(Urgent) Operating system drivers went

Similar Questions

• New operating system drivers has not transferred

  I recently bought a HP Pavilion DV7, product number: LW174UA #ABA of my friend and decided to install a new operating system on it. My boyfriend does me a lot about what was wrong with it, other that he ran a little slow. I thought it was pretty cheap and I could easily throw this topic, rather than use Windows 8.1 Windows 7 x 64 x 64 which he had installed on it earlier and use it as sort of a backup on my desk.

  I installed a new copy of Windows 7 Professional x 64 on it, and when the installation is complete, I noticed I could not access the internet or use usb drives. I went into the Device Manager and discovered that a handful of decives had the symbol explanation of warning yellow triangle next to them. I looked the problem quickly and noticed most of them had error Code 28. He told me I need to install the drivers for the parties.

  Well, that shouldn't be too difficult. I found the WiFi driver and installed. The problem has been resolved (temporarily) and I could access the internet.

  After searching through forums, I discovered that my usb problem can be many different questions. Then, I came to the conclusion that an updated service pack (since I couldn't find the usb drivers) should solve the problem. No, the usb drivers still have not been properly installed. In addition to this, the internet now truns on and outside. I'll have access for a few seconds and then my computer tells me that I have not any conntections.

  Is anyone know what I got wrong or where I can find drivers that might solve this problem?

  I already went to the site of HP drivers and installed most of the pilots. Things like the finger print scanner, that I am not too concerned by at the moment so I jumped on those.

  Hello:

  All the drivers you need are on the support page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5118761 #N503

  The problem is one of 3 controllers different usb 3 that could have been used in your machine.

  So for all the devices that need drivers, click on each of them and display the ID of the equipment for them.

  I will guide you how to find the hardware for the USB controller ID...

  Click on the USB controller needing a driver in Device Manager,

  Then click on the Details tab in the upper part of the window of the usb controller.

  Now, you see a drop-down list of property and it is set by default to the description of the unit.

  On this list and select the hardware identification label.

  After the first string of characters you see in the window.

• P850 satellite destroyed by the Windows operating system

  Hello.

  I own a Toshiba Satellite laptop model: P850 part number: PSPKFV-00H002AR bought the United Arab Emirates.
  OS: Windows 8 x 64 pre installed/installed at the factory.

  It doesn't have the capabilities of the 3D display.
  There can be no Blu ray.
  It has the fingerprint reader.

  Since I started using it I have big problems with the operating system, drivers and utilities Toshiba.
  * I'll post the PROBLEMS the MOST IMPORTANT I have so that I can get help easier.*

  Initially, the laptop felt good, utility worked as they should. the only thing that was not at any time was the ECO button, but not a big problem. * Accelerator of Toshiba HDD has been working flawlessly.*

  The first thing I did when I started using my laptop has become familiar with the operating system and of course to create a secondary partition for my stuff (files and so on)

  I used a * free * 3rd party software called:
  * Mini partition Wizard tool * which turned out to be very good.
  http://www.partitionwizard.com/PartitionManager/Windows-8-partition-manager.html
  (no not advertising, it's a free and very useful program)

  Before performing any operation, I made a thorough search for the operation of the recovery and windows partitions 8 so that I don't accidentally makes them useless.

  * The first thing I did was record to create 3 DVD using "Toshiba Recovery Media Creator."

  * Then using the above mentioned software (partition Wizard) I created a second score by taking the amount of space between the Rugged C
  * During the creation of a second partition (called D) I _DID friezer move, resize, format or fusion of the partitions.* system and recovery plant

  Then I continued using the computer for things I usually do. I've updated some drivers, windows installed and computer updates worked well.

  * Then Microsoft has officially released windows 8.1 * so I decided to give it a try. I have read the manual about installing "* updated Windows 8.1 *" Toshiba driver download page. Windows 8 updates installed, then went to store * downloaded windows 8.1* and waited the installation.
  Then I continued to update my drivers as it said in the manual.

  * When working with partitions on my drive and before installing windows 8.1 I Formaldeide disk of windows and Partition Assistant Manager screenshots_ *.

  * After the installation of Windows 8.1, I immediately noticed that the installation has created a partition_ of recovery (also known as Windows RE) _the with the 350 MB_ _size *.
  I of course took screenshots of windows disk manager and mini partition Wizard tool.

  I'll upload the screenshots as soon as I can please stay tuned.

  > Y at - it a way to factory reset and return to windows 8 and return the * HDD factory State? * Exactly as it was when I opened the box?

  Of course, you can return to the factory settings. You said that you have created 3 discs of recovery using Toshiba Recovery Media Creator.
  These disks will again install the image of Toshiba and will fix the laptop in the same condition as at the first day of the purchase.

  Take the first disc, the start of this drive and follow the instructions on the screen

  Note: this will format the HARD drive and delete the created partitions.

• WeatherBug: App incompatible with the installed version of the operating system (HP Slate 7)

  Greetings!

  First post of this forum and a relatively new user of any kind of Tablet.  Yes, sorry if I miss some "Exchange of detachment" to ask for the help.

  There is a NEW Tablet and after download/installation of operating system updates, went to download WeatherBug on Store.  WeatherBug was not available.

  I found an alternative download site, but was messaged that the version is not compatible.

  It seems strange that I've installed WeatherBug on all everything I have.

  Android version: 4.1.1

  Kernel Version 3.0.8.

  Build number: HP_Slate7 v1.05.8_user

  Thank you!

  Hello BigSkyMike, welcome to the HP support community!

  Unfortunately, since the Slate7 has no built-in GPS chip, programs are written and require the chip will be displayed as "incompatible".

  There are solutions, and these have been discussed in other threads like this one:

  http://h30434.www3.HP.com/T5/Android-tablets-e-g-HP-slate-7/apps-like-Instagram-not-compatible-in-Slate-7/m-p/2746285#U2746285

  WyreNut

• Computer laptop dv6 Pavilian: I need the original operating system for a Pavilian model dv6 dv6 1355dx

  I have upgraded to windows 10 and did not like it and tp attempt to restore the computer and accidentally erased my original windows 7. I then bought and installed windows 7 64 bit and the computer does not work properly; I need now the drive of 32-bit windows 7 original.

  Gurk

  Hello;
  
  Let me welcome you on the HP forums!
  
  I wish I had some good news for you, but I did not...

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This means that the stock HP is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Inspiron 1721 operating system 32-bit home premium 2006

  I have an inspiron 1721 32-bit operating system, the home premium 2006 with the disc of the operating system, drivers & utility disk, microsoft works suite 2006. In what order should I load them. After that, I think I need service pack 1 and service pack 2, but when looking for the 2 I find there are like 15 different so I need to know what we need.

  Hello

  This should help you:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  And if this does not resolve your problem, please contact Dell or their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  After completing reinstallation > click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• How can I get rid of a Vista OS after receiving a message "and not a true" operating system? You need to install a purchased Win 7 OS.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  . Can IdeaHow I remove Windows Vista from a Dell 1705 after receiving a warning of non-genuine software.  Replaced the original disc, since we found that the startup disk, we used a disk from another computer to boot Vista, it worked fine for a while then we received the message after several weeks ' not a real...» "OPERATING SYSTEM.  Went out and bought a Windows 7 operating system and when I put the disc in the slot, nothing happens.  What should I do now? Should Vista be deleted?  Can't get to a screen to start window, even tried to format drive in command prompt and all I get is an error message about the need to be an administrator.  It is computer.s home my husband:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  . Can IdeaHow I remove Windows Vista from a Dell 1705 after receiving a warning of non-genuine software.  Replaced the original disc, since we found that the startup disk, we used a disk from another computer to boot Vista, it worked fine for a while then we received the message after several weeks ' not a real...» "OPERATING SYSTEM.  Went out and bought a Windows 7 operating system and when I put the disc in the slot, nothing happens.  What should I do now? Should Vista be deleted?  Can't get to a screen to start window, even tried to format drive in command prompt and all I get is an error message about the need to be an administrator.  It is computer.s home my husband:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey DMC1014

  You cannot remove vista from vista

  you need to boot from your windows 7 dvd

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  you remove the vista operating system by making a customized windows 7 deletion of partition of vista installation process

  and read below tutorial

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Walter, the time zone traveller

• Can I use a legitimate DVD Win7 product key to activate the operating system already installed?

  I used a DVD Windows 7 Home Premium I bought from Amazon to install on 2 computers, THEN discovered the 2nd computer would not accept the product key.  I don't want to reinstall the OS and I can't seem to find a place online legitimately sell just a product key, so if I buy another DVD on Amazon, the product key that comes with it will allow the existing installation to activate, or do I have to spend a day or more to reload the operating system, drivers, programs, settings etc, just to stinking activation?

  This information is partially incorrect. OEM System Builder licenses come with a product key.

  Yes, it does not require a clean install, but because you already have Windows 7 Home Premium installed to use your retail disk, all you have to do is to change the product key, no installation required.

• received a pavilion m8200n work. The hard drive was wiped out. I need the cd of the vista operating system. I have the

  Hello I had a model of work but the hard drive has been wiped. I can't load windows XP on this pavilion m8200n?

  I would recommend that you buy the kit recovery for m8200n which will restore the factory installed the operating system, drivers and application software. Here is the link to a site where you can order the kit of third party recovery:

  http://www.computersurgeons.com/

  NOTE: HP does not recovery for older models kits.

• Drive hard Crash - new operating system, help with drivers

  I need help... my Dell XPS 8300 has experienced a fatal hard drive crash last week.  I went out and that you bought a new hard drive, and then Support Dell sent me a copy of Windows 7 to load up on the machine.  I have successfully loaded the operating system, but all of the drivers are missing.

  Fast forward, I went to another machine (operation) and downloaded all the drivers applicable from the Dell site associated with my Service tag (on a flash drive).  Also, I burnt the drivers on a disc.

  Here's the question: how to load the drivers on the Dell XPS? The files (on the flash drive or a cd) are not recognized by the Office?

  Use Downloads.Dell.com and ignore the Dell Download Manager. For the XPS 8300:

  http://downloads.Dell.com/published/pages/XPS-8300.html

• OfficeJet 6960: Install the HP drivers on VISTA operating system

  I tried to install the drivers from the disc and the HP site and I get the following error. But all the documentation is that this printer is taken in charge under Vista. Can anyone help?

  This computer is not responding it following the system configuration required (s):

  The operating system on this computer is not supported. For a list of operating systems supported, please check HTTP://www.hp.com

  Hello

  The printer is on Vista 32-bit, 64 bit not supported.

  Operating systems supported
  
  32-bit only, 2 GB of available disk space, CD/DVD player or Internet connection, port USB, Microsoft® Internet Explorer 8

  http://store.HP.com/SwitzerlandStore/merch/product.aspx?ID=J7K33A & opt = 625 & salt = PRN & lang = in-ch

  You will need to change your operating system or to replace the printer, 64-bit support is only available for Windows 7 or later.

  Kind regards

  Shlomi

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!

• Window xp sp2 professnal operating system and drivers for compaq 420

  Hi comrades.

  I buy a new computer compaq 420 laptop. I have installed window xp professional sp2. after complete installation, the drivers are needed for the healthy material. I go to my computer then select Properties Device Manager and see the following drivers required

  1. hp integrated module

  2. network controller

  3. PCI device

  4. video controller

  5. video controller (VGA compatible)

  Then I click on the hp site enter the product number select the operating system and download the drivers and install it.

  I explain all the above procedure, a situation of problem or interbreeding because of swear I've met who, in virtue.

  I have install the driver of HP integrated module, video network controller and also .netframework 3.0 Microsoft.

  Now there is no sound / audio so I install the audio drivers sound is the device driver PCI is ok after installing the audio driver but HIGH DEFINATION AUDIO BUS DRIVER SHOWN in the DEVICE MANAGER I ALSO DOWNLOAD IT of THE SITE HP

  BUT ALWAYS YELLOW ICON IN THE DEVICE MANAGER. SOME OF MY FRIENDS SUGGEST ME THAT DOWNLOAD THE UAA BUS DRIVER 1.0 OF MICROSOFT, I DID INSTALL THEM, BUT THE PROBLEM STILL THERE.

  How to SOLVE THE PROBLEM?

  The other problem is that HDA bus once is ok, but the PCI bus becomes yellow. I have search everywhere on the web but not found.

  I explain every thing here please help me.

  Thanks and greetings

  Hello

  First download and install:

  Intel Chipset driver ici

  and don't forget to restart your system when you do.

  To get to his card work download and install first:

  MS-UAA for XP with SP2 (required with a reboot before the graphics and Audio, Modem driver) here

  Only after this, download and install:

  IDT Audio high definition (HD) Driver here

  Now install the driver for graphics card:

  Driver video Intel and control panel here

  Peripheral PCI should be modem:

  LSI High-Definition Audio (HDA) Modem Driver here

  HP integrated module (which is for sure Bluetooth) and network controller have few opportunities on your list of model drivers, so we will need more information to give you an answer corerect to solve these two problems. Reach:

  Control Panel-> system-> hardware-> Device Manager

  Click with the right button of your mouse on each yellow sign with exclamation point ( ), and then choose Properties. Then, go to the ' Details ' tab and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  
  
  

• Reinstalling operating system and drivers only. Don't want any other software and tools...

  Hello

  I want a clean reinstall on my HP Mini 210. How can I reinstall the operating system and drivers only from the recovery partition? I don't want any other software and tools HP...

  P.S. I've done a reinstall from the recovery partition and then spend many hours, removal of unwanted and tools software, but traces of these programs remain anywhere in the registry, the Program Files folder...

  Here are the specifications of your computer of HP Mini 210-1077CA. According to the specification, this model comes with Windows 7 Starter, which is installed at the factory.

  Please see "Recovery discs to create or save an Image to a USB (Windows 7) recovery" for instructions on creating recovery media. See also "Using System Recovery, Factory Reset and Minimized Image Recovery Options" to determine if your computer supports the "recovery Image reduced" and how to perform this recovery option, if it supports.

  Reduced Image recovery does the following:
  Reinstall the original operating system.
  Re-installs all the drivers of original material.
  Reinstall the HP essential software (e.g., HP Support Assistant, HP Recovery Manager, etc.).
  Don't install applications for testing or trial games.

  Please click the White Star of KUDOS to show your appreciation

• How to create Multi boot Operating System CD/DVD with drivers, application as default installation and Recovery Console alongwith with operating system encryption?

  I need an application for creating operating system in multiboot with drivers, application as default installation with the Recovery Console and operating system encryption. Help, please...

  Thanks in advance...

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro