URL-Windows internet Explorer. Error message when tryng to click on (this link to a friend by e-mail)

Similar Questions

• Windows Internet Explorer error message

  Connecting to IE a Web site can take 10 or more minutes to load and I often get the message "cannot find ' misp://SecurityScanner.dll:exit.htm / '.»  Make sure the path or internet address is correct.

  This is my first time trying to find an answer on my own.  If this isn't the appropriate place I would really appreciate it if someone could tell me or direct me elsewhere.

  Connecting to IE a Web site can take 10 or more minutes to load and I often get the message "cannot find ' misp://SecurityScanner.dll:exit.htm / '.»  Make sure the path or internet address is correct.

  This is my first time trying to find an answer on my own.  If this isn't the appropriate place I would really appreciate it if someone could tell me or direct me elsewhere.

  The SecurityScanner.dll belongs to your McAfee security program. Apparently, you have this feature set to run and McAfee is damaged. I suggest that you uninstall McAfee and replace with a better antivirus such as NOD32 (commercial), Avast and MS Security Essentials if you need a free.

  You should also be proactive and scan your computer for viruses/malware because the infection can break the antivirus programs.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• Get the "No. Internet Connection" error message when accessing Flipshare

  Original title: Flipshare / Windows 8

  Hello!

  If I want to go on the site 'Flip' and 'support' or 'registration', I got the message that I have not internetconnecting.

  I had this "problem" since I got my new computer with Windows 8, I used to have a computer with Windows XP, I had no problem then.

  Because of this problem, I can't go to the website of Flipshare.

  Who can 'help me '?

  Thanks in advance.

  Evie Badenbroek

  Hello Evie,

  1. the problem persists with a particular Web site?

  2. What is the exact error message you get?

  3. do you use Internet Explorer to visit Web sites?

  Internet connection issues are more often caused by cables disconnected or routers and modems that do not work correctly.

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  Answer please if you have any questions.

• Internet Explorer error message

  I used to have a toolbar of Eve coupon installed in my IE toolbar. Recently, I did a system restore to an earlier date. Now, whenever I open IE, I get an IE error can NOT FIND. I try to shut it down and it goes to a blank page. Here's what it reads;

  INTERNET EXPLORER

  IMPOSSIBLE TO FIND

  ProgramData/AOL%20Toolbar/ieToolbar/resources

  Make sure the path or Internetaddress is correct.

  
  Help!

  Hello

  Prpbably you had installed before AOL toolbar. Please reinstall it from the following link:

  http://toolbar.AOL.com/AOL/download.html

  Kind regards.

• Hi I keep getting a "Host_EvaluationFail" error message when I double-click the downloaded installation file.  No idea what this means?

  I try to download the free 30 day trial of the DC Adobe Acrobat.   During this installation, I received the message "Host_EvaluationFail".  Any ideas what this means or how to fix?

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• Report - Warning Message When the user clicks on the link with the value 0

  Hello
  
  I have a report with several areas, for example. Year, high priority project manager, County of medium priority project, project manager of low priority.
  I used column attributes to bind the data of the report on page 22.
  
  
  
  Now, some cells in the report have 0. Isn't it possible that when the user clicks on 0 binding doesn't to page 22, but see the window alert javascript indicating no data.
  
  
  Any help will be much appreciated.
  
  
  Kind regards
  Shijesh

  You can take a look at the following page

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:228

  to see how this is possible.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• I get constant error messages when you try to download a link to follow and send

  I use 10 64-bit windows and all my stuff adobe is 2015 CC please help

  I don't understand... WHAT download to the place WHERE?

  In addition, exactly what program do you use?

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Windows Explorer has stopped working error message when I access my folder of snaps

  Window #1:

  Explorer Windows has stopped working.

  Windows is looking for a solution.

  Option: Cancel box

  Window #2:

  Explorer Windows restarts.

  Option: Cancel box

  Come this error message when I try to access my folder only snaps.

  Please help me.

  Hello

  A few questions will help us better to solve your problem. Please answer these questions for us:

  1. what operating system do you use?

  2. what programs you have problems with?

  3. is there an error message generated?

  4. what type of file you go when this happens?

  5 How long this issue is past?

  6. is there anything changed/added/deleted before this issue popped up?

  It's basically the who, what, when, where and why of troubleshooting.

  Eddie B.

• IM using Windows Vista Aero and when I right click Desktop Properties then personalization and appearance I get and error "windows internet explore has stopped working" Please help.

  Ive had this problem for a while now... imnew for vista because it's a new computer.

  I've sorted it but I'm not sure how and now the problem is back.

  When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.

  Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...

  some can help me please.

  Sally.

  Hello

  Sorry we don't communicate via this forum.

  You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
  on the computer or just their toolbar in Internet Explorer?

  -------------------------------------------------

  If there is no antivirus on the computer here is what I use and recommend (except for one
  program like Prevx, you don't want more than one antivirus on the computer program
  much less running because they interfere with each other and lower security). Each combination
  of her below you will warn of malware without toolbar from PCtools running online.

  Here's what I use and recommend: (these are alll free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Backup of images in the error message: "Windows Internet Explorer: an attempt was made to load a program with an incorrect format.

  When you try to record images to the picture library, I get the message: "" Windows Internet Explorer: an attempt was made to load a program with an incorrect format. ""  I was able to record images before now without any problem.  Thank you!

  I tried your suggestions, but none seemed to fix my problems.  I was advised to remove the picture library, and then restore that brought me success.  Thanks for having me on the right path.

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• I get the empty error message when clicking on "send & receive in Windows Mail.

  Original title: I receive a blank error message when you click "Send & Recieve" in Windows Mail.

  I recently asked a question in the Microsoft answer that I could access Internet Forum is no longer my favorites to Internet Explorer 8 (although they were always on display in the folder My Favorites in my user account folder.)  Several fixes to this problem have been proposed, but the one that worked was when it was suggested that I might have a corrupted user account.  I was directed to Microsoft link "How to fix a corrupted user profile." I followed the instructions and created a new user account and copied the files to the new account. Was done to correct the problem, and now I can access all my favorites still in IE8 in the new user account.

  However. I am now no longer able to send or receive messages in Windows Mail. When I click on "Send & receive" I get the box that says "some errors occurred while processing tasks requested. Please see the list of errors below for more details. "However, the box below which is supposed to list the errors is completely empty. I contacted my ISP (Virgin Media) provider, who did various diagnostic tests. They told me that this isn't a problem with their security, and they checked my account settings to make sure that everything is correct. They seem to think that this could be a problem with my registry. They sent several messages test (arriving in my web Virgin Media mail box), but for some reason are not getting downloaded in my Windows Mail. On a few occasions did pass the test messages (but only after I closed Windows mail and then reopened.) However, Windows Mail has stopped working again.

  Just once, I got details of an error that has been ' ERR protocol error. Port 110, secure (SSL): 0X800CC90. 0x800ccc18 error number. "However, it was the only time. All other times, the error box is completely blank.

  I would be very grateful if someone could help me solve this problem.  I'm very IT limited knowledge.

  Cody

  I looked in the links provided by Karena & Bruce, but they did not provide a solution to my particular problem.   I must say that I have noticed some improvements to Windows Mail but the button "Send & receive" still does not work properly. I can now send and receive messages.  If there is no message on my e-mail server of the Virgin, access automatically when I open Windows Mail. However, if a new message is sent to me and as I click on "Send & receive" Windows Mail is already open on my computer, I always get the empty error message. The only way I can access the message is to close Windows Mail and re - open once again, when the new message is downloaded automatically. I found a link that says this error could be due to a duplicate news account.  I found that I had two ms.news accounts in my Windows Mail account and remove one of them.  However, this has not resolved the problem, and I'm still only able to receive new messages by the opening and closing of Windows Mail.

  Does anyone have any other suggestions?

• You met the C00D10D1 error message when you use Windows Media Player

  Hello

  I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

  You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Codec is missing

  Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

  The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

  Hello
   
   
  1. What is the file type or extension that you try to play?
  
  If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
   
  See also:
  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.