URL for access without client on SAA

Similar Questions

• Adding RDP to access without client

  Need information about the addition of plug-in for VPN users without RDP client.  I would like to send users to Tem-network server only.  Device is windows server 2012.

  Hello

  Here you have the documentation that will help you in this implementation:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  I hope you find it useful, please note!

• OS for vCenter. Should I for windows server client access licenses?

  Hello

  I just buy more Essentials and installing vCenter. A Microsoft guy told me except the license server should I buy Windows client access licenses to the server also. To me, this seems odd. Is this true? Is there a document indicating I need / not need client access licenses?

  Thanks in advance!

  Long story short: you need a CAL for each device / user that will access the VirtualCenter machine (Windows server).

  Quote: Each user or device that accesses or uses the Windows Server 2008 or Windows Server 2008 R2 server software requires the purchase of a license for access to Client in Windows Server 2008 (Windows Server CAL)

  Add as follows: (assuming you are installing vCenter on W2008) http://www.microsoft.com/windowsserver2008/en/us/client-licensing.aspx

  If you already Win servers in your environment and your users / devices already have win client access licenses server, you can use the existing licenses to stay in the EULA. Talk to your MS guy if that's the case.

  WBR

  Imants

• Disable without client/browser based VPN.

  Guy of HU,

  I want to disable VPN access without client in our ASA.

  I saw this configuration in ASA:

  WebVPN
  allow outside
  allow inside
  AnyConnect essentials
  SVC disk0:/anyconnect-win-3.1.01065-k9.pkg 1 image
  SVC disk0:/anyconnect-linux-2.4.0202-k9.pkg 2 image
  Picture disk0:/anyconnect-macosx-i386-2.4.0202-k9.pkg 3 SVC
  enable SVC
  tunnel-group-list activate

  I disabled the Webvpn with the command "No webvpn. But it looks like that it deactivated the VPN access without customer and with the customer.

  Can someone help me with this please?

  FC

  Hello

  By default, you would not be able to access without VPN client anyconnect essential you've enabled in config.

  So if you need to disable webvpn access you allow only ssl-client protocol under config group policy.

  Discover this config:

  ASA - SSLVPN (config) # group - polished

  In-house strategy group SSLVPN_ASA ASA - SSLVPN (config) #.

  Attributes of SSLVPN_ASA strategy group ASA-SSLVPN (config) #.

  Split-tunnel-policy tunnelspecified ASA - SSLVPN (config - Group - Policy) #.

  Value of split-tunnel-network-list ASA - SSLVPN (config - Group - Policy) # SPLIT_TUNNEL

  ASA - SSLVPN(config-Group-Policy) # Protocol vpn tunnel?

  orders/options mode group policy:

  IKEv1 IKE version 1

  IKEv2 IKE version 2

  L2TP ipsec L2TP with IPSec for security

  SSL-client SSL VPN Client

  SSL-clientless clientless SSL VPN

  ASA - SSLVPN(config-Group-Policy) # tunnel - vpn-client-ssl Protocol

  But since you have anyconnect essentials enabled in config webvpn you would have no access to clientless VPN.

  He only let you to access the services of the Anyconnect client.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Can not type 'url-list' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

  Here is example of Cisco:

  WebVPN
  allow outside
   list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
   list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
   list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

  Here's my ASA:

  VPNFW-70/PRI/Act(config-WebVPN) # url -?

  set up the mode commands/options:
  URL-block url-url-cache server

  My ASA has no choice of the list of URLs when you type '?

  Can anyone give me some suggestions? Thank you.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Hello

  In the 7.x code all customizations without client was included in the running configuration.
  However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

  The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

  Why we can not create bookmarks CLI?

  With the introduction of 8.x many more options have been added, allowing greater flexibility.  These new options would make the running configuration passes, so they were moved into separate xml files.  Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

  For more information on this discussion, please refer to this thread: -.
  https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• ASA 5510 worm. 8.2 (5) access through VPN without client management?

  Hi all

  I am completely new to networking Cisco and virtual private networks, I'm working on to the ASA 5510 8.2 (5) 46.  Currently, the unit is set up very very little.  Access to the administration are accessible from my home network to 192.168.2.1.  I'm trying to enable management access remotely by VPN.  I created a clientless SSL VPN, which, during the wizard process, access to the specified administration was the/admin adding to the VPN https url.  Add the/admin in the url for VPN is not me the VPN connection, and by using the/admin url from the portal returns a message "not available".  Also, from the portal I can't access the ASDM using inside IP network management, it also returns the message as "unavailable".  Again, I'm new to this, any help would be greatly appreciated.  Here is my config.  and thank you!

  : Saved : ASA Version 8.2(5)46 ! hostname ALP5510 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address 99.66.203.148 255.255.255.248 ! interface Ethernet0/1 shutdown no nameif no security-level no ip address ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 nameif inside security-level 100 ip address 192.168.2.1 255.255.255.0 ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! boot system disk0:/asa825-46-k8.bin ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 68.94.156.1 name-server 68.94.157.1 same-security-traffic permit inter-interface pager lines 24 logging asdm informational mtu outside 1500 mtu inside 1500 mtu management 1500 ip local pool vpn 192.168.2.10 no failover icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-714.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 101 0.0.0.0 0.0.0.0 nat (management) 101 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 99.66.203.150 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http server session-timeout 20 http 192.168.1.0 255.255.255.0 management http 192.168.2.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.2.0 255.255.255.0 inside ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.2.3-192.168.2.10 inside dhcpd dns 68.94.156.1 68.94.157.1 interface inside dhcpd enable inside ! dhcpd address 192.168.1.3-192.168.1.10 management dhcpd dns 68.94.156.1 68.94.157.1 interface management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside enable inside group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn webvpn   svc ask enable group-policy eng internal group-policy eng attributes vpn-tunnel-protocol webvpn webvpn   url-list value EngineerBookmarks username user1 password mbO2jYs13AXlIAGa encrypted privilege 15 username user1 attributes vpn-group-policy eng webvpn   url-list value EngineerBookmarks tunnel-group test type remote-access tunnel-group test general-attributes address-pool vpn tunnel-group Engineering type remote-access tunnel-group Engineering general-attributes default-group-policy eng ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:05f3afe3383542c8f62b1873421a7484 : end asdm image disk0:/asdm-714.bin asdm location 99.66.203.150 255.255.255.255 inside no asdm history enable 
  
  
  			 
  I'm TAC if you give me a number I can help you, I think we will extend that if we continue on the support forum
  		   

• What is registration (URL to access the connection) for catalyst Partner Portal?

  What is registration (URL to access the connection) for catalyst Partner Portal?

  http://www.BusinessCatalyst.com/Admin/index.aspx?to=PartnerPortal

• By the way the item values without using the URL for it

  Hello

  I want the value of an element to another page.

  Is there a good tutorials on it? I don't want to use the URL for it, if you understand what I mean.

  Also I would like to learn more about session state in the apex and how it works and how I could display a value of an element stored in the session state. So if you have some good reads on that I would appreciate it.

  d6752e93-BC8D-48f1-b3ef-073ab316b748 wrote:

  Update your profile with a readable handle.

  Also, how do I acsess an element that was previously presented on a page.

  A value of element are accessible anywhere in the APEX using the syntax of reference described in the documentation appropriate session state. The required syntax depends on where the item is referenced. In general, use bind value [: MY_ITEM] syntax in queries SQL for APEX and PL/SQL expressions and blocks; the functions V and NV [V ('MY_ITEM')] in stored program units; and the substitutions of static text [& MY_ITEM.] in the properties of code, templates and HTML component. The actual value returned will depend on where the item is referenced in the APEX show/accept treatment.

  For example that I want to fill a text field empty with a value of an element that has been filled with front page.

  What do you mean by "an element that was filled in front page? Before what? By the presentation of previous page? On the same page layout or a different page?

  Please try to make your questions more clear: How to ask questions

• Cannot type 'functions' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'function', I can't enter. Can anyone give me some suggestions? Thank you.

  internal GroupPolicy1 group strategy
  attributes of Group Policy GroupPolicy1
  Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
  WebVPN
    functions entry url file-access file-exploration of the mapi port forward files filter entry
  HTTP-proxy download automatic citrix

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  ASA-recent versions, it is configured without the keyword "functions":

   asa(config-group-policy)# webvpn asa(config-group-webvpn)# ? Group-policy WebVPN commands: ... file-browsing Allow browsing for file servers and shares file-entry Allow user entry of file server names to access filter Configure the name of the webtype access-list ... port-forward Configure the name of the Port Forwarding applet and auto-download options ... url-entry Control the ability of the user to enter any HTTP/HTTPS URL url-list Configure a list of WebVPN servers/URLs

• Configure ASA5055 as a remote access VPN client

  Hello world

  I'm trying to configure a 5505 as a remote access VPN client. I have several old hubs VPN 3002, but in the new sites I'll use a 5505 instead of these 3002.

  I think that the configuration is very simple. I have the IP address of the peer (remote server), I know it is an IPsec tunnel without certificate and I have passwords and user name and group.

  How can I translate this configuration for an ASA5505? I have attached a screenshot.

  Here ya go:

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/configuration/guide/ezvpn505.html

  Federico.

• AnyConnect and SSL - VPN without client

  Are there problems in running Cisco AnyConnect and SSL - VPN without client side by side?

  I am currently looking into adding features for an ASA AnyConnect who currently set up to operate without SSL - VPN client. The system without client is not removed. I don't know how to set it up, I wonder if someone has already set up this or if there is no problem with this Setup?

  Hi Daniel

  It's a little complicated if you want a granular authentication and authorization, but it works.

  I'm running an ASA with IPSec, SSL Client and clientless SSL.

  Each of these virtual private networks with user/one-time-password name and certificate based authentic.

  The main challenge is to put in place its own structure of profile cards, connection profiles, group policies and dynamic access policies.

  Feel free to ask questions...

  Stephan

• CSD before logon with VPN policy without client check

  I'm testing the CSD before political logon controls while I use the VPN without client. I found that if java is not detected then I will this information, "Weblaunch for Cisco Secure Desktop has failed. If you want to manually start the Cisco Secure Desktop, you can download a native Cisco Secure Desktop Launcher. »

  But underneath, I also see "or log in using the link below (some resources may not be available):
  Login»

  This means that I can bypass the verification before opening of political of CSD session if JAVA is not installed.

  Is this good? or I do not miss anything?

  You can use Dynamic Access policies (RAP) to perform additional checks. These controls to use CSD and if CDD is not running (or bypass) the DfltAccessPolicy is applied. You can set it to terminate the connection and display a message to the user. Before the DfltAccessPolicy you must have a permissive policy where check you something that is always true (e.g. the all kinds of operating systems) and the value of the action to continue.

  If you do not have only clientless connections additional tuning may be necessary.

  Update:

  A good docs on the verification of existence of CSD:

  https://supportforums.Cisco.com/docs/doc-8283

• What permissions are required for access to VMware Workstation?

  I need to provide access to a few virtual machines in our environment vSphere for a user through VMware Workstation 9.0.2 but questions.

  There are 3 virtual machines in a folder under models and virtual computers that this user needs access base (start, stop, console). I first tried assigning the role of user (sample) of the virtual machine to the user on the folder that contains these VMs (with spread), but trying to access one of them workstation as long as this user, I get the error was refused permission to perform this operation. I even tried to assign the role of administrator for this user on this issue and received the same error.

  Then, I assigned the user (sample) of the virtual machine and then later the role of the administrator directly to the virtual machines, but when you try to connect through my computer I get this error with or the other role (I have attached the log file, it refers):

  

  After clicking on OK, workstation breaks down, and then I get this error:

  

  The only way I could successfully get this user access is by adding the user to the local Administrators group vCenter Server, but after doing this, the user has full access to all virtual machines. I should also mention that Im able to access the virtual machine with the basic functions assigned via vSphere client to web without problem with permissions above affected as this user.

  Does anyone know what is required to provide access by workstation I'm looking for?

  Thank you!

  Figured it out!

  First, for each virtual machine that you want to grant access, to add the user/group with the assigned role, you want to give them. An additional step required for access to the workstation is, for each host you granted access to the virtual machines are on, you must also add the user/group and assign the read-only role, making sure to uncheck propagate to child objects.

  So it's similar to the thread above, but avoids having to explicitly revoke access to each another VM on the host. So now, when I log in as a user with that I was testing, I can connect to vCenter via my computer, only to see the VMs Ive applied custom roles to and, especially, can connect to them without problem!

  Also, it seems that even if work stations invite you to assign read-only permissions to the host is not actually do something.

  Thanks a bunch for all the help everyone... especially ShadyMalatawey. If I would not have seen this prompt in my computer to apply the permission he would have had much more time to understand.

• Generate url for virtual machine installed on vmware server console programmatically

  Hello

  I want to generate URLs for machine vmware console located on vmware server. Are there examples of available in c# code? Any help will be really good.

  Thank you.

  Hello

  There are already several posts/Articles on this subject. What works for ESX should work for VMware Server. The misfortune is that it should be avoided for several reasons:

  (1) there are only a limited number of "consoles" allowed for a given server of VMware

  (2) RDP/VNC is a tool much better for this as there are no such limits

  (3) the security of this method is somewhat limited

  (4) more than one user can access the same VM without protection of the user (essentially a struggle for control)

  So in general, it is best to RDP/VNC in the virtual machine is to use the console.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• 'File name' is locked for editing by 'Client', why not show the correct user account

  A .xls file created by MS Excel 2003 and saved on the server files (Windows Server 2008 R2 without Service Pack).

  We have two users: A and c. accounts of A and C join same above file server's domain. A approval of the admin on the server, C is a common user. The version of MS Excel on the pc is 2010, although it is 2003 for C.

  C tries to open a file on the server and it has the change permission on the file and the file, however, the file is locked for editing by 'administrator '. For the moment, no one opens this file, so which is 'Administrator'?

  More tests:

  (1) once A open file C is reached, there is message: file is locked for editing by 'Client', so why shows 'Client' instead of a correct domain account?

  (2) after C opens the file and then A is reached, there is message: file is locked for a domain C user account. So it seems OK.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/