URGENT! Lost + 700 GB after partitioning

Similar Questions

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Unable to start bootcamp after partitioning El Capitan

  Lonely HI T,

  I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

  Here's the info re: my product:

  Here is some information about: my volumes:

  • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
  • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
  • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
  • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
  • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

  Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

  I already had Tuxera NTFS installed but uninstalled.

  Below you will find the following information:

  • diskutil list
  • Cs diskutil list
  • sudo TPG - vv - r see the/dev/disk0
  • sudo fdisk/dev/disk0

  Thank you for the patience and kindness in advance,

  CESCO

  Last login: Tuesday, February 2, 23:22:10 on ttys000

  Cescos-iMac: ~ list of the Cesco$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

  5: Microsoft data base SOLID 150,0 GB disk0s5

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Macintosh HD 899,2 GB disk1s2

  3: Apple_HFS Recovery HD 650.0 MB disk1s3

  4: Microsoft data base LIQUID 100.0 GB disk1s4

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 500,1 DIS3

  1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ list of cs Cesco$ diskutil

  No logical volume group CoreStorage found

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  683542528 262144

  683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Cescos-iMac: ~ Cesco$

  Re: Unable to start bootcamp after partitioning El Capitan

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  It will show you the first block of the SOLID wall.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

  I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

  Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

• Assistance button works do not (= does ' t start VAIO Care Rescue) after having lost and recover the partition table / MBR

  Hello

  For some reason that I lost my patition table but I was able to get it back and I'm rewriting MBR. I'll be back all my partition and files contain the VAIO recovery partition except files on the operating system partition ("C:\ »). It's an unformatted partition. VAIO Care rescue didn't work so I had to format "C:\". "and reinstall windows 7 and now all is good.

  I have VAIO Care Rescue. I think that it is enough to change the partition table / MBR. What exactly is the problem and is it possible to fix the problem of button Assist?

  
  And if one removes all xxxx (include VAIO Recovery) and creates new ones, is it possible, software or image of the recovery restore partition and Assist button start VAIO Care Rescue?

  My laptop model: VPCEA25FG

  Thank you

  You can restore your computer back to factory with all the pre program and software installed by using recovery discs. For further assistance, please recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/support/product/VPCEA25FGfor your model of Asia-Pacific computer. Thank you.

  If my post answered your question, please mark it as "accept as a Solution.

• Lost to a data partition drive letter. Restored by using diskpart

  Original title: lost Partition... Help, please...!

  Initially, my hard drive space of 320 GB, with that one drive than C: and another drive is D: that is recovery drive. I have vista home premium 32 bit OS.

  I wanted to make a partition and so I shrunk C: drive by going right on my computer - manage - disk management - selected the C: drive and retractable... He gave me the new disc called F: with 66,93 GB of space... I moved some data in the F: drive. He has worked for two days, but now I can't see drive F: in my computer, but we see here in disk management with the allocated space of 66,93 GB... It does not drive letter show he... It's in the blue bar. and I was unable to open it, or view the properties.

  It prompted an error message: "operation failed to complete because the disk management console view is not updated...» »

  Is there anyway that I can open it? or other means to recover the files? My personal data are there I want to come back...

  Help, please.! I m desperate... I really need the files...

  Hi Roland Bhatt,.

  Thank you for visiting Microsoft Answers.

  Try to use diskpart to assign a drive letter to the drive.

  1. on the start Orb > type diskpart.

  2 - Click on diskpart in the above results > click Run as administrator.

  3. after diskpart loads type list volume, press on enter.

  You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

  4. type select volume 6 (replace 6 with the number of the volume assigned to the partition in question).

  5. type assign letter Z (replace Z with the letter you want to assign).

  When you look in the computer, you should be able to see your score.

  Reference:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• lost some photos after the system update

  Hello

  I did an update on my Mac for OS X El Capitan 10.11.6. After that, I realized that I had lost some of the photos that were stored in the iPhoto application. When I open an app (even if I use the "Photos" application), I can see only the photos that were taken with my iPhone (so the pictures that are on my cloud), but I can't view all the other pictures I've added to the library. I tried to look in the trash, but I couldn't find anything. I checked and I have two files in the folder 'Picture', called an iPhoto library and a library of Photos called. They are of different size, but they store the same pictures (when I opened one of the two app, they show the same photos). Please help me find them! I have not deleted so I can't figure out how and why they are no longer in the iPhoto application.

  Thank you very much

  ELISA

  Your question is not clear - you expect import photos in pictures to show too much of iPhoto? If it's not the way it works - iPhoto and photo each have their own separate library and it restricted in anything done in one application

  And iPhoto is a dead product and it would be better to win and use photographs because he has a future

  LN

• Configurations of lost and extensiions after update to version 19.0.2

  Hello
  After update to version 19.0.2, I lost all definitions (open page, delete cookies after closing the browser, etc.).
  And all extensions have disappeared.
  I see a folder with old Firefox data with my extensions and many other things...
  How to import old data for Firefox?
  Thank you
  Carlos

  Type of topic: addons top right of the URL you can see the setting icon, click that and choose to install the module file , choose the folder of the extension in the 'old profile data"and install it.

  its as in format

• Lost some tabs after opening Firefox

  close firefox with 2 windows & about 10 tabs for each, after opening, I have 1 window with 10 tabs and 10 empty new windows! What is the problem with my second tabs window?

  It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.
  Delete the sessionstore.js file [2] and files possible sessionstore-# .js [3] with a number and sessionstore.bak in the Firefox profile folder.
  Help > troubleshooting information > profile directory: opens showing the file
  http://KB.mozillazine.org/Profile_folder_-_Firefox
  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

• Lost Office 2010 after HP Smartfriend Service

  Lost my Office 2010 after HP Smartfriend Service. It shows that Office 2010 is installed, but says that I need the product key which I can't find. Computer was purchased with Office installed in 2012.

  Ricky-o, welcome to the forum.

  If you have registered your copy of MS Office, you can call Microsoft Customer Service.  They will have a record of your registration and will be able to help activate.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows 8 already downloaded does not start after partitioning

  Merge two partitions of the space unallocated readers D use third-party software AOMEI partition Wizard. system unbootable Windows 8 but menu boot priority is displayed. When the hard drive selected d same process iterates.

  Hi Sourabh,

  Change the partition could have led to the loss of the starting path. So, even after the selection of hard drive, the system is not able to start Windows. I suspect that the only option is to load the default values using a recovery image. Please backup all data before starting the recovery.

  I hope this helps.

• Boot camp won't load windows installation after partitioning HD

  Hi, I am trying to install Windows 8.1 on my Macbook Pro (retina, 13-inch, early 2015, El Capitan). I have the ISO 64-bit file and load the application of assistant boot camp to make the installation process. She was able to partition my hard drive, and after that, he tries to restart in windows. However after a little more the blue screen with the windows icon turns into a blue screen with an emoticon, frowny face and a message saying "your PC came across a problem and must restart. We are only collecting the error information, and then we'll restart for you". After about a minute, restarted my computer, but in the mac OSX... How should I complete the installation of Windows?

  Stop your Mac, start it and hold the Alt/Option key. If you see a Windows or Boot EFI icon, select and check if your installation will start. If it is not the case, use BC Wizard to delete the partition of BC and start the process.

• lost that day after 3 Jul 09

  I lost all the files, settings, programs, physical facilities. I think that this has happened after an automatic update on July 3. It's as if the computer resets to factory settings (almost, because my computer name is there and I downloaded Firefox).

  I tried to restore, but it couldn't cancel the updates. I would like to restore to 2 July, but this date is not an options seems. Anyway, restoration did nothing.

  Information system: Vista Home Premium, 64-bit, SP1.

  Hi k88888t,

  Thank you for visiting the Microsoft Windows Vista Forums.

  Since there is no available for July 2 restore points. Unfortunately, you will not be able to restore the computer. However, you can try to uninstall the update manually.

  If the problem occurred after installing the update, then uninstall the update should solve the problem.

  Click Start, type appwiz.cpl, and then press ENTER.
  In the list of items, search for updates or programs and the date on which they were installed, and then remove it. Follow the steps in the article to remove the SP2 update successfully: http://support.microsoft.com/kb/948537
  Restart the computer for changes to take effect.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:
  Syed V - Microsoft technical support.

• Lost network access after installing SP3 on XP Home Edition

  I have several computers running a combination of XP Pro, XP Home, Vista and Windows 7 on a network home. I just updated the XP Home Edition SP3 from SP2 (XP Pro running SP3). After that, I lost the ability to access to the files on the XP Home Edition on the other computers. I have granted privileges of sharing and can see the computer in my workgroup. But when I try to access the share, I get the error message \\Name "is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Logon failure: the user has not granted the type of logon required on this computer. »

  I am the administrator. How to grant the necessary rights?

  Thanks a lot for your help.

  Unshare and re - share the folder on the PC SharedDocs.  Then, try to access it from the laptop.

  If this does not help, what version of XP each computer there?  Network installation share may differ between XP Home and XP Professional.

  If the PC is XP Professional, go to control panel > Folder Options > view and scroll to the end of the list of advanced settings.  If "Use sharing simple files (recommended)" is checked or unchecked?