USB 3.0 problem!

Similar Questions

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• Configuration of USB 2 external 500 GB USB hard drive problems

  Hello gentlemen.

  I recently acquired a disk hard external 500 GB USB part number PX1269E - 1 50.
  I have some problems with the configuration of USB 2.0 in windows XP. When I connect it to a usb 2.0 port, I get the message "USB HDD high speed plugged into a hub non-hi-speed usb", and the unit remains low-speed (12 Mbps) USB. (I checked the port with an another usb 2.0 device and the port works correctly in usb 2.0 mode).
  I checked the PXI1269E - 1 50 in other PCs and I have same results. I can't make it work in USB 2.0 mode. I also have some problems with the virtual CD that is always present when you insert and mount partition. There is a way to remove it?

  I only use the hard drive for data backup every day, and I don't want to use any other drive letters in my system.

  The main PC is an ASUS P4P800-E deluxe with windows XP SP2 fully implemented to update and build in the USB 2.0 controller intel.

  Best regards

  DA P

  I have connected the 500 GB HDD (PX1269E - 1 50) to my Satellite M40 and it works fine. It works with USB 2.0.
  Guys, I think there is something wrong with the controller software or the registry is damaged. Maybe an update is necessary.

  PS: I have not installed the additional software on the supplied CD. The operating system automatically acknowledged.

  @parabolix: using SP1. Try to install whole MS and SP2 updates.

• USB Bluetooth adapter problems

  Hello

  I recently got a new Toshiba Tecra S1 (PM725) and an adapter Bluetooth usb (with More4you software).

  But I can't make it work with my nokia 6310i

  I installed new battery BT (Bluetooth Stack for Windows by Toshiba (3.10.00).

  Analysis of my nokia BT Manager, but when I want to connect to it, it immediately disconnects (after that I supported on accept connection on my nokia pairing) and the BT Manager gives the error: a not to connect to the following service: Dial-up networking. Connection request failed.

  I only installed the BT stack (from dir... BT package /US/) because when I run the installer from the main dir, it does not recognize my BT adapter. He keeps asking to put the int bt adapter.

  I had once it works, but with the next time you start it failed once again.

  Could you please help me?

  Hello

  Therefore, it is very difficult to say what the problem is. In my opinion, it is very important that
  -Adapter USB Bluetooth is installed correctly and working properly
  -Nokia must be added and installed as a new modem
  (The Nokia modem driver must be installed)

  It is not easy to help you because More4you and all settings and options there are unknown for me.

  I think before you start doing anything check there at - it problems with the USB adapter. Next step is the installation of the Nokia modem driver. I'm sure you have some CD or you can download it from the manufacturer's website.

  Please be careful with COM ports (you can use the standard port). In my case the standard port was COM 40. The same port, you must choose to install the modem driver.

  Try again. I'm sure that there is a problem with the settings. Check all out them again.

  If you discover that a problem was it please write again.

  Good luck

• Adapter Bluetooth USB 2.0 problems wirh CN-520

  I installed the software and the hardware and it seemed this installs properly but I can not access the software. Well, click on the Bluetooth system produces nothing and clicking on Bluetooth in the start menu, all programs menu produces nothing. There is no Bluetooth icon in Control Panel.

  So I can't access the software. Toshiba BT hardware Port in Device Manager is not registered under Ports & Lpt. These ports appear to be unavailable or uninstalled. When I try to install the software and hardware by using the hardware installation wizard I get the Toshiba RFBUS. Wizard cannot find the software '. The software and hardware installs successfully on my daughters computer, which is the same as mine.

  I got it up and running recently, however, something seems to have happened since. With the installed Bluetooth software I find now that the computer is unable to turn off the coast. It stops and I have to terminate a program before closing the computer.

  It is titled "Bluetooth manager (loan)" can help you?
  Regards Gary

  I think that your hypothesis is correct. You probably have a serial port problem. Have you installed any additional hardware e.g. USB-To-Serial or any other serial device using a COM port that is already used by the BT stack? All BT COM ports must be correctly installed to operate as expected. Take a look in the FAQ section for more details.

• (S2800-400) Card PCMCIA USB 2.0 problem

  Well, recently I bought this ST Labs USB 2.0 card for my laptop. When I tried to install the drivers I just got a blue screen when the pilots was almost innstalled. It was on Win XP, I got the advice of a friend to change my OS for Win 2000, I did that, but then the pilot innstaller has said that there is something wrong with the device, press Finish to open help.
  I did what troubleshooting said, except that the device was not in the Device Manager to all (Win 2000)

  Some help would be great :-)

  Hi, Lars

  One of my friends uses USB 2.0 PCMCIA card with two USB ports and it has no problem. How have you installed new hardware? You first install driver and after that insert card PCMCIA or you did the opposite?

  Is there any kind of instruction how to do it? It's perhaps better first of all install the correct driver and then restart the computer to insert the PCMCIA card.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• A40 USB 2.0 problem?

  Hi, I just started using an audio interface Behringer USB 2.0 with my A40, but computer crashes quite often (blue screen displays a similar to BACK for a moment and then restarts) a friend told me, he might have something to do with the USB 2.0 drivers? Does anyone have any suggestions? And how you improve the drivers, if that's the problem...?
  capcapcap

  Hello

  It will be interesting to know if you have the same problem using some other USB devices. I can't imagine that it can be the problem of USB. As much as I know there is no update. You can delete all the USB ports in Device Manager and reboot the laptop and all ports will be recognized again. After that, you can try to use it again.

  You can also try a BIOS update.

• Satellite P100-387: VT is not available & USB flash boot problem

  Hello world

  I bought this laptop, but I am very satisfied with the following functions:

  Processor supports VT (virtualization technology), but in the bios is not the option to enable or disable and tools like securable (grc.com) or other show that this option is disabled.
  I check the version of the bios. My is last, but I try to find any information on the web from the seller of the bios and there is tool for verification of the bios.
  With that, I discovered that my bios is not the last and I pay $ 38 for access (3 months) to the new version.

  I can't boot from the flash drives.

  I think on netbook and on the first time I thing about toshiba nb 100.
  But now, I'm not sure it's the right idea.

  Do you know how to solve this problem?

  Celebril

  Hello

  Regarding booting from the USB flash key
  As far as I know this option is not supported by the BIOS, then you will NOT be able to boot from a USB flash key.
  In this case, you could start from ODD, HARD, LAN and USB FDD drive

  Good bye

• Satellite Pro A100 with Modem USB internet connection problems

  Hi all

  I'm looking for some help with a problem. I am struggling to solve. I have a Satellite Pro A100 and sometimes use it with a speedtouch 330 what ASDL USB connected modem, but whenever I use this at some point that I seem to lose connectivity, the Explorer does not display the pages and other applications stop working, even if I do not seem physically the connection loose. It is often the only to get back on the net to restart and start over.

  The modem doesn't seem to be the problem as it works very well with my desktop and the laptop works very well when it is connected through wireless and idea and solution would be greatly appreciated.

  Sean the Bear

  Maybe you should take a look here in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31982&TSTART=0

  There is a user who uses the same modem SpeedTouch 330 USB on laptop with Vista OS.

  You will need to install compatible drivers on the site of modem manufacturer.

• Satellite L755-144 - USB memory stick problem

  I have a L755-144 Satellite with Windows 7 Home Premium.
  I tried two USB keys with this computer. It works fine, the other has the following problem:

  When plugged in the first time, a driver loaded for her and then he saw in devices and printers, but not in the computer. It is not possible to browse the files in devices and printers for this stick and it does not activate the remove material option safely; the files that are on it can not be seen.

  I installed the latest driver USB from Toshiba, but that made no difference. Should I give up and use a different memory stick, or is there something else I could do to make this one work?

  > I tried two memory sticks USB with this computer. It works fine, the other has the following problem

  I think that there is a compatibility problem between the USB and the USB key because the other key USB worked fine so I put t think that it s USB port or driver issue.

• ScanDisk USB Flash Drive problem after upgrade to El Capitan

  After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

  The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

  Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

  It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

  http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

• Serial number v220w to USB Flash disk problem

  Hello world. I bought a v220w hp usb flash drive and not found any number that looks like serial number. I need serial number for troubleshooting. Can someone tell me about the location of serial number in v220w hp flash drive?

  USBDeview from Nirsoft will give you all the information on a USB stick which is not Windows.

  Click on the link below. The download button will be towards the bottom of the long page.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  IF you still have problems with this drive, feel free to ask.

• HP Pavilion dv6-6135dx USB 3.0 problems

  Recently bought this laptop, I like it, it works fine.

  I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

  I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

  In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

  SM Bus controller:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Unknown device:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

  1. Renesas Electronics USB 3.0 Host Controller

  2. Renesas Electronics USB 3.0 Hub

  3. Renesas Electronics hub USB 3.0

  4. Renesas Electronics USB Hub

  Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

  The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

  I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

  The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

  Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

• USB-6211 noise problem

  Hello
  I use an NI USB-6211 device, Windows XP, and I have the problem of blood (photo attached).

  My analog differential signal (signal DC to DC power supply) is connected to an analog input in box usb-6211 (AI1 and AI9 ports).

  The signal I get is evolving between 0V the Volt of entry (in the attached photo - 4V) instead of 4 v DC.

  It might be a good idea to test it with a 9V battery using a differential connection with wiring configuration described in the manual (photo and link below). I know it sounds Basic, but re-seats black connector of i/o to the device might help. Make sure you reference GND AI as well.

  

  http://www.NI.com/PDF/manuals/371931f.PDF