URLRequest (?) compiler error IOS
I noticed a mistake that occurs only after I exported in my iPhone for additional tests.
I have a function on my App that tests if the user has access to the internet so that they can use additional features (log in, scores, updates, etc.). Please note that theerror that it does NOT occur if I run the application as a .swf. The .swf works fine. Before ask you, yes my phone is currently online. In fact, a previous version of my application, I did in Flash can connect to the internet, but my recently 'upgraded to Animate"version cannot. Same code. I use the latest available SDK (22.0.0.153)
Here is the code because I know someone will ask. I am sure that it is a kind of question when the .swf is converted into a .ipa, so I doubt anyone can help me other than the folk of Adobe... which I hope to see this and to provide assistance, so I can get out an update. I've been using this code example for these past two years with great success, but now all of a sudden it doesn't work.
function onlinechecker() {}
var onlineloader:URLLoader = new URLLoader;
onlineloader.dataFormat = pouvez;
var onlinetest:URLRequest = new URLRequest ("http://www.smileycrewproductions.com/scparacde/scripts/arcade-onlinetest.php");
onlineloader. Load (onlinetest);
function runonlinetest(event:Event) {}
online = event.target.data.online;
checkadmeasure()}
onlineloader.addEventListener (Event.COMPLETE, runonlinetest);
}
It is not easy to give an answer when given of misleading information. for example, or code snippets that you have posted will compile even under any version of air. It is likely that you have failed some of your code and making it more difficult to debug.
It is even doubtful that your title is correct as (far as I know) there is no 'new' compiler error in SDK sdk 22 vs 17. so, if you really have the varialbe "online" typed in the scope of your code posted somewhere, there will be no compiler error in 17 and none in the 22 sdk sdk.
who says:
(1) to install previous versions of app: just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html
(2) for other SDK, find and download archived Adobe AIR SDK versions
(3) once fix you the problems and see no compiler error (if you don't really see everything), you will probably meet most of your problem: a failure of your application to work when it is installed because of updated air for safety (from the air 20) ios app that you can resolve by updating your app descriptor by adding :
]]>
Tags: Adobe Animate
Similar Questions
-
I built a simple application using Flash Builder 4.6 and have successfully deployed to the Android Market (after testing on my own Android device). I also took this same application and compiled for iOS and tested on my iPad.
I then did the Release with the final 'Release for App Store Distribution' option in the release generation Wizard. I have all the certificates supply correct in place and compiled the application in a .ipa file.
At this point, you use a MAC, I ran the Application Loader utility to upload my app to itunesConnect portal to get it in the appstore. I already went through the steps to enter metadata, pricing, and screenshots in itunes connect portal and just need to download it for review.
When I download the .ipa file into the application loader, it gives me the following error:
"iPhone/iPod Touch: contains executables of the application not supported architectures: arm.
Anyone have any idea what this means and how I can fix this? Any help is greatly appreciated!
Thanks in advance!
He solved. Just add the following text in the tag
for iPhone in my app descriptor XML file: UIRequiredDeviceCapabilities WiFi ARMv6 ARMv7 -
FileReference compilation error
I'm trying to get a simple example to work. I can make it work if I publish in FlashPlayer10, but not FP 9
import flash.events. *;
import flash.net.FileReference;
import flash.net.FileReferenceList;
import flash.net.FileFilter;
import flash.net.URLRequest;var yourName:String;
var myfile:FileReference = new FileReference();myButton.addEventListener (MouseEvent.CLICK, pressButton);
function pressButton(e:MouseEvent)
{
trace ("buried name is:" + inputName.text);
MyFile.Save (InputName.Text, "Exam_backup.txt");
}The said reference material
Language version: ActionScript 3.0 Versions of the Runtime: AIR 1.0, Flash Player 9 Does that mean AIR 1.0 and Flash Player 9 or what is the problem?
the compile error is...
1061: call to a possibly undefined method save through a reference with flash .net: FileReference of static type.
and when I search the save() method, using the word files to say:
Language version: ActionScript 3.0 Versions of the Runtime: Flash Player 10, AIR 1.5 -
package com.wiley.as3bible.printing {}
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFieldAutoSize;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import flash.printing.PrintJob;
SerializableAttribute public class extends Sprite {} print
private var _printableContent:Sprite;
private var _textField:TextField;
private var _loader:URLLoader;
public void Printing() {}
Load the text from a text file
_loader = new URLLoader();
_loader.load (new URLRequest ("http://www.rightactionscript.com/samplefiles/lorem_ipsum.txt"));
_loader.addEventListener (Event.COMPLETE, completeHandler);
Create a multiline text field that scales.
_textField = new TextField();
_textField.width = 400;
_textField.multiline = true;
_textField.WordWrap = true;
_textField.AutoSize = TextFieldAutoSize.LEFT;
Create a sprite for the text field,
and add the text field.
_printableContent = new Sprite();
addChild (_printableContent);
_printableContent.addChild (_textField);
}
When the text loads add it to the text box and then print the text
private void completeHandler(event:Event):void {}
_textField.text = _loader.data;
var printJob:PrintJob = new PrintJob();
If (printJob.start ()) {}
printJob.addPage (_printableContent);
PrintJob.send();
}
}
}
}the compile error is:
1046: type was not found or is not a constant of compilation: PrintJob.
1180: call to a method maybe not defined PrintJob.
can someone explain this to me?
the .as file you posted above must be registered with the name of the printing industry and should be on your root inside the folder structure
com Wiley.as3bible.printing
CGH "c:\test\com\wiley\as3bible\printing\Printing.as."
and here it is, your fla file:
'c:\test\myPrinting.fla '.
BTW... your .as file must always have exactly the same name that you type in the "public class xxxx extends Sprite.
-
Hello
I am very new to Flash. I get a compiler error when I try to make an example of Animation in the help file. (Found here http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts & file = 00000026.html).
Here is the ActionScript code in my frame 1 (copy and pasted from the tutorial). :
Stop();
function startMovie(event:MouseEvent):void
{
This.Play ();
}
playButton.addEventListener (MouseEvent.CLICK, startMovie);
function gotoAuthorPage(event:MouseEvent):void
{
var targetURL:URLRequest = new URLRequest (" http://example.com/");
navigateToURL (targetURL);
}
homeButton.addEventListener (MouseEvent.CLICK, gotoAuthorPage);
He gets a "' {' ' should ' compile error on each of the lines of two functions.}" Can you see what I'm doing wrong?
(I tried Flash 6 and Flash 8, in which case it was a problem of version or something. Did not help).
Thank you
JohnTry flash 9/as3: it is the as3 code.
-
Hello
I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!
The summary of the situation of the Compilation is:
LabVIEW FPGA: Compilation failed due to an error of xilinx.
Details:
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formalhas no real or default value.
INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formalhas no real or default value.
INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50:Unit ignored due to previous errors.
File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors-->
Total memory use is 189944 kilobytes
Number of errors: 9 (0 filtered)
Number of warnings: 4 (filtered 0)
Number of news: 0 (0 filtered)"Synthesize - XST" process failed
I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused. It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed. Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.
Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.
Maybe one of these two seemingly unrelated points might help.
Shane.
-
LabVIEW FPGA CLIP node compilation error
Hello NO,.
I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node. I have two .vhd files that I declare in my .xml file and all at this point works great. I add the IP-level component to my project and then drag it to the VI I created under my FPGA.
Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile. With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut). If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.
I've included screenshots, VHDL and LV project files. What could be causing an indicator of the output of my VI to force compilation errors?
Otherwise that it is attached to the output ELEMENT, a successful compilation...
After that the output indicator comes with CLIP, compilation to fail...
NEITHER sbRIO-9601
LabVIEW 8.6.0
LabVIEW FPGA
Windows XP (32-bit, English)
No conflicting background process (not Google desktop, etc.).Usually a "trimming" error gives to think that there are a few missing IP. Often, a CLIP source file is missing or the path specified in the XML file is incorrect.
In your case I believe that there is an error in the XML declaration:
1.0
RandomNumberGenerator
urng_n11213_w36dp_t4_p89.vhd
fifo2.vhd
This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files. However, I couldn't see this entity in one of two files. If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:
urng_n11213_w36dp_t4_p89 Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:
oBits: out std_logic_vector (89-1 downto 0)
These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output. I have added the ports and changed your logic of assignment as follows:
oBits1(31 downto 0)<= srcs(31="" downto="">=>
oBits2(31 downto 0)<= srcs(63="" downto="">=>
oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">=>Both of these changes resulted in a successful compilation.
Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design. If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic? Most of the time the FPGA compiler is smart enough to get it out.
-
I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:
"Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "
which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...
Any ideas?
Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.
My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.
I think you should file a bug report using the pages of http://ni.com/support .
In this way we will have better tools in the future.
BR,
/ Roger
-
Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop
Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop
When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)
I solved the problem: the compile error occurred because a single formula node entry was an enum.
When you insert a cast to digital, the problem has been resolved. -
DMA FIFO of FPGA compilation error
Hello
I have a cRIO 9074 with FPGA. I tried a simple piece of code to learn how to acquire the data that is generated on the FPGA at a rate of 10 KHz and transfer it to the host VI to treat later in offline mode. However, I meet this compilation error when you compile the FPGA VI base containing a node to write FIFO (photo of the VI attached below). In compiling the report, it is said that there are 256 RAM Block used (the total number is 40), so an error has occurred. The error notification of exact compilation from Xilinx report is reproduced below:
# From the PAM program
# o toplevel_gen_map.ncd - intstyle xflow-calendar toplevel_gen.ngd map
toplevel_gen. FCP
#----------------------------------------------#
"Target part using" 3s2000fg456-4 ".
Design of mapping in the lut...
Guided running of packaging...
Running based on the delay of packaging of LUT...
ERRORack:2310 - type compositions "RAMB16" too found to adapt to this device.
ERROR: card: 115 - the design is too large to fit the device. Please consult the Design summary section to see what resource requirements for your design exceeds the resources available in the device. Note that the number of slices don't notice it that their packaging could not be completed accurately.
NOTE: A file NCD will be always generated to allow you to examine the mapped design. This file is intended for evaluation use only and will not be processed successfully by means of BY.
Mapping performed.
See the report of map file "toplevel_gen_map.mrp" for more details.
Problem encountered during the packaging phase.
Summary of design
--------------
Error number: 2
Number of warnings: 125
ERROR: Xflow - card program returned the error 2 code. Aborting the workflow execution...
Bitstream not created
Time history analysis
What does that mean? How can I fix this error?
Thank you
Bogdan
Hey,.
Have you already tried to reduce the size of the FIFO memory?
Christian
-
Outside regs, reg 1239 compiler error
I installed LV2009 and trying to open the version 8.6 vi.
I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »
32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.
The attached code.
Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.
-
Hello
If I declare a const, which is based on a value previously declared const I get a compilation error:
const int MY_INT_CONST1 = 10; no error.
const int MY_INT_CONST2 = MY_INT_CONST1 + 10; compile error: initializer must be constantI tried to search the Internet to see if this goes against ANSI-C, but did not find the relevant answer.
Anyone who knows and who have a source of information?
Thank you!
dml72
Hello
As I remember, in ansi C, global variables must be initialized by constants.
So, we can write:
# define MYVAR 5
int a = MYVAR;
because the preprocessor replace MYVAR by 5 before compiling the sources.But if we write
const int a = 1;
const int b = a;We want to initialize b with the value of a, which is a global variable and the compiler should detect an error (declare a constant variable will generate a compiler error if the variable is reassigned to the program, but is still a variableand not a constant).
The same compilation error should appear if write us in the global section
int a = 1;
int b = a;
int c = myFunc ();
However in the locals, initialiseur initializer is not necessary to be consistent, so we can write
void myFunc (void) {}
const a = 1;
const b = a;
c const = myfunction2 ();
...
}In summary, the keyword "const" is not the reason for this error, you can add or remove this keyword, the error will always be the same.
It is simply impossible to initialize a global variable with another variable as global variables are initialized before executing any statement.
Concerning
Etienne
-
Microsoft JScript compilation error CODE 800A03f7
The error comes whenever I'm away from the computer. The error comes in this way, as shown below:
Windows Script Host
Script: C:\User\Avinash (it's administrator name)\AppData\Roaming\4e5f\5849.js
Line: 1
Char: 21949
Error: Constant not terminated string
Code: 800A03F7
Source: Microsoft JScript compilation errorThe error comes whenever I'm away from the computer. The error comes in this way, as shown below:
Windows Script Host
Script: C:\User\Avinash (it's administrator name)\AppData\Roaming\4e5f\5849.js
Line: 1
Char: 21949
Error: Constant not terminated string
Code: 800A03F7
Source: Microsoft JScript compilation erroron the other
Go to start > run and type regedit and enter
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
On the right, look for Shell which should have value of explorer.exe just just like that... All right of explorer.exe, delete if there is nothing.
(This is the correct way, it should be)
(3) under the same key Winlogon also look for Userinit check if it is as in the picture... it's the way it should be...
(This is the correct way, it should be)
-
Hello when I try to compile my code it gives me the compile error!
I've seen this page
http://digital.NI.com/public.nsf/allkb/311C18E2D635FA338625714700664816
and I tried a lot to adapt to my code! reduced use of the lut of 107 to 101%, but he actually uses Interpolation spline 4times separately to move 4 motors! that it overlooked,
I also enclose my code!
Please take a look at reduced fpga4 and rt4reduced! N give me suggestions how can I reduce space, and if this compilation error is indeed bcz of space! This is the maximum can reduce the code! all Motors must move simaltaneously so I can't think about using a spline function unique move one, then the other engine!
Please find the code and the report of the attachmenet1
Sara
-
Microsoft JScript compilation error
I get a daily puzzles from jigzone.com. As I changed a directv satalite connection dial I get this error. While the puzzle is loading this box comes up saying
Microsoft JScript compilation error
EXPECTED
Ok
I click on OK, then back to the top and I click OK again. then the puzzle is in charge. Is there something I can do to remedy this?Make sure that your java is up to date by downloading the latest files from their site
http://Java.com/en/
Simply click on the big blue button and you won't go wrong.
Maybe you are looking for
-
On the Satellite L650-19W keyboard problems
Hello A very strange and annoying problem developed on my laptop about four days ago. First of all, here's my laptop specs: Satellite L650 - 19W8 GB RAM (DDR3)Windows 7 64 bitIntel Core i5 CPU The problem is that some of the keys also trigger others.
-
Characterization of FET.
Hi all, I wanted to perform the characterization of the PA. I used the example of characterization of field-effect transistor in the CWA, but I replaced the model amplifier with Rf3833. I get an error message in the status window saying "the branch
-
I lost my recovery disks for my sony vaio laptop model PVCEB24FX
Hello I lost my laptop recovery disks and now I formatted my computer but it has many bugs init and it's too slow. Now, I want to install the original windows with its pilots. could you please tell me where can I get the medea recovery disk? My lapto
-
I've recently updated Audio drivers based on a Lenovo e-mail indicating that a new version was available (for Conexant High Definition SmartAudio 221). Now, it seems, every time that I reboot the X200T or change the configuration of the Tablet (such
-
LSI20320IE + PV124T (LTO3) + Win2008R2 + PE2950III
Hello Does anyone know if this combination works properly? I've read some horror stories about the drive is detected but not the changer, etc. Need drivers for the card or Win2008R2 them installs by default? Is necessary to use a card to Dell or a no