URL blocking

Similar Questions

• Get messages "Malicious URL blocked" avast all few seconds

  I have Vista Home Premium, 32-bit, Service Pack 2.   Since last week, I get the message from Avast: 'Malicious blocked URL' popping up every few seconds.  2 Commons are "hxxp://oldschoolzz.ocm/x/" and "hxxp://newgenerationp.com/x/".  I ran all the scans of security of Microsoft, Avast, Malware Bytes, somethng called aswMBR and divert it.  I also did some scans boot. I ran newspapers of them and so far support Avast tells me that they can't find any virus or infections.  There were moments where I scan and horses Trojan or register of items here.  Can I remove them, but right now when I reboot, I get these pop - upd again.  I've also restored to a point before this happened, but it does not solve either.  Sometimes it comes even to the top when I'm not on the internet.  Any other suggestions besides reinstalling Vista: (.)  Any other suggestions.  Please let me know if you need other information.  Thanks for any help!

  Malware blocked URL pop up by Avast seems to be a problem these days with many of those who use Avast.

  More online forums are flooded with questions about this mysterious pop-up.

  It is a virus or a false positive alarm by Avast?

  A glitch Avast?

  If virus why it not detected by antivirus/anti- malware programs?

  Why the Avast is so quiet about it?
  http://www.bleepingcomputer.com/forums/topic456361.html

  http://www.google.com/search?q=%22Malicious+URL+Blocked%22&sourceid=ie7&rls=com.microsoft: en - us: ContextMenu IE & oe and ie ==.

  UTC/GMT is 20:22 Saturday 16 June 2012

• Restrictions on access to URL blocking works not

  Hi, I have a WRT610N router, I am using for well over a year.  I tried to add URL, blocking access Restrictions screen and it doesn't work, no matter what I try.  For example, I entered just www.yahoo.com, yahoo.com and yahoo, but the router allows me to access the site Web of Yahoo.  I tried to get yahoo under the keyword blocking, but the router always allow access.

  The political deadlock is disables and there is no time to only selected day restrictions either.

  I've updated the firmware today (1.00.03 B15), restarted the modem and still no change in the deadlock.  Any thoughts?

  When you enter the Access Restriction, it of like the implementation of the restriction on the MAC address or IP in the list. First of all, you must enter the IP address range that you want to restrict. So take care to select Deny. All day must be selected if you want to restrict all the time. Finally, the the URL or keyword. Don't forget to save him.

• URL blocked e-mail

  Hello, the message below is from ESET security. They suggested that contact you about this. Also, I have a screenshot of the error message, but did not know how to send it. I don't know what additional information you might need, so please let me know if you need anything that anyone else.

  ESET:
  "It was a pleasure to speak with you today. As we, we recommend you to get in touch with Firefox for a solution on phishing attacks that occur. Currently ESET blocks these attacks happen. When you submit your ticket, you can let them know that your anti-virus is blocking from Firefox phishing attacks and you have a screenshot of the URL address. "

  09/12/2013-11:50:48 http://espn-assets.ff0000-cdn.net/crossdomain.xml blocked by the black list of the Anti-Phishing C:\Program Files (x 86) \Mozilla Firefox\firefox.exe MikeMavis-PC\MikeMavis

  Thank you
  Mike Mavis

  You visit the ESPN site?

  crossdomain files. XML are usually required by the Flash plugin, and in this case, it is located on a CA server that distributes content to the ESPN site.

  • View-source:http://espn-assets.ff0000-cdn.net/crossdomain.xml

  <?xml version="1.0"?>
  <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
  <cross-domain-policy>
  	<allow-access-from domain="*" secure="false"/>
  </cross-domain-policy>

  So there's probably no need to block this file, otherwise content Flash probably will not work correctly.

• I get a "MALICIOUS URL BLOCKED" message when you connect to gmail or iGoogle home page, ONLY WITH FIREFOX (not with Internet Explorer). Help!

  For the past two weeks, whenever I connect to gmail or iGoogle home page I get a message from avast! Antivirus (free version) saying that it has detected a malicious site. This only happens when using Firefox. No message is displayed if I connect using Internet Explorer 8. I use Windows XP Pro Service Pack 3, avast! Version 6.0.1367 (updated daily), Mozilla Firefox 10.0. I also use Malware Anti-Malware and SUPER Anti Spyware, bytes that are also updated regularly. The only recent downloads in my system were version 10.0 of Firefox and Microsoft Updates. I even tried to roll back to version 9, no change or improvement. This is the URL that is blocked, as shown in the pop-up message: OBJECT: http://74.50.117.107/js/je.php?u=739ec4a2-4903-4c0d-aee6-bdb3d2cdb87c & a = 200 & i = 111 & s = 0 INFECTION: PROCESS URL: MAL: C:\Program Files\Mozilla Firefox\firefox.exe. What worries me, because it barely resembles the horizon, and I do not use IE, it is slower and does not include Ad Block, which I use a lot (apart from the fact that Microsoft is trying to push me to buy Windows 7 * IE9 does not work with XP *, which would require the upgrade my computer and for the moment there is no budget available.). I thank in advance for the help, you can send my way.

  Follow the suggestions mentioned in the following articles:

  • Clear the Cache and Cookies
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Check and tell if its working.

  May not be related to your problem, but some of your Firefox Plugins are out of date

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• FF 4.0 statusbar popup url blocking my link

  Regularly, I can't click a link at the bottom of the screen because the new URL in popup statusbar block my mouse pointer. Usually the URL moves out of the way, but this does not always happen.

  I work with Oracle application express, this tool has a line of links at the bottom of the screen, and this happens very often.

  The easiest way is to use the add-on of status-4-Evar. With it, you can choose to not display the messages of State or URL links, or rather display them in the bar modules or the address bar.

  https://addons.Mozilla.org/firefox/addon/status-4-EVAR

• Firefox stops allowing me to enter my URL once I get the first character. I have to re - click in the URL block to continue.

  When I click to enter my URL request, only you can enter a character before that Firefox leaves this block. When I click on new, I can continue to enter my information. This happens every time. Same thing is happening in the Yahoo or Kiwee Toolbar.

  This has happened

  Each time Firefox opened

  == I installed Firefox

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• a url blocking

  How can I block one or two specific URL
  Mac OS 10.10.5, safari 9.0.3.
  Thank you

  Here's a possible solution. http://www.WikiHow.com/block-a-website-in-Safari

  TT2

• Power of fire-URL blocking - how to see the hosts?

  Hello

  I work with the implementation of a system of firepower on an ASA5525X. I activated the blocking of certain categories of URL, it works fine and I can see that a number of classes of forbiddel connections is arrested. But how it go down and see what internal hosts attempt to access the URL forbiddel? Standard reports or dashboards that gives this information?

  Kind regards

  Thor-Egil

  Hello, what are you using for the configuration of the module of firepower? ASDM or firepower Management Center (FMC)? In WCF, you can get detailed information about each transaction in the tab analysis-> connection-> events. Please, see the attachment.

  But first, you must configure journaling in access policies.

• Firesight URL filtering - shows do not block page for https sites

  Hi all

  I configured to block certain pages of URL filtering. I configured the decrypting ssl as well. But I noticed that when a website https is blocked firesight does not display the block page. When the Web http site is blocked the block page shows correctly. Is this a limitation in the firesight?. The firesight version is 6.0.

  Thanks in advance

  Ophelia

  SSL web filtering occurs with the common name of the server certificate. When the end user opens any SSL-based Web site. End system not the TCP connection with the server and then SSL handshake begins.

  The probe monitors the SSL handshake and when the server sends the server certificate. Sensor corresponds to the common name of the certificate with the access rule (rules based on a URL). If it matches the sensor blocks the connection during the SSL handshake. Therefore, the connection has been blocked before reaching the application protocol (HTTP GET request) so that the system doesn't send any response page.

  The sensor not the resignation certificate (SSL decryption) when it receives the certificate of the server, but at the same time / name common package (server certificate) corresponds to the access rule (URL blocking) to block the connection. Therefore, blocking connection has occurred then the SSL decryption is not the case. In this way, the system can save some resources (CPU / memory).

  Kind regards

  Sunil Kumar

  Rate if that helps!

• Blocking of URLS prefixed with-RV220W (answered)

  All WEB sites, we have an obligation to block in a given country. It is possible to use URL blocking to block all WEB sites ending in .xy where xy is the country to block. It seems that the router does not take account of the '.' and block all URLS that have xy anywhere within them.

  Thank you

  David

  * I forgot to specify the model of router - it is RV220W running latest firmware - 1.04.17

  Hi David I m glad you found this useful answer, it would be a good idea a filter such as

  * Please rate the Post so other will know when an answer has been found.

  Concerning

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.

• Block URLs and instant messaging applications

  Hello

  I'm on a UC540 that I installed the customer of the United Nations and it would like to be able to block access a certain web sites and instant messaging applications type live Messenger.

  I think pour ca url blocking should happen at the level of the ACl but is not at all an expert I don't know she procedure put in place to achieve this. Idem pour applications.

  I saw that by switching the FW from one level to the other, it blocks certain services or not but I do not know what create or modifier.

  If someone has an idea, I want although it me informed because I think that this is a request that is not unique, and so I will have to reproduce on other facilities.

  Thanks in advance,

  Roman

  Hello Romain,.

  Yes, url filtering is not available in the UC. However it is available the of SR520 and with VAC.

  Hervé

• WRT160Nv3 problem with blocking traffic through Access Restrictions

  Hello.

  I want something very simple. Block Youtube. I go in "Access Restrictions", choose a name for the policy 1, turn it on, choose the pc in the list of pc, but then...

  If a click Deny, all other options will be disabled (grayed out, do not click or write on them).

  Therefore, I can't put the URL I want (youtube).

  I tried to write the url with "allow" and then change to 'decline', but it crashes ALL the traffic.

  Not good.

  So, how can I make a new policy just to block this URL?

  Is it normal that when I click and choose "Refuse" all is disabled afterwards?

  Thanks in advance.

  Kind regards

  Leo

  for the internet access policy DENY wants to restrict internet access for hours and days specified. This may block ALL internet traffic to the said Annex. Web site blocking of URLS, blocking by keyword and the applications would then NOT AVAILABLE as long as the computers would have access to internet at first if you have such a policy is disabled.

  for your case, you can try to turn on the restriction of access to the internet to ALLOW then specify youtube.com under website by URL blocking. This would have internet access all the time (if you have the DAILY deadline), computers or during certain days and hours but do NOT have access to youtube.

• Can not type 'url-list' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

  Here is example of Cisco:

  WebVPN
  allow outside
   list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
   list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
   list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

  Here's my ASA:

  VPNFW-70/PRI/Act(config-WebVPN) # url -?

  set up the mode commands/options:
  URL-block url-url-cache server

  My ASA has no choice of the list of URLs when you type '?

  Can anyone give me some suggestions? Thank you.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Hello

  In the 7.x code all customizations without client was included in the running configuration.
  However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

  The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

  Why we can not create bookmarks CLI?

  With the introduction of 8.x many more options have been added, allowing greater flexibility.  These new options would make the running configuration passes, so they were moved into separate xml files.  Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

  For more information on this discussion, please refer to this thread: -.
  https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• SCC module and URL filtering

  Hi all

  I configured the firewall and it works perfectly.

  I configured Module CSC also for URL blocking. It is perfectly blocks configured sites. Now a new requirement araised. This URL blocking should be configured to block sites based on the user name / password. He has for example user1 blocking certain sites. User2 to block all other sites. I am

  Cannot find the menus in this regard.

  Help me with that.

  Still, I don't think it is possible to filter using username predifined, see this thread response, seems to be in the works... u may want to check with your cisco account representative to know for sure when this will be available if so.

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=expert%20Archive&topic=security&TopicId=.ee7f99a&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc23f5c/20