Urgent ideas if it rains?
Hi all
Got a little an urgent request for ideas for this weekend. Asked me to record and edit a DVD of wedding for friends and so far have had any experience with recording on Nice bright and sunny. I recently checked the weather forecast and it seems to be raining all day Saturday. All my ideas for the DVD presentation were swept away (excuse the pun) if I am limited to the inside.
Does anyone have any suggestions on what I could possibly do to replace interesting for shots outside the gardens and buildings? I have a feeling that all the photos inside will be a bit too bland and not 100% course the wedding couple would love to return on outdoor shots pissing down with rain...
I thought to come back on a nice sunny day and the shooting of the building and grounds in better weather, but this is not their day... even if I don't want to show the rain.
Can I have some assurance that come back on a nice day would be actually something good or if not any other suggestions?
I started only watch videography as a hobby over the last 9 months and that you don't have the experience and knowledge, I know that many of you guys have.
Hopeing this is I spend with decent images to edit!
See you soon,.
Docj0nes
I recently took a trip to St. Augustine, FL to produce a video marriage. I was really looking forward to capture some great images of an old city of 450 year, among the oldest in America. Ancient architecture, coastal areas, etc.
Well, it was the recent weekend where a pseudo-premier-tropical-storm event took place, and streets of the city and attractions spend a lot of time suffer rain. Of course, the bride and bridal party was not awesomely happy by it, needless to say, and yet all I could think was "well, there goes half the shots that I had planned.»
Clearly, however, I have not simply pack up and leave. Now in my scenario, the ceremony and reception were both inside, chunks of the event would be no problem. But all my shots establishing and various ideas of coverage had to be twisted.
So, instead of sticking to my original concept, I decided to embrace the weather. I shot another wedding in St. Louis the year last in the evening of a manufacture of cyclone (tropical depression at this point), it is appearance goes back to the Mississippi River. Same thing here... just kissed the winds of 50 mph (if possible) and made the most of it.
Even if the bride plan a sunny for their wedding day, they will always remember the uniqueness of their situation (in particular the marriage of hurricane). So, I captured it as best as I could to support - not delete - the memories they have of the day.
I grabbed my coat and set up some shots on a pier of demi-mille to capture the pictures side facing disturbances massive tides, waves crashing on the pier and rocks. I captured tight shots of rain descending from overhangs, restaurants and taverns. I had shots of carriages splashing through puddles of water on the cobblestone streets. A beacon that shines through the storm. You get the idea.
I have a mind to desaturate or entirely B & W some of the scenes - especially the shots of tide - to enhance the effect somewhat, but apart from that, I'm going to cut together just how it happened.
IMHO, wedding video is reality TV. You can produce a marriage like a film event, but when it comes down to it, you create not the emotions of the day, you try to capture the already increased emotions that exist in the minds of the participants.
Hope that helps. Good luck!
Tags: Premiere
Similar Questions
-
Urgent: Facing serious problems with the installation of BEEP
Hi all
This was a pain for me now,
I installed the BEEPER and his works fine. Its set up on my desk and I connect to the databases locally. But when I restart my system, OC4J would not get initialized and so I'm not able to launch published BEEP. Among the various warning messages following me:
* WARNING: Source Code C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlps
erver\WEB-INF\lib\ldapjclnt10.jar (from WEB-INF/lib/directory in C:\OracleBI\oc
4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB - INF\lib) has the same thread
Ename but is not identical to the /C:/OracleBI/oc4j_bi/jlib/ldapjclnt10.jar (of < c)
Ode-source > in META-INF/boot.xml to C:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar). If
There are different versions of the same classes, he's going to be hidden like the lat
TER is already visible in the search path for the xmlpserver.web.xmlpserver:0 charger.
0.0 *
Now I tried to copy the file on to a device at the chance of another, but still no. I reinstalled the JDK and BEEP twice but still no luck... I mean, is there a way to solve this problem. Can any body please help me with this as to why I get this warning message. When I try to reinstall the BEEP it asks me to fix it... is it possible that I can reinstall my system completely and not repair.
Need for emergency assistance (if any body wants the screenshots, I can predict that too)
Thank you
RonnyRonny,
the warning you have posted is just a warning and normally BI Publisher (OC4J) works even with this warning. There must be something else wrong.
Concerning
RainerP.S.: If it's an urgent question it might be a good idea to open a SR
-
A friend brought a Pavillion laptop, DV9832eo, asking him to run XP pro instead of the delivered vista system. (seems to me that he must perform certain mathematical impractical software to run under xp, and vista refuses outright to run it).
so far, the xp installation worked, but I'm coming up short on pilots who will race the sound, graphics (it'll work, but it does not respect the system gpu punch can), card and drive, as well as all the other stuff, they managed to pack in the case of fingerprints.
I managed to mount the wireless works, but the ethernet cable is also stubborn.
Anyone has any idea where I might start looking for some drivers?
as always is the case, it is an urgent job... not all? Well, I told her to go get a coke and a smile, because it would take more than 5 minutes
But please, if you have any (even vague) ideas where to get a driver xp will eat, pretty please, point me in that direction
Thanks for your time.
Drivers Vista for the machine will work under XP for fingerprint Authentec, Modem, card reader, quick launch (volume buttons) and Synaptics:
You will also need this software for fingerprint reader:
BIOSCRYPT VeriSoft Access Manager
-
Does anyone have ideas if you can wear the Apple Watch in a water park
Electroisolante afternoon guy, is - anyone haz of ideas so you can wear the Apple Watch at a Waterpark? Please give clues of meh that I'm about to get a Apple Watch for my birthday
Hello
Apple Watch is splash and water resistant but is not waterproof. You can, for example, carry and use it during the year, in the rain and all washing their hands. Immersing, however, is not recommended and any water that splashes on the watch must be wiped with a nonabrasive cloth and lint.
Apple stated that, for example, may affect Apple Watch water resistance and should be avoided:
- Swim or bathe with it.
- Immersing in water for long periods of time.
- Expose to water under pressure or high speed (for example, showering, water ski, wake Board, surf, jet ski, etc.).
None of the bands in leather are water resistant. The watch water resistance is not a permanent state.
More information:
-
Hello
I have an urgent problem, I would really appreciate help with.
I have a terminal block (SCB-68) connected to a multifunction data acquisition (6341). There are 4 entries in the Terminal:
1 sensor laser displacement, coming from a controller as a signal of analog voltage output ("1V" and "0V" on the controller). Connected to AI 0 and GND.
2. The accelerometer (PKI, coming from a then the voltage signal conditioner) connected to GND AI and AI 10.
3 load cells (PKI, coming from a then the voltage signal conditioner) connected to AI 11, 12, 13 and 14, each connected to the GND PIN is close.
Problem:
By MAX, if I read in 6 channels above my data acquisition (6341), my displacement sensor (#1) and the accelerometer (#2) behave very well. However, among the channels (AI 11 and AI 12) load cell switch in tension, as if they follow the movement sensor voltage (#1). For example, there is usually a mV - 800 in AI 11 voltage change.
This problem disappears when I'm not reading travel (HAVE 0, #1) laser. that is as soon as I remove this channel of my task, the readings of cell and accelerometer support back to normal (base voltage ~ 0V). Yet once if I ask again the laser channel, I see a vertical movement in the readings of load cell 2 (displacement varies with the current tension HAVE 0).
Attempts of fixation:
-tried to change the differential using AI laser sensor 0 and AI 9
-tried to delete the field of laser 120V Power
Any ideas at all would be greatly appreciated!
SCB-68:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180
SMU-6341:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207415
This is the general idea. If you must use high impedance sources and that you have enough channels available, placing a channel of the grounding of entry between each other usually helps. You must analyze these chains grounded. Just grounded isn't them enough.
Example: Sensor has = AI0, ground = AI1, sensor B = AI2, ground = AI3, sensor C = AI4, AI5 = ground. Read AI0:5.
Lynn
-
URGENT... Driver video problem Check
140105 URGENT... Driver video problem Check
(will take other ideas on what to do for video problem)
performance of device drivers fix security
my video seems to be a xp machine.
When restoring from my pc to an earlier date, it seemed to alleviate the problem.
When I boot in safe mode, I have a video perfect (with the exception of the size of the objects).
When I reboot, screens of washing washing & microsoft come up, when get to xp blue light / logon screen it goes black.What is this 'supposed' to have a problem with?
is there a way to get a proper driver download?
and: is there a utility to repair the files without destroying the data...
Thank youhave: windows xp3 sp3, viewsonic va800 monitor
I went to the site of the Lim. think that was part of the problem with saw to no support. sent them an email / current.
check microsoft to the drivers FRO viewsonic va800, except if someone can help with a good method of downloading drivers before hand.
Hi Dave,.
I could be wrong, but "Viewsonic va800" resembles a monitor? I think that you need to update the drivers for your graphics card. In Device Manager, look at "Graphics cards" (that's what they are called in Windows7, could be something different in xp...).Take a look at this site for more information: http://pcsupport.about.com/od/fixtheproblem/ht/updatedriverxp.htm
Because every PC is different (a different material) you're not going to find specific instructions, I'm afraid).
Hope that helps.
See you soon
Rich -
I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:
STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)
ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.
I need urgent help.
And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?
Why windows XP?
It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.
you will be also problems of drivers/hardware as acpi.sys
If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.
-
Integration of URGENT: CWMS Question
Hi all
I have a question about integration with CUCM CWMS.
Customer wishes to have 2 CWMS integrations separated with the same cluster of CUCM. It will use 2 Admin and 2 URLS of the user.
This is, is this possible integration with the same Cluster of CUCM?
Reason is, he got 3 UCS 220M 3 boxes and wants to use 2 of them in HA mode and 1 as standalone integration with the same cluster of CUCM.
Please note the UCS that the client has obtained is compatible for the deployment of 250 users only and that he bought 2, 250 licenses so total 500 licenses.
Idea is to have 2 UCS in HA mode and the third one independent but integrated whole with the same cluster of CUCM.
It's quite urgent.
Please provide your expert advice.
Concerning
Rajiv
Hi Rajiv,
These two separate systems of CWMS will have two access to different numbers? These two separate systems will have the same user base (will integrate you with LDAP on CUCM using AXL)?
In theory, there is no limitation on the number of solutions CWMS you can have with a single CUCM cluster. You have different models of road, SIP trunks, etc. for each of the systems.
I hope this helps.
-Dejan
-
How "tile" or several photos for the first selection in cascade? URGENT
I need a program such as Microsoft photo editor that I can use on Windows 7.
I need to see and COMPARE the macro shots of flowers and birds next to choose one that is suitable for my for my calendars and photo cards nature. I want to open several photos, "tile" or "cascading" them and study them simultaneously for the home and details. How can I do this under Windwos 7? Why this option has been removed? In Solution Explorer, I could do that before. For manipulation and editing, I have 2 photo to choice programs. I need a system to make a first cut I had for years before I got the new computer. It is urgent with the coming holidays and a deadline to make my selections.
Thank you
EvaI need a program such as Microsoft photo editor that I can use on Windows 7.
I need to see and COMPARE the macro shots of flowers and birds next to choose one that is suitable for my for my calendars and photo cards nature. I want to open several photos, "tile" or "cascading" them and study them simultaneously for the home and details. How can I do this under Windwos 7? Why this option has been removed? In Solution Explorer, I could do that before. For manipulation and editing, I have 2 photo to choice programs. I need a system to make a first cut I had for years before I got the new computer. It is urgent with the coming holidays and a deadline to make my selections.
Thank you
Eva========================================
The following article might be worth a visit:Windows 7 - view and organize Images in the library of photos of Windows 7
http://www.Dummies.com/how-to/content/view-and-organize-images-in-Windows-7s-pictures-Li.Navid-323826.htmlAlso, XnView has an option of free software compares nice.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)XnView
http://www.XnView.com/en/XnView.htmlBasically, you select up to 4 tiles and type SHIFT + C
See the following screenshot:
Compare XnView
http://i50.Tinypic.com/m9qgkg.jpgWhen you have finished... Press ESC to return to normal mode.
And the following article may be helpful:
How to compare several Images with XnView
http://graphicssoft.about.com/od/XnView/HT/compare.htm -
I need urgent assistance please. I'm recharging my Creative Suite 6 to new PC. I have the serial number, but it says it is incorrect. Please, please help as I am in the middle of a project. Why, why? It is said that the serial number is not valid - I have tried several times.
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
- and http://forums.adobe.com/thread/1038761
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
URGENT! -unwanted padding-top in IE but not in FF - HELP!
Hi guys - please help me urgently!
The attached page is explicit. This is installation 2-Chronicles regular: content principal, right sidebar, header and footer. Right sidebar is floating div element. Just what is inside it is positioned well in Firefox, but is down from some 30 pixels in Internet Explorer (I have IE 8). This inconsitency is very frustrating.
Any ideas how to fix this bad guy?
I need complete things today!
Thanks in advance,
Ziggi
Page in Firefox 3.5
Page in Internet Explorer 8
The answer is in your code. You have:
This condition adds a top if you're in a browser IE filling in the sidebar. This may have been a hack for correct rendering of earlier versions.
Get out the conditional style (or modify) to see if it's what causes gout 30 px.
Beth
-
In INTERNAL/ADMIN, there is a function to block the workspace that locks everything, including enforcement. I can't find a way to unlock it? !
Any help much appreciated.
ShuntHello
Help...
>
Caution:
Locking a workspace makes it inaccessible permanently.
>
Indeed of the scary stuff!Shunt, you have been here long enough to know not to mark issues URGENT! ;)
However, since the great Mr. Spadafore I found this...
>
You can use the apex_admin application to modify this workspace user accounts and define each of these unlocked. Then, the administrator of the workspace will change the availability status of each request and assign the "available w/edit links ' or whatever you want.
>
He goes on to say that this is the only way. I have no idea on APEX 4 in this regard well.See you soon
Ben
-
Hi friend;
I had an urgent problem. I am after upgrade to latest OracleAS 10 g 10.1.3.x game patches in Oracle E-Business Suite Release 12 [454811.1 ID]
I had a problem and I restart installation but I screen YES,.
There are no patches to apply patches 10.2.3.5 group of the Oracle application Server patchsert
I have no oraInventory and I followed:
How to create an own oraInventory in Release 12 [834894.1 ID]
My oraInventory I created his shows:
inventory_loc = / etc/oraInventory
inst_group = s/n
Anyone have idea?
Respect of
HELIOSHelios,
Please see if help solutions contained in these documents.
Note: 437940.1 - when installing a group of hotfixes, YES will display a warning "no patches that must be applied since the Group of patches"
Note: 1104363.1 - it has no patches that must be applied there since patches Oracle Application Server Group group of patches 10.1.3.5.0Thank you
Hussein -
* urgent lsnr *.
Hi ludo;
I need your urgent assistance;
My sqlnet.ora clinet is:
sqlnet.ora # Network Configuration file: C:\oracle\product\10.2.0\client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers can opt for
# install 'Software Only', this file does not exist and without the native
authentication #, they will not be able to connect to the database on NT.
SQLNET. AUTHENTICATION_SERVICES = (NTS)
#NAMES. DIRECTORY_PATH = (TNSNAMES)
My Client's tnsnames.ora:
tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
SID =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = MACHINEIP)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = SID)
(SERVER = DEDICATED)
)
)
When I try to connet db I have this error:
C:\Documents and Settings\ > sqlplus system/pass@SID
SQL * more: Release 10.2.0.1.0 - Production on
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener is not currently of service requested in connect
descriptor of
Enter the user name:
MachineIP is virtualIp, any idea?Hello
ORA-12514: TNS:listener is not currently of service requested in connect
descriptor ofPlease see (Note: 77640.1 - the SERVICE_NAME parameter - resolve the error ORA-12514).
MachineIP is virtualIp, any idea?
It is perhaps the two according to the entries you have in the file hosts, so make sure you entered valid in the hosts file.
BTW, it worked before? If so, the changes have been made recently? Try to remove the listener and create it again and see if that helps.
Kind regards
Hussein -
Urgent! Script of jargon to display dynamic slides in the projector does not
URGENT matter!
I've developed a lingo than fileIO uses script to count the number of BMP files in a directory, then jargon creates dynamic actors and then I create a newMember (#bitmap) and importFileInto allows to load BMP images dynamically in the cast. It all works very well within the Director! However, when I publish to a projector not load or not to display the slides for some reason any. I also made sure to include each extra under the Sun with the projector, but it still does not work. I'm including the code that I am running below. I'm at the end of the project and thought, that everything has been well-oiled. All ideas are welcome!
Thank you!
Charles
----------------------------------------------------------------------------------
Believe it or not, I've been tracking the issue. There seems to be some kind of problem with some commands from an other Xtra I was using. I have the resolution running Xtra which allows to force the resolution of the screen among other things. I put comment lines
-disable_task_switching (xResolution)
-hide_taskbar (xResolution)
-hide_desktop (xResolution, 0, 0, 0After his comments on these lines, my images loaded fine. Very strange problem and I have informed the author of the resolution xtra on this problem.
Charles
Maybe you are looking for
-
Safari crashes when you visit some Web sites.
Safari freezes when I visit certain websites. The sites include espn.go.com and www.nytimes.com. I think it might have something to do with the graphics on the page. I have the latest version of Adobe Flash Player installed. The gel causes me to rest
-
How to query the object module for the interface of the module interface specific, I need
Hello. Currently using LabVIEW TestStand/2012 2012. I am looking to change the sequence of LabVIEW text translator, and in the CreateStep.vi I am trying to create a step of type WIS_Sequence_Call (a customized version of NI_Types.ini--> SequenceCall)
-
my laptop pointer freezes sometimes and does not work properly
I have a sony vaio notebook. This pointer does not work properly most of the time, and it freezes. I have to restart my computer to fix it temporarily, but it happens again and again. I wonder if my system is infected with a virus or not. can fix thi
-
The firewall cannot be activated
My security shield icon is on in the status bar. It says firewall is not enabled. Try to turn on (in Control Panel) and message is due to an unidentified problem, windows cannot display the firewall settings. How to solve it?
-
I have a new computer come with Windows 7 on it. But he had no office on this subject. I got my Microsoft Office Professional Edition 2003 and installed on this computer. First, all programs (Word, Publisher, etc.) open, except Outlook. There was an