USB 2.0 Port Replicator II - need drivers Vista

Similar Questions

• USB 2.0 Port Replicator II PX1173E-1PRP-Vista drviver

  Hello
  Sorry, I found that this problem has been resolved in 22.6.07:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=88624#88624

  but this time, I have a similar problem and I have not found drivers cited in "driver page. I have the Toshiba U400-14Z notebook, but this port replicator only work with the XP system. Thank you.

  Did you follow Chad s instruction how to find?
  I found there Vista Driver Package 4.94.071106 version

• Hi speed USB via a Port Replicator advanced for a Tecra 9100?

  I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

  (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

  I had an idea, but I don't know if it will work and need some advice?

  Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

  If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

  Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

  Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

  Thanks in advance

  Hello

  the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

  And the explanation on the PCMCIA/Cardbus solution:
  The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

  I hope this was clear to you :)

  Just buy this card and you will have USB 2.0

  Welcome them

• Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II windows 7 drivers

  Hello, I can, t find windows7x64 drivers for my Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II. I find the driver for win vistax32, but it's not work.

  Hi Michel,.

  The point is that 32-bit drivers will not work on a 64 bit OS and you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  But it seems that there is no 64-bit available driver and you can use t Port Replicator II with 64-bit so far :(
  Maybe Toshiba going 64-bit in the near future

• Tecra S5 - slow ethernet with USB 2.0 Port Replicator

  Hello

  I have a Tecra S5 with USB 2.0 Port replicator II. I have 3 ethernet connections all together on my PC: LAN on motherboard, WiFi and the other on the USB port replicator.

  At home, I use WiFi for internet connection and USB to Ethernet to a wired connection to devices with built-in web server.

  My problem is that when the WiFi and USB to Etherenet is active the internet and the connection to the web server works but vey slow.
  If I turn off the WiFi and connect to the web server works properly.
  If I disable USB for Ethernet internet connection works correctly.

  Anyone has same problem and suggestion how to solve?
  I downloaded the latest drivers from the Toshiba support page.
  My OS is XPSP2.

  Concerning
  jballa

  Hello!

  It looks like a network configuration problem. Check the network addresses and configuration in command line with the command ipconfig/all.

  Try using static IP addresses. I think that the DHCP server takes a long time to go send an IP address to each laptop.

  Good bye

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• LT2323z - connect to the USB 3.0 Port Replicator

  I just bought the LT2323z monitor to go with a X carbon 1 and connect via the USB 3.0 port replicator.
  However the LT2323z has displayport digital connections and the DVI-d port replicator. Any ideas how to connect to their place? Here are the flagship of Lenovo products, bought directly with Lenovo, but they do not seem to be compatible. I'm missing something until I send them all back for my money!

  The LT2323z, take the VGA connection, which takes care of your USB docking station 3.0 with the adapter DVI to VGA, which is included in the box. But the quality of the video connection is not terrible.

  There is no solution from docking station USB supported displayport. If you need to connect to the screen, you must use a direct miniDP to DP cable connector (which is unfortunate).

• Need drivers for USB 2.0 Port Replicator

  I just bought a Satellite Pro laptop computer with the Windows Vista operating system. I would use my replicator USB ports, but you need to download the driver for this? Can someone tell where I can find a site for me?

  Hello

  I Don t understand why you need the drivers for a usb port replicator? Usually you don t need drivers because windows automatically installs the port replicator.
  Would be interesting (and useful) to know that you have materials. Tell me what portreplicator and mobile you have.

  Would appreciate some comments.
  Welcome them

• Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

  It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
  All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
  He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

  Any guidance appreciated.

  Hello

  I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

  Product type OPTIONS
  Family CONECTIVITY
  Series of products DOCKS & DUPLICATORS

  You will find driver Package for Windows XP Home edition.

  By the way: perhaps some additional software for mouse blocks or a modem. Who knows

• 23 h024: 2 side usb 3.0 does not. Need drivers

  Can someone tell me where I can find drivers for 2 USB 3.0 ports on my 23-h024 side while a windows 7 64 bit. Thank you.

  Thank you for the help, I ended up going to AMD and there I got the USB 3.0 and 4 other drivers day I needed updated. Once again thanks for your help and your quick response to my problem.

  @bgsbnny

  Try here.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_132256_1

  REO

• Satellite Pro M10: IO error, cannot read DVDs/CDs, USB driver for Port Replicator

  I had to format my m10 pro like the multidrive dvd kept as an IO error and refuses to read my dvd/cd etc.
  I reloaded all software and the multidrive dvd (Panasonic coursc 810) will always return the same IO error.
  I have also continued to asked a USB driver load? Replicator port, I can't find my original installation CD?
  Someone help please?
  Thank you very much
  Joe Dawson

  [Edited by: admin on 21 January 06 16:24]

  Hello Joe

  I saw in some your previous assignments that you use external DVD drive too.

  I use my Tecra with Replicator port and a multi LG external DL disk attached to the port replicator (due to the fast data transfer firewire connection). Everything works fine and I wonder how you can have all of these problems.

  If your device is set up correctly, including all the original drivers, tools and utilities that you can find on Toshiba download page should not have any problem. I hope that you have installed the unit without port replicator and you don t forget Mobile extension tool. As much as I know there is no driver for Replicator port and all the signals are loop just to the ports of the replicaror port.

  What is the status of the Panasonic player in Device Manager? The drive is displayed in Windows Explorer?

• HP 3005pr USB 3.0 Port replica: software for USB 3.0 Port Replicator

  Hello!

  CAN´t find the software for 3005pr 3.0 HP Port Replicator Port HP support.

  Hello

  If the device has win 10 OS:

  Please find the driver below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722 & swItemId = ob_165439_1 & swEnvOid = 4192

  Check the drivers for the device that you are trying to connect:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5387722 & swLangOid = 8 & swEnvOid = 4192

  I hope it helps

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• Satellite Pro A10 S811 - need drivers Vista 32 bit

  Hi all

  Im a new user in this forum my English not best... IM from Bulgaria.

  I need drivers for vista 32 bit

  Model: Satellite Pro A10 S811

  Satellite Pro A10 is model of 7 year old laptop and so old books are not supported for Windows Vista and for Windows only.
  Sorry, but Toshiba doesn't offer Vista drivers for this older model laptop.

• Re: Need drivers Vista for Satellite A135-S4467

  Hello

  I need drivers for Vista and Xp drivers for A135-S4467 laptop, but there is no A135 on the official download for toshiba site. Pls tell me where I can find them and tell me if my lap top can use Win XP.

  TNX need your quick help you can!

  Martin

  All the drivers, tools and utilities that you can find on Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  YOU have the laptop model US and it is not listed on the page of European support.

  Good bye

• Need drivers Vista for Portege M500

  Hello

  I need driver Portege M500 to upgrade the operating system from XP to Vista.

  Where can I get it back?  :|

  Help me, please? :-(

  Thank you; \

  Hello

  It will be interesting to know what country you purchased your laptop Portege.
  In any case if you need drivers always check Toshiba support page which is part of the country where you bought your laptop.

  I checked Toshiba Canada support under http://209.167.114.38/support/Download/ln_bymodel.asp page and it's listed Portege M500. I hope this will help you.

  Good bye