URGENT! Cannot start from the HP recovery discs.

Similar Questions

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• Portege M205-S810 - cannot start from the CD

  The hard drive on my Portege M205-S810 doctors went belly up recently and I replaced it for her.
  When she could not find the external CD drive provided with the machine, I bought what I thought, it was a CD/DVD external Toshiba.

  Readers of original equipment bit that I found online were ridiculously expensive.
  I found one on Ebay for $55. Should have known it was too good to be true.

  The key is that I can't start the recovery disc to load xp on the new drive.
  Is it possible to work around this problem, or am I just GROUND?
  Has anyone tried using a PCMCIA USB adapter card so that it can boot from a CD Universal USB?

  Thanks in advance for your help.

  A Novice

  Hello

  As far as I know not all external drives are bootable and you should use the compatible and supported a.

  As I m not wrong the drive USB2.0 SCD2-PA3352E and the PA3402E-1DV2, Rev.501 USB 2.0 DVD Super Multi drive are tested and works for sure!

  I think you can also use the Toshiba PX1054E-1NST Freecom drive with CardBus card, cable II.

  But I found also a very interesting topic here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232&

  The kjo user posted a nice instruction how to boot from a drive USB diskette or drive freecom pcmcia-cd/dvd

  Check this maybe useful for you s also

• Re: Satellite L310 - cannot start from the HARD disk

  Hello

  My L310 just died on me yesterday. My system just can not start, not even in Safe Mode. And it keeps trying to start using my network card, not through hard drive.

  I put the BIOS default settings, but it does not help.

  And she has this tone to loud continuous beep when it tries to start using the network card. A continuous beep, even on the screen of the BIOS and in safe mode.

  I chose the hard drive manually, but he keeps trying to start through the network adapter.

  And the laptop does not meet the keyboard. Even with a keyboard external usb. When I sometimes managed to boot my system on the rare occasion, I get to the login screen and cannot button my password.

  Does anyone have similar problems?

  Let me know. Thank you!

  Looks like your HARD drive is defective. BIOS recognize it?
  You should test the disk with Drive Fitness Test. Download the CD image, burn it to a CD and boot from it:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Check this box and give us feedback. Maybe the HARD drive needs to be replaced.

  On the keyboard issue it is not easy to say what are the causes of the problem, but in the worst case that he should be replaced also. :(

• Cannot start from the CD on Satellite L10

  Hi, I had several problems during the last two weeks with my Toshiba laptop. I decided to back up all my files and use the recovery disk to erase everything. I put in the disc and then changed the BIOS so that the CD/DVD drive was the first. (I hope, Toshiba L10 and "Utilities" CD series tools, is the right disc)

  It just loaded windows as normal and I can not seem to get the startup disk. If you have any advice for me please answer as soon as possible.

  Thanks in advance :) Ashley

  Hello

  You must find the Toshiba Recovery CD. On this CD, you will find the image completely with Windows and all Toshiba drivers and utilities.
  From this CD you must boot to install the new OS.

  Other CDs contain only the software, drivers and utilities you can find on the page of the Toshiba driver.

• Satelite C70-B-32D - cannot start from the CD

  Hello

  I can't boot from the CD. I changed the boot in the BIOS accordingly and always order boot from the HD. The CD is very good and starts fine on other PCs.

  In order to boot from sources other than the HARD drive, you must disable secure in the BIOS startup

• Cannot start from the CD HP Pavilion 15-n003sq

  Hello, I'm trying about three days why my laptop do not show me the CD option in the Boot Menu (F9).

  I need to reinstal my windows (8) and I don't really have the time to find a USB key (I don't have in any case..), so I have to do for the CD to start windows.

  I don't really understand why it doesn't, after all, it worked the first time when I instaled windows 8.

  I'm looking online for the solution, but I can not find the USB solution. This isn't a solution for me I need to install CD... What happens if I put in shape all-> them my disk partition (up to drive local C will remove a part of windows and it will colapse...) then will probably be to boot from the CD?

  Secure boot it is disabled in the BIOS (in any case, he let me to him allow for). Legacy Boot, I tried with her, turn on and off, I have not seen a chage.

  Thank you

  Radu

  Hello

  Is not important anymore. I don't know why, but it worked after all...

  I forgot the Windows CD in my laptop during the night and the next day when I open it, the laptop started direct with instalation windows - I don't know why because I did not do anything (I restardet and shut down the laptop before a lot and did not work)...

  Thanks in any case and thanks for the very quick response

  All good,

  Tavi

• Cannot start from the installation DVD after factory reset my Windows VIsta computer.

  Original title: PC crash will not restore

  My pc crashed this morning.  I tried restart did not work.  System Restore tried told me no restore points.  Then did restore it to the factory, formatted, then said it was full but the pc still does not start.  I am trying to recharge cost of Windows Vista, but the pc can't see the cd, dvd, or usb key, so I can not install.  How can I reload windows?

  Hello

  Remove all external devices such printer, USB drives and check if you are able to boot from the DVD. If this does not help, contact the OEM (Original Equipment Manufacturer).

• cannot start from the cd with dell gx1 optiplez

  I have power old gx1 and I can't boot from the cd bios does not boot priority and I just can't understand the configuration of the jumpers any help would be greatly appreciated

  
  

• NetBook - cannot start from the CD live Ubuntu 8.10

  Try to boot from Ubuntu 8.10 live CD on my Netbook NB100 to see if everything works before upgrading - starts OK but then after a few minutes I get just a screen rolling filled with dev sr0 and block numbers of the IO error.
  The CD starts OK on my Toshiba Satellite.

  Someone at - it ideas?

  Hello

  I'm not Linux expert but autour Googling, I found this discussion. Maybe it can somehow help you.

• Home CD not active - WinXP virtual system - cannot start from the CD to install WinXP

  I'm new to this product, although I used vmware customer a while back on a Windows System.

  I have a P4-24 base system. G Intel chipset with new CD/DVD IDE burners/readers.

  These are both on IDE1 and nothing is on IDE2

  I have two drives SATA WD120G who are the active disks.

  ESXi 3.5 installed OK and I can create a virtual machine using the VMware Infracstructure customer.

  When I start the client machine I have CD/DVD host will start the Windows XP CD, but it fails

  to do so. I tried the option to use the client CD started the power upward, but so far I can not install the WinXP operating system

  on the virtual machine. I even unplugged of the DVD to limit the scope, but that made no difference.

  It's almost as if the virtual machine cannot find the CD/DVD drive.

  Can someone suggest a resolution?

  

  I never use physical media (do not say that it does not work) - I use the ISO. I find in situations like yours is to mount the iso for the virtual machine outside the parameters of the virtual machine - simplest method, you will see an option to connect to cd/dvd in the menu in the VI client.

  Another thing - you will need to connect a flp buslogic image to a floppy drive so that the XP VM can see the buslogic controller (so you can see the hard drive) for installation of the operating system.

  http://virtrix.blogspot.com/2007/09/vmware-installing-windows-xp-on-esx.html - this link also has a buslogic.

  If you find that you don't have enough time to interact with the menu of the loader boot - set a delay at startup in the settings of the virtual machine to 5000ms - this will give you 5 seconds.

  I hope this helps.

• Reinstallation of the product recovery disc DLL file

  I recently reformatted my hard drive and reloaded Windows XP Home Pro on my M100 Satellite (PSMA0A) from the product recovery disc.

  Everything is OK except that I get an error 'Unauthorized repositioning of system DLL' whenever I start the computer?

  The exact error message reads;

  RTHDCPL. EXE, DLL unauthorized system

  "The user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place because the dll C:/WINDOWS/system32/HHCTRL. OCX occupied an address box reserved for windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.

  I contacted Toshiba who suggested I need to set up a new user account and then delete the original user account, and this should solve the problem.

  .... I did as suggested, although this has not solved the problem...

  Any suggestion please

  It will be nice if you can post the link.

• Could not load the product recovery disc

  Desperately need to use the product recovery disc but the disc will not load. My computer recognizes the drive but says "this disk or device contained more than one type of content, want you want windows to do" and then gives me the option to open with real player, Media Player, print, slide show or nothing. Why usually just charge it?

  I need the product to work recovery disk I my laptop turns itself of every minute or so. I get a blue screen that is visible for a split second, and then it restarts.

  I restored the system to a previous point, but nothing helped. My only option is to use the system restore.

  Can anyone help?

  Hello

  I'm not sure if I understand you doubt correct but must boot from the Toshiba recovery disc. I put t know what laptop you have exactly, but go to the start menu and select the CD/DVD drive to start. After that, follow the instructions on the screen.
  Check this box!

  If it doesn't work you should try to clean the lens of the drive. Therefore, you can use a microfibre cloth.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.