the mac has been turned off
I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared.
Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?
Post a screenshot of the express installation of airport utility.
I plugged our mac mini and the Airport express separately to the internet via a network hub.
This seems odd... What is a network hub? They went to fashion 20 years ago. Do you mean a switch? Real model number please.
What model is the express?
Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?
Plug the Express directly on the main router... and implemented in Bridge mode and create a wireless network. That's the way it should be installed now... but this 'hub' could be a problem.
-
Turn off filtering by MAC address
Hi, I recently got WIFI for my house. I want to use wifi on my ipod touch but even when I add and connect to my network with the password. I can't use wifi and applications that require a connection. Most people say that I have to turn off my MAC address filter to make my ipod touch can access the internet. Thank you.
MAC address filtering is enabled or disabled in your wireless router. It is disabled by default and would be activated only if you have explicitly configured the router like this. See the user manual of your router for more information, or tell us the router brand and model number. Steve Winograd, Microsoft MVP (Windows desktop experience)
-
iPhone alarm will not turn off and between screen Hello.
IPhone of my mom 6 and my brother 6 iPhone have experienced a problem when they set an alarm. After setting the alarm, they noticed the screen defaults to the white screen Hello seen after that new updates have been installed and the alarm goes off. This happens every night, even if they are both set to update to the latest version of the iOS software. Any suggestions/advice?
Interesting.
Follow the 3R - if this does not solve your problem proceed
Troubleshooting of user is:
1.restart, that is, power off / on,.
2 reset http://support.apple.com/kb/HT1430,
3. restore the backup, restore as a new device. http://support.Apple.com/kb/HT1414
Maybe you are looking for
-
Screen quality has deteriorated suddenly
The next day my iPad screen Air quality has deteriorated. He has ghost images and has totally lost the high resolution that I expect my iPad. Looks like the old tv reports that allows us to get on the rabbit ear antennas! I did nothing else I know?
-
Can not love or hate YouTube videos?
Hello I can't seem to like or dislike the YouTube videos in Firefox. I tried Internet Explorer and it works fine. Is not that the buttons aren't there (which a lot of people seem to have problems with Googling), it's just when I click on them, they d
-
Having trouble getting an Excel file table
This will probably be a very stupid question, but I could hurt trying to get a table 2D from an Excel file? The file contains two columns of data that I want as a 2D array (or two tables 1 d) and after having tried a number of things I don't get anyt
-
Need help with the reading of an INI file.
Hi all I have some difficulty to read an INI file that I created. I managed to create an INI using Key.vi file to write so that I can possibly send the baud settings to my RS-232 port. What I have trouble is reading this INI file even I created. What
-
How to fix my USB device wireless of Linksys AE1000 of intruders in XP?
I am dumping Comcast because they have triggered my rate for internet so I thought I'll go wireless. PC - XP SP3, IE8. Bought a Linksys AE1000. Haven't opened the box yet. If I want to use it, I have a good signal on my Toshiba laptop. I can get a si