USB 3.0 for XPS 8000

Similar Questions

• Studio XPS 8000 (end 2009) + EVGA GTX 750 Ti, wake-up service by default/black screen saver (S3)

  My Studio XPS 8000 (end of 2009) has no problem with sleep (S3) and wake up before I upgraded the Dell OEM Geforce GTX 260 arrives with the EVGA Geforce GTX 750 Ti system.

  At present, the system has no question to go to sleep mode, however, when I try to wake the system by pressing power button/keyboard/mouse, System stucks after I hear the disc hard turns noise, and the screen stays black (no signal), then the system hangs there forever. I have to turn off the system and restart.

  Other than / Eve black screen, the system works without any problem.

  I upgrade the firmware MB(0X231R, intel P55) A03 BIOS, make sure also that I use the latest version of the driver for the gtx 750 ti (344.75 WHQL). Operating system is Windows 7 Home Premium. Still no luck.

  750Ti GTX are supposed to use much less energy than the GTX 260. Is not the issue of power supply. On some forums, I found people say X 58 (not P55, but maybe the same reason) mainboard a sleep problem with latest Nvidia cards, because of the interactions between the BIOS and the operating system. The problem, to a patch of BIOS. XPS8000 being 5 years old, I don't think not that it will receive an update of the BIOS.

  I wonder if there is a solution to this problem?

  Thank you.

  Update: the issue has been raised again.

  I need to talk with Nvidia support agents, and they helped.

  The next step fixed my problem:

  And further to isolate the problem, remove the graphic driver NVIDIA completely and start the cmputer only with generic driver checking windows if she still has the issue.

  Use the display driver UN-Installer (DDU) and remove the NVIDIA files.

  Display of the Nations United-for driver installation (DDU): http://www.wagnardmobile.com/DDU/

  -Restart the computer and when it restarts windows will install the default display driver, let it install.

  Once installed the default driver, please check the functionality of the PC.

  The critical step is to use DDU to completely remove in safe mode video card driver!

• Dell Studio XPS 8000 - Asus Nvidia GeForce GTX 750 Ti Graphics Card

  Hi I have a Dell Studio XPS 8000. Information on the system it's an Intel i7 CPU 860-2.8 GHz 2.79 GHz and 6 GB of RAM. operating system 64-bit, x 64 based processor.

  I would like to know if I could adapt an Asus Nvidia GeForce GTX 750 Ti graphics (2 GB, GDDR5, PCI-Express 3.0) without any problem? Or is there a better option?

  The current map graphic is a GeForce GTS 240, that it came with.

  I searched the internet to find out that if that would be ok, but became confused if the power supply is sufficient, the appearance of it bed 350w max power. I can't find some people say no and Yes.

  My computer knowledge is Basic.

  Thanks for any help.

  You're better than replace the power supply Dell with a retail food more high wattage. Then the video card will be fine. Read your Manual for instructions.

• USB - C on Inspiron 13 7368 INCOMPATIBLE with USB - C on the XPS

  I bought in Hong Kong from DELL Inspiron 13 7368 line (works well). DELL DA200 USB - C adapter for HDMI, VGA, Etehrnet, USB 3.0 and DELL Active Pen (order #810757967).

  The laptop does not recognize the DA200 adapter with or without driver.

  The services licensed in China cannot help.

  I tested the USB - C port of the laptop with the other adapters (to VGA, RJ-45), and it works well. I tested the adapter DA200 on XPS-12 and 13 - XPS, and it works as well.

  The vendors told me that the DA200 is sold with XPS-12.

  DA200 adapter is INCOMPATIBLE with the Inspiron 7368.

  Issues related to the:

  1 is the USB - C on Inspiron 7368 not a true USB - C?

  2. can I use the USB - C on Inspiron 7368 to charge the laptop?

  3. Why is USB - C on the DA200 NOT COMPATIBLE with the USB - C on the Inspiron? How many variations of USB - C is there? This who should I take care when buying an adapter USB - C?

  4. How can I return accessories that I bought and have a refund?

  It IS a port USB C and lies be USB 3.

  It is NOT a Thunderbolt 3 port (which is what the models XPS).

  There are major differences:

  www.CNET.com/.../

• USB 3.0 for macbook pro

  What is the best option to add a USB 3.0 for the port of mini extension on a 17 inch end 2011 Macbook Pro?

  If your computer has no com with 3 USB ports you can improve not USB 3. USB 3 devices are backward compatible, so that they will connect to your USB 2 ports and operate at the speed of the USB 2. You can connect to a USB 3 hub on your computer, but it will operate at USB 2 speed unless you connect it to a USB 3 port on your computer.

• Win 7 USB controller driver for Pavilion 500 - 217

  Hello, I recently spent again PC of my mother to win 8 for Win 7 64 bit. I can't either driver (Intel or AMD) crystallized under drivers available for the controller USB to work. The hardware ID is PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03. I also need a driver for the SM Bus controller unless the driver of the usb controller works for both.

  I should be grateful if you would help.

  Thank you...

  Hello:

  Install the AMD Chipset Driver and restart.  You want to download the chipset 49.7 MB file.

  Who should install the two devices.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If it does not install the USB 3 controllers, please install both of these drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Fpoppy outside disk for Tecra 8000

  Hello
  I need to find the right cable to run a disk drive external floopy on a Tecra 8000
  Cordially AGM

  Hello
  Contact the Service partner and ask them what cable you need exactly. It is an old machine and FDD need some wider connector. Also check eBay. Maybe you can find a low price for Tecra 8000 FDD.

  Check a little on the net. As you know probably on the net, you will find all the information.

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• USB 3.0 for g7-2246-Windows 7 driver

  I'm tryingto findthe right driver for USB 3.0 for windows 7 64 bit

  Hello:

  Download and install the AMD Chipset drivers and reboot.  You want the chipset of 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• 203tx HP 15r: Usb 3.0 for hp 203tx 15r driver

  My driver for usb 3.0 port do not work well leading to speed low transfer of laptop computer for USB

  Thanks for giving me the proper drivers

  card-Hp 15r 203tx

  Windows pro 8.1

  Hello @Md229,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and want to help you!

  You can find the drivers for your product here: drivers - HP for laptop - 15-r203tx

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

  Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  Or here:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  They will help you with your question in the Forums above for Vista.

  See you soon.

  Mick Murphy - Microsoft partner