Urgent! Users of remote access VPN connects but cannot access remote LAN (ping, folder,...)
Hello
I am setting up a VPN on a Cisco ASA 5510 version 8.4 remote access (4) 1.
When I try to connect via the Cisco VPN client software, I am able to connect however I am unable to access network resources.
However, I can ping the servers in the other site that is connected through the VPN site-to site to the main site!
VPN client--> main site (ping times on)--> Site connected with the main site with VPN S2S (successful ping)
Please help me I need to find a solution as soon as POSSIBLE!
Thank you in advance.
Hello
Please remove the NAT exemption and the re - issue the command but with #1, so it will place the NAT as first line:
No nat (SERVERS, external) static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination
NAT (SERVERS, external) 1 static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination
After re-configured this way, make sure that this command is also available:
Sysopt connection permit VPN
This sysopt will allow traffic regardles any ACL a fall, just in case. Please continue to run a package tracer and post it here,
Packet-trace entry Server icmp XXXXXX 8 0 detailed YYYYY
XXXX--> server IP
AAAA--> VPN IP of the user
Don't forget to do the two steps and a just in case, capture Please note and mark it as correct the useful message!
Thank you
David Castro,
Tags: Cisco Security
Similar Questions
-
Cisco ipsec Vpn connects but cannot communicate with lan
I have a version of cisco 1921 15.2 (4) M3 I install vpn ipsec and may have customers to connect but cannot ping anything inside. A glimpse of what could be wrong with my config would be greatly appreciated. I posted the configuration as well as running a few outings of ipsec. I also tried with multiple operating systems using cisco vpn client and shrewsoft. I am able to connect to the other VPN ipsec running 1921 both of these computers by using a client.
Thanks for any assistance
SH run
!
AAA new-model
!
!
AAA authentication login radius_auth local radius group
connection of AAA VPN_AUTHEN group local RADIUS authentication
AAA authorization network_vpn_author LAN
!
!
!
!
!
AAA - the id of the joint session
clock timezone PST - 8 0
clock to summer time recurring PST
!
no ip source route
decline of the IP options
IP cef
!
!
!
!
!
!
no ip bootp Server
no ip domain search
domain IP XXX.local
inspect the high IP 3000 max-incomplete
inspect the low IP 2800 max-incomplete
IP inspect a low minute 2800
IP inspect a high minute 3000
inspect the IP icmp SDM_LOW name
inspect the IP name SDM_LOW esmtp
inspect the tcp IP SDM_LOW name
inspect the IP udp SDM_LOW name
IP inspect name SDM_LOW ssh
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-2909270577
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2909270577
revocation checking no
rsakeypair TP-self-signed-2909270577
!
!
TP-self-signed-2909270577 crypto pki certificate chain
certificate self-signed 01
license udi pid CISCO1921/K9 sn FTX1715818R
!
!
Archives
The config log
Enable logging
size of logging 1000
notify the contenttype in clear syslog
the ADMIN_HOSTS object-group network
71.X.X.X 71.X.X.X range
!
name of user name1 secret privilege 15 4 XXXXXXX!
redundancy
!
!
!
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group roaming_vpn
key XXXXX
DNS 192.168.10.10 10.1.1.1
XXX.local field
pool VPN_POOL_1
ACL client_vpn_traffic
netmask 255.255.255.0
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
!
!
crypto dynamic-map VPN_DYNMAP_1 1
Set the security association idle time 1800
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
list of authentication of card crypto SDM_CMAP_1 client VPN_AUTHEN
map SDM_CMAP_1 isakmp authorization list network_vpn_author crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic VPN_DYNMAP_1 ipsec crypto
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP 76.W.E.R 255.255.255.248
IP access-group ATT_Outside_In in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the SDM_LOW over IP
IP virtual-reassembly in
load-interval 30
automatic duplex
automatic speed
No cdp enable
No mop enabled
map SDM_CMAP_1 crypto
!
interface GigabitEthernet0/1
no ip address
load-interval 30
automatic duplex
automatic speed
!
interface GigabitEthernet0/1.10
encapsulation dot1Q 1 native
IP 192.168.10.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
property intellectual accounting-access violations
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1.100
encapsulation dot1Q 100
10.1.1.254 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1,200
encapsulation dot1Q 200
IP 10.1.2.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
local IP VPN_POOL_1 192.168.168.193 pool 192.168.168.254
IP forward-Protocol ND
!
IP http server
IP http authentication aaa-authentication of connection ADMIN_AUTHEN
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source map route ATT_NAT_LIST interface GigabitEthernet0/0 overload
IP nat inside source static tcp 192.168.10.10 25 expandable 25 76.W.E.R
IP nat inside source static tcp 192.168.10.10 80 76.W.E.R 80 extensible
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 443 443
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 987 987
IP route 0.0.0.0 0.0.0.0 76.W.E.F
!
ATT_Outside_In extended IP access list
permit tcp object-group ADMIN_HOSTS any eq 22
allow any host 76.W.E.R eq www tcp
allow any host 76.W.E.R eq 443 tcp
allow 987 tcp any host 76.W.E.R eq
allow any host 76.W.E.R eq tcp smtp
permit any any icmp echo response
allow icmp a whole
allow udp any any eq isakmp
allow an esp
allow a whole ahp
permit any any eq non500-isakmp udp
deny ip 10.0.0.0 0.255.255.255 everything
deny ip 172.16.0.0 0.15.255.255 all
deny ip 192.168.0.0 0.0.255.255 everything
deny ip 127.0.0.0 0.255.255.255 everything
refuse the ip 255.255.255.255 host everything
refuse the host ip 0.0.0.0 everything
NAT_LIST extended IP access list
IP 10.1.0.0 allow 0.0.255.255 everything
permit ip 192.168.10.0 0.0.0.255 any
deny ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
refuse the 10.1.1.0 ip 0.0.0.255 192.168.168.192 0.0.0.63
deny ip 10.1.2.0 0.0.0.255 192.168.168.192 0.0.0.63
client_vpn_traffic extended IP access list
permit ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
ip licensing 10.1.1.0 0.0.0.255 192.168.168.192 0.0.0.63
IP 10.1.2.0 allow 0.0.0.255 10.1.1.0 0.0.0.255
!
radius of the IP source-interface GigabitEthernet0/1.10
Logging trap errors
logging source hostname id
logging source-interface GigabitEthernet0/1.10
!
ATT_NAT_LIST allowed 20 route map
corresponds to the IP NAT_LIST
is the interface GigabitEthernet0/0
!
!
SNMP-server community [email protected] / * /! s RO
Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
Server enable SNMP traps vrrp
Server SNMP enable transceiver traps all the
Server enable SNMP traps ds1
Enable SNMP-Server intercepts the message-send-call failed remote server failure
Enable SNMP-Server intercepts ATS
Server enable SNMP traps eigrp
Server enable SNMP traps ospf-change of State
Enable SNMP-Server intercepts ospf errors
SNMP Server enable ospf retransmit traps
Server enable SNMP traps ospf lsa
Server enable SNMP traps ospf nssa-trans-changes state cisco-change specific
SNMP server activate interface specific cisco-ospf traps shamlink state change
SNMP Server enable neighbor traps cisco-specific ospf to the State shamlink change
Enable SNMP-Server intercepts specific to cisco ospf errors
SNMP server activate specific cisco ospf retransmit traps
Server enable SNMP traps ospf cisco specific lsa
SNMP server activate license traps
Server enable SNMP traps envmon
traps to enable SNMP-Server ethernet cfm cc mep-top low-mep Dispatcher loop config
Enable SNMP-Server intercepts ethernet cfm overlap missing mep mep-unknown service-up
Server enable SNMP traps auth framework sec-violation
Server enable SNMP traps c3g
entity-sensor threshold traps SNMP-server enable
Server enable SNMP traps adslline
Server enable SNMP traps vdsl2line
Server enable SNMP traps icsudsu
Server enable SNMP traps ISDN call-information
Server enable SNMP traps ISDN layer2
Server enable SNMP traps ISDN chan-not-available
Server enable SNMP traps ISDN ietf
Server enable SNMP traps ds0-busyout
Server enable SNMP traps ds1-loopback
SNMP-Server enable traps energywise
Server enable SNMP traps vstack
SNMP traps enable mac-notification server
Server enable SNMP traps bgp cbgp2
Enable SNMP-Server intercepts isis
Server enable SNMP traps ospfv3-change of State
Enable SNMP-Server intercepts ospfv3 errors
Server enable SNMP traps aaa_server
Server enable SNMP traps atm subif
Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
Server enable SNMP traps memory bufferpeak
Server enable SNMP traps cnpd
Server enable SNMP traps config-copy
config SNMP-server enable traps
Server enable SNMP traps config-ctid
entity of traps activate SNMP Server
Server enable SNMP traps fru-ctrl
SNMP traps-policy resources enable server
Server SNMP enable traps-Manager of event
Server enable SNMP traps frames multi-links bundle-incompatibility
SNMP traps-frame relay enable server
Server enable SNMP traps subif frame relay
Server enable SNMP traps hsrp
Server enable SNMP traps ipmulticast
Server enable SNMP traps msdp
Server enable SNMP traps mvpn
Server enable SNMP traps PNDH nhs
Server enable SNMP traps PNDH nhc
Server enable SNMP traps PNDH PSN
Server enable SNMP traps PNDH exceeded quota
Server enable SNMP traps pim neighbor-rp-mapping-change invalid-pim-message of change
Server enable SNMP traps pppoe
Enable SNMP-server holds the CPU threshold
SNMP Server enable rsvp traps
Server enable SNMP traps syslog
Server enable SNMP traps l2tun session
Server enable SNMP traps l2tun pseudowire status
Server enable SNMP traps vtp
Enable SNMP-Server intercepts waas
Server enable SNMP traps ipsla
Server enable SNMP traps bfd
Server enable SNMP traps gdoi gm-early-registration
Server enable SNMP traps gdoi full-save-gm
Server enable SNMP traps gdoi gm-re-register
Server enable SNMP traps gdoi gm - generate a new key-rcvd
Server enable SNMP traps gdoi gm - generate a new key-fail
Server enable SNMP traps gdoi ks - generate a new key-pushed
Enable SNMP traps gdoi gm-incomplete-cfg Server
Enable SNMP-Server intercepts gdoi ks-No.-rsa-keys
Server enable SNMP traps gdoi ks-new-registration
Server enable SNMP traps gdoi ks-reg-complete
Enable SNMP-Server Firewall state of traps
SNMP-Server enable traps ike policy add
Enable SNMP-Server intercepts removal of ike policy
Enable SNMP-Server intercepts start ike tunnel
Enable SNMP-Server intercepts stop ike tunnel
SNMP server activate ipsec cryptomap add traps
SNMP server activate ipsec cryptomap remove traps
SNMP server activate ipsec cryptomap attach traps
SNMP server activate ipsec cryptomap detach traps
Server SNMP traps enable ipsec tunnel beginning
SNMP-Server enable traps stop ipsec tunnel
Enable SNMP-server holds too many associations of ipsec security
Enable SNMP-Server intercepts alarm ethernet cfm
Enable SNMP-Server intercepts rf
Server enable SNMP traps vrfmib vrf - up low-vrf vnet-trunk-up low-trunk-vnet
Server RADIUS dead-criteria life 2
RADIUS-server host 192.168.10.10
Server RADIUS 2 timeout
Server RADIUS XXXXXXX key
!
!
!
control plan
!
!Line con 0
privilege level 15
connection of authentication radius_auth
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
privilege level 15
connection of authentication radius_auth
entry ssh transport
line vty 5 15
privilege level 15
connection of authentication radius_auth
entry ssh transport
!
Scheduler allocate 20000 1000
NTP-Calendar Update
Server NTP 192.168.10.10
NTP 64.250.229.100 Server
!
endRouter ipsec crypto #sh her
Interface: GigabitEthernet0/0
Tag crypto map: SDM_CMAP_1, local addr 76.W.E.Rprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.168.213/255.255.255.255/0/0)
current_peer 75.X.X.X port 2642
LICENCE, flags is {}
#pkts program: 1953, #pkts encrypt: 1953, #pkts digest: 1953
#pkts decaps: 1963, #pkts decrypt: 1963, #pkts check: 1963
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 76.W.E.R, remote Start crypto. : 75.X.X.X
Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
current outbound SPI: 0x5D423270 (1564619376)
PFS (Y/N): N, Diffie-Hellman group: noSAS of the esp on arrival:
SPI: 0x2A5177DD (709982173)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2115, flow_id: VPN:115 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301748/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x5D423270 (1564619376)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2116, flow_id: VPN:116 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301637/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)outgoing ah sas:
outgoing CFP sas:
Routing crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
76.W.E.R 75.X.X.X QM_IDLE 1055 ACTIVEIPv6 Crypto ISAKMP Security Association
In your acl, nat, you will need to refuse your VPN traffic before you allow the subnet at all. Just put all the declarations of refusal before the declarations of licence.
Sent by Cisco Support technique iPhone App
-
VPN connects but cannot ping or access resources
I hope this is an easy fix and it's something that I am missing. I've been looking at this for several hours.
Scenario:
I Anyconnect Essentials so I use the SSL connection
I changed my domain name and external IP in my setup, I write.
My VPN connection seems to work very well. In fact, I was able to connect to 3 locations with 3 different external IP address.
1 location, I get IP address 192.168.30.10, as it should. I can ping 192.168.1.1, but not the 192.168.1.6 which is my temporary resource, the firewall is disabled on 192.168.1.6.
2 location, I get an IP of 192.168.30.11, as it should. I was able to ping 192.168.30.10, could not sue 192.168.1.1 as the place closed.
Any help would be appreciated, it's getting late so I hope I gave enough details. I feel so close but yet so far.
See the ciscoasa # running
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 22.22.22.246 255.255.255.252
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS domain-lookup outside
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
ICMP-type of object-group ALLOWPING
echo ICMP-object
ICMP-object has exceeded the time
response to echo ICMP-object
Object-ICMP traceroute
Object-ICMP source-quench
ICMP-unreachable object
access-list 10 scope ip allow a whole
10 extended access-list allow icmp a whole
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.30.10 - 192.168.30.25 255.255.255.0 IP local pool SSLClientPoolNew
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 192.168.1.0 255.255.255.0
Route outside 0.0.0.0 0.0.0.0 22.22.22.245 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
network-acl 10
WebVPN
SVC request no svc default
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 8.8.8.8
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow inside
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
field default value mondomaine.fr
the address value SSLClientPoolNew pools
WebVPN
SVC Dungeon-Installer installed
time to generate a new key of SVC 180
SVC generate a new method ssl key
SVC value vpngina modules
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol webvpn
username test encrypted password privilege 15 xxxxxxxxxxxxxx
username ljb1 password encrypted xxxxxxxxxxxxxx
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:ed683c7f1b86066d1d8c4fff6b08c592
: end
Patrick,
'Re missing you the excemption NAT. Please add the following and try again:
access-list allowed sheep ip 192.168.1.0 255.255.255.0 192.168.30.0 255.255.255.0
NAT (inside) 0 access-list sheep
Let us know if you still have problems after that.
Raga
-
established - VPN connection, but cannot connect to the server?
vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4
Thank you
ASA Version 8.2 (1)
!
hostname ciscoasa5505
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.0.3 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 208.0.0.162 255.255.255.248
!
interface Vlan5
Shutdown
prior to interface Vlan1
nameif dmz
security-level 50
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS lookup field inside
DNS server-group DefaultDNS
192.168.0.4 server name
Server name 208.0.0.11
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service TS-780-tcp - udp
port-object eq 780
object-group service Graphon tcp - udp
port-object eq 491
Allworx-2088 udp service object-group
port-object eq 2088
object-group service allworx-15000 udp
15000 15511 object-port Beach
object-group service udp allworx-2088
port-object eq 2088
object-group service allworx-5060 udp
port-object eq sip
object-group service allworx-8081 tcp
EQ port 8081 object
object-group service web-allworx tcp
EQ object of port 8080
allworx udp service object-group
16001 16010 object-port Beach
object-group service allworx-udp
object-port range 16384-16393
object-group service remote tcp - udp
port-object eq 779
object-group service billing1 tcp - udp
EQ object of port 8080
object-group service billing-1521 tcp - udp
port-object eq 1521
object-group service billing-6233 tcp - udp
6233 6234 object-port Beach
object-group service billing2-3389 tcp - udp
EQ port 3389 object
object-group service olivia-3389 tcp - udp
EQ port 3389 object
object-group service olivia-777-tcp - udp
port-object eq 777
netgroup group of objects
network-object host 192.168.0.15
network-object host 192.168.0.4
object-group service allworx1 tcp - udp
8080 description
EQ object of port 8080
allworx_15000 udp service object-group
15000 15511 object-port Beach
allworx_16384 udp service object-group
object-port range 16384-16393
DM_INLINE_UDP_1 udp service object-group
purpose of group allworx_16384
object-port range 16384 16403
object-group service allworx-5061 udp
range of object-port 5061 5062
object-group service ananit tcp - udp
port-object eq 880
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389
outside_access_in list extended access permit tcp any host 208.0.0.164 eq https
outside_access_in list extended access permit tcp any host 208.0.0.164 eq www
outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field
outside_access_in list extended access permit tcp any host 208.0.0.162 eq www
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group
outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777
outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000
outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group
outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0
Ping list extended access permit icmp any any echo response
inside_access_in of access allowed any ip an extended list
permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
access-list 1 standard allow 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
logging buffered stored notifications
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool
192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 1 192.168.0.0 255.255.255.0
alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255
public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255
public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255
static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1
Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.255.0 inside
http 192.168.0.3 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt noproxyarp inside
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 108.0.0.97
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
peer set card crypto outside_map 20 69.0.0.54
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 1
life no
Telnet timeout 5
SSH timeout 5
Console timeout 0
identifying client DHCP-client interface dmz
dhcpd outside auto_config
!
dhcpd address 192.168.0.20 - 192.168.0.50 inside
dhcpd dns 192.168.0.4 208.0.0.11 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal group anyconnect strategy
attributes of the strategy group anyconnect
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
SVC request enable
encrypted olivia Zta1M8bCsJst9NAs password username
username of graciela CdnZ0hm9o72q6Ddj encrypted password
tunnel-group 69.0.0.54 type ipsec-l2l
IPSec-attributes tunnel-group 69.0.0.54
pre-shared-key *.
tunnel-group 108.0.0.97 type ipsec-l2l
IPSec-attributes tunnel-group 108.0.0.97
pre-shared-key *.
tunnel-group anyconnect type remote access
tunnel-group anyconnect General attributes
remote address pool
strategy-group-by default anyconnect
tunnel-group anyconnect webvpn-attributes
Group-alias anyconnect enable
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the icmp
!
service-policy-international policy global
: end
ASDM location 208.0.0.164 255.255.255.255 inside
ASDM location 192.168.0.15 255.255.255.255 inside
ASDM location 192.168.50.0 255.255.255.0 inside
ASDM location 192.168.1.0 255.255.255.0 inside
don't allow no asdm history
Right now your nat 0 (NAT exemption) follows the access list:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.
Then try to add an entry to the list of access as:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0
It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.
-
Client VPN connects but cannot ping all hosts
Here is the configuration of a PIX 501, which I want to accept connections from the VPN software clients. I can connect successfully to the PIX using the 5.0.0.7.0290 VPN client and I can ping the PIX to 192.168.5.1, but I can't ping or you connect to all hosts behind the PIX. Can someone tell me what Miss me in my setup?
Thanks for your help.
Chi - pix # sh conf
: Saved
: Written by enable_15 at 03:49:39.701 UTC Friday, January 1, 1993
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password
encrypted passwd
hostname chi - pix
.com domain name
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
list-access internet-traffic ip 192.168.5.0 allow 255.255.255.0 any
Allow Access-list allowed a whole icmp ping
access-list 101 permit ip 192.168.5.0 255.255.255.0 10.10.11.0 255.255.255.0
access-list 102 permit ip 192.168.5.0 255.255.255.0 10.10.11.0 255.255.255.0
pager lines 24
opening of session
debug logging in buffered memory
ICMP deny everything outside
Outside 1500 MTU
Within 1500 MTU
IP address outside pppoe setroute
IP address inside 192.168.5.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool ippool 10.10.11.1 - 10.10.11.254
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) - 0 102 access list
NAT (inside) 1 list-access internet-traffic 0 0
group-access allowed to ping in external interface
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac GvnPix-series
Crypto-map dynamic dynmap 10 GvnPix-set transform-set
toGvnPix 10 card crypto ipsec-isakmp dynamic dynmap
toGvnPix interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 0.0.0.0 netmask 0.0.0.0
ISAKMP keepalive 60
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 9
encryption of ISAKMP policy 9
ISAKMP policy 9 md5 hash
9 2 ISAKMP policy group
ISAKMP policy 9 life 86400
vpngroup address ippool pool chiclient
vpngroup dns 192.168.5.1 Server chiclient
vpngroup wins 192.168.5.1 chiclient-Server
vpngroup chiclient com default domain
vpngroup split tunnel 101 chiclient
vpngroup idle 1800 chiclient-time
vpngroup password chiclient *.
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
management-access inside
Console timeout 0
VPDN group chi request dialout pppoe
VPDN group chi net localname
VPDN group chi ppp authentication pap
VPDN username password net *.
dhcpd address 192.168.5.2 - 192.168.5.33 inside
dhcpd dns xx
dhcpd rental 86400
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 100
Cryptochecksum:
Chi - pix #.On the PIX configuration seems correct.
I guess you try to access hosts in 192.168.5.0/24, and these default hosts is the PIX inside interface 192.168.5.1?
How you try to access these internal hosts? If you try to ping the hosts, please please make sure there is no personal firewall enabled inside welcomes as personal firewall normally doesn't allow incoming connections from different subnet ip address.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are grayed out, it is a Windows component is missing and does not allow me to create VPN. I am running Windows XP Home addition. I recently got a Malware attack and had the quarantine and fix trojen attempts. After the restoration, I found that my previous VPN connection was broken. When I tried to add a new connection, I'm stuck on the screen connection virtual network in the the radial button private network connection wizard is grayed out, he could not check.
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows XP TechNet forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
-
I am trying to create a VPN connection, but it does not work
I am trying to create a VPN connection, but it does not work
The wizard cannot establish a connection. And if I try to record simply does not connect
It does not work. If I try to click on find the problem, there simply
do nothing.
I tried it on another pc, where it worked. So the problem is not the
router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.It does not create even a the connection icon
Thank youTry a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
I created a vpn connection, but can I create a shortcut to connect every time?
I created a vpn connection, but can I create a shortcut to connect every time?
I created a vpn connection, but can I create a shortcut to connect every time?
Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.
-
Hello
I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.
is hell config please kindly and I would like to know what might happen.
hostname horse
domain evergreen.com
activate 2KFQnbNIdI.2KYOU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
ins-guard
!
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
192.168.200.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_FREEMAN
nameif outside
security-level 0
IP 196.1.1.1 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_TIGHTMAN
nameif backup
security-level 0
IP 197.1.1.1 255.255.255.248
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa844-1 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS server-group DefaultDNS
domain green.com
network of the NETWORK_OBJ_192.168.2.0_25 object
Subnet 192.168.2.0 255.255.255.128
network of the NETWORK_OBJ_192.168.202.0_24 object
192.168.202.0 subnet 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
Access extensive list permits all ip a OUTSIDE_IN
gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
!
network obj_any object
dynamic NAT interface (inside, backup)
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10
Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
monitor SLA 100
type echo protocol ipIcmpEcho 212.58.244.71 interface outside
Timeout 3000
frequency 5
monitor als 100 calendar life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto backup_map interface card
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
!
track 10 rtr 100 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntunnel strategy
Group vpntunnel policy attributes
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntunnel_splitTunnelAcl
field default value green.com
internal vpntunnell group policy
attributes of the strategy of group vpntunnell
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl
field default value green.com
Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password
attributes of user name THE
VPN-group-policy gbnlvpn
tunnel-group vpntunnel type remote access
tunnel-group vpntunnel General attributes
address VPNPOOL pool
strategy-group-by default vpntunnel
tunnel-group vpntunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group vpntunnell remote access
tunnel-group vpntunnell General-attributes
address VPNPOOL2 pool
Group Policy - by default-vpntunnell
vpntunnell group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565
Hello
1 - Please run these commands:
"crypto isakmp nat-traversal 30.
"crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.
The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.
Please let me know.
Thank you.
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
VPN connects but no remote LAN access
Hello
I'll put up on a PIX 501 VPN remote access.
When I try to connect via VPN software, I am able to connect but I am unable to access LAN resources.
I have pasted below part of which seems relevant to my setup. I'm stuck on this issue, could someone help me? Thanks in advance.
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
test.local domain name
name 10.0.2.0 inside
name 10.0.2.13 MSExchange-en
2.2.2.2 the MSExchange-out nameoutside_access_in tcp allowed access list all gt 1023 host 2.2.2.2 eq smtp
outside_access_in list access permit tcp any host 2.2.2.2 eq https
outside_access_in list access permit tcp any host 2.2.2.2 eq www
inside_outbound_nat0_acl 10.0.2.0 ip access list allow 255.255.255.0 192.168.235.0 255.255.255.192
access-list 101 permit icmp any one3.3.3.3 exterior IP address 255.255.255.0
IP address inside 10.0.2.254 255.255.255.0
IP local pool vpn_pool 192.168.235.1 - 192.168.235.15
IP local pool vpn_pool_2 192.168.235.16 - 192.168.235.401 3.3.3.4 (outside) global
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside, outside) 2.2.2.2 10.0.2.13 netmask 255.255.255.255 1000 1000
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 3.3.3.1 1RADIUS Protocol RADIUS AAA server
AAA-server RADIUS (inside) host 10.0.2.3 * timeout 10
AAA-server local LOCAL ProtocolPermitted connection ipsec sysopt
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-MD5
map outside_map 90-isakmp ipsec crypto dynamic dynmap
card crypto outside_map the LOCAL RADIUS client authentication
outside_map interface card crypto outside
ISAKMP allows outside
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
vpngroup signal address vpn_pool pool
vpngroup dns-server 10.0.2.3 signal
vpngroup default-field test.local signal
vpngroup idle time 1800 signal
vpngroup max-time 14400 signal
signal vpngroup password *.
vpngroup TF vpn_pool_2 address pool
vpngroup dns-server 10.0.2.3 TF
TF vpngroup default-domain test.local
vpngroup TF 1800 idle time
vpngroup max-time 14400 TF
TF vpngroup password *.Kind regards
Joana
Very similar to the question of the configuration of the switch. You should check if there is no specific roads on the switch outside the default gateway. The switch should route the subnet pool ip to the firewall (10.0.2.254).
-
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
-
Client VPN connects but not internal LAN access or Ping
Hi all.
I'm new on this forum and kindly asking for your help because I'm stuck.
I have an ADSL router cisco 877 which I configured easy VPN server.
Now the Cisco VPN client ver 5.0 to connect successfully to the VPN server, but when you try to access/ping computers on the internal network, there is no response.The configuration is below. Please let know us where I was going or what I missed.
[code]Building configuration...
Current configuration: 4574 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$ $86dn J8HrK9kCQ8G9aPAm6xe4o1
enable password 7 13151601181B54382F
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login internal_affairs_vpn_1 local
AAA authorization exec default local
AAA authorization internal_affairs_vpn_group_1 LAN
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-2122144568
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2122144568
revocation checking no
rsakeypair TP-self-signed-2122144568
!
!
TP-self-signed-2122144568 crypto pki certificate chain
self-signed certificate 03
30820248 308201B 1 A0030201 02020103 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 32313232 31343435 6174652D 3638301E 170 3032 30333032 32303537
31375A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 31323231 65642D
34343536 3830819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100D3EA 07EC5D66 F4DD8ACC 5540BDBE 009B3C26 598EC99C D99D935A 51292F96
F495E5A9 8D012B0E 73EA7639 3B 586799 187993F5 ED9CA31C 788756DD 6BDB1B2B
4D7AA7F0 B07CF82F F2A29E86 E18B442C 550E22D2 E92D9914 105B7D59 253BBEA1
D84636B4 A4B4B300 7946CE84 E9A63D2E 7789B03A 6ADDB04E B21EC207 CCFEAE0B
30 HAS A 50203 010001, 3 1 130101 301B 0603 030101FF FF040530 0F060355 70306E30
551 1104 14301282 10494E54 45524E41 4C5F4146 46414952 53301F06 03551D 23
04183016 8014FA0F B3C9C651 7FD91EFA 3F63EAE8 6C83C80D 8AE2301D 0603551D
0E041604 14FA0FB3 C9C6517F D91EFA3F 63EAE86C 83C80D8A E2300D06 092A 8648
86F70D01 01040500 03818100 A1026DDC C91CAEB2 3C62AF92 D6B25EB2 CA 950, 920
313BCF26 4A35B039 A4F806A0 8CB54D11 6AF1ABAA A770604B 4403F345 0351361B
E2CF2950 26974F4A 95951862 401A4F76 C816590C 2FFCB115 9A8B3E96 4373FFE1
33D744F7 E0FDDE61 B5B48497 9516C3C6 A3157957 C621668E A83B5E33 2420F962
9142DD9E B6E9D74A 899A 9653
quit smoking
dot11 syslog
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 10.10.10.1
!
IP dhcp pool dhcplan
Network 10.0.0.0 255.0.0.0
DNS-server 196.0.50.50 81.199.21.94
default router 10.10.10.1
Rental 7
!
!
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
name of the IP-server 81.199.21.94
!
!
!
VPN username password 7 095A5E07
username fred privilege 15 password 7 1411000E08
username ciscovpn password 7 01100F175804101F2F
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group internal_affairs_vpn
key *.
DNS 196.0.50.50 81.199.21.94
pool ippool
ACL 108
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic internal_affairs_DYNMAP_1 10
Set transform-set RIGHT
market arriere-route
!
!
card crypto client internal_affairs_CMAP_1 of authentication list internal_affairs_vpn
card crypto isakmp authorization list internal_affairs_vpn_group_1 internal_affairs_CMAP_1
client configuration address card crypto internal_affairs_CMAP_1 answer
ipsec 10-isakmp crypto map internal_affairs_CMAP_1 Dynamics internal_affairs_DYNMAP_1
!
Archives
The config log
hidekeys
!
!
!
Bridge IRB
!
!
interface Loopback0
2.2.2.2 the IP 255.255.255.255
!
ATM0 interface
no ip address
ATM vc-per-vp 512
No atm ilmi-keepalive
PVC 0/32
aal5snap encapsulation
Protocol ip inarp
!
DSL-automatic operation mode
Bridge-Group 1
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description of the local lan interface
IP 10.10.10.1 255.0.0.0
IP nat inside
IP virtual-reassembly
!
interface BVI1
internet interface Description
IP 197.0.4.174 255.255.255.252
NAT outside IP
IP virtual-reassembly
internal_affairs_CMAP_1 card crypto
!
IP local pool ippool 192.168.192.1 192.168.192.200
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 196.0.4.173
!
IP http server
local IP http authentication
IP http secure server
IP nat inside source list interface BVI1 NAT overload
IP nat inside source static tcp 2.2.2.2 23 23 BVI1 interface
!
NAT extended IP access list
allow an ip
!
access-list 108 allow ip 10.0.0.0 0.255.255.255 192.168.192.0 0.0.0.255
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
password 7 0216054818115F3348
no activation of the modem
line to 0
line vty 0 4
password 7 06160E325F59590B01
!
max-task-time 5000 Planner
endSince this is a named ACL, you need to change ACL configuration mode:
NAT extended IP access list
Then, make the changes.
Federico.
Maybe you are looking for
-
Work with the development of encryption. In order to insert a few bars I need to divide and move a section. When I move the section only Automation data moving with but not the time signature... big problem. How to solve this problem?
-
Compatibility of SSDS on IdeaPad laptops
Hello There are a few posts on the SSD, but none that has answered my question and proposed general guidelines. That is why this thread. 1.) How determine if their laptop model is compatible with a particular SSD? 2.) I have an Ideapad y560p and I wa
-
the pop3 host is not found, error0x800cccod
window Live messenger.problem send mail - the pop3could host not found b.e, error ox800cccod. Help
-
I want to change my password
-
Defender fails to start with error 0x800106ba after application Vist SP 1
I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?