USB 3.0 question! PLS HELP!
I have acer aspire es1-131-P4YH model... the following questions, I am facing right now is...
1. my USB 3.0 keeps cutting and restoring while I transfer files (usually from 200 at most) from or around - 3 key USB to the computer and vice versa. I have an ADATA 16 GB USB 3.0 UV150 key...
I hit google and has almost everything fact...
-usb energy saving suspend power management
-"allow to disable usb energy saving" disabled for usb 3.0 extensible host controller, controller xHCI and also for same input device usb human interface device tab, and also when usb is plugged in, a new device from USB mass storage pop up... that is also disabled for this too...
-uninstalled/removed all form tab USB controller and rebooted the computer to auto/load to reinstall drivers usb 3.0 - same question
-one last thing, I have a usb 3.0 host adaptation pilot came with the laptop... Installed and hoped it would work now... but NO!... This is not the cd rom and usb 2.0 is used for the mouse... .so to transfer or install I especially need to rely on usb 3.0... someone had to help me out here... I'm in big trouble
I received the netbook with windows 10 pre-installed... pro is this hardware problem or a driver problem
ALSO, WHAT IS THE VERSION OF THE MODEL INTEL CHIPSET?
Good so I think you can contact Acer directly for support
Tags: Acer Laptops
Similar Questions
-
access quick and stupid question, pls help
where can I find and run the Configuration Wizard of Cisco Unity Message Store
\commserver\ConfigurationSetup\setup.exe
-
on the virtual hardware noob question, pls help
I have a problem. I have a system with vmware not made by me, but now I have to take control of it and make backups of machines. I want to buy essentials and essentials of veeam vsphere.
Today, I read this:
Virtual hardware
• Virtual machines with disks involved in the shared SCSI bus are not supported, because VMware doesn't support taking snapshots these virtual machines.
• RDM virtual disks in physical mode, Independent disks disks connected via in-guest iSCSI initiator are not supported and are ignored automatically process.
Where can I find this information? I mean where can I see in vsphere client if I am in this situation? Is there something one place where I can find clear if my system is in this situation? I had under Configuration, storage adapters, and it is written:
Broadcom iSCSI adapter
vmhba32 iSCSI
This means that I'm doomed?
Hello
This information is on your VM configurations. If you need to choose your VM--> pass parameter to change. Then select your SCSI controller and verify if the virtual or physical mode is selected.
. For RDM, just select a hard drive and check to see if you have a logic unit number instead of a vmdk. But if it's a vmdk you will not see the physical or virtual mode option.
Kind regards
Julien.
-
I use microsoft Windows xpsp3 teacher that my question is wn I install winxp after 6 months that my hardware (motherboard) will be too bad so I'll be changed motherboard so I can use my OS still this material, I've heard could not appu .so wy use winxp.so me.pls help
You can reuse your current XP only if the version is not OEM. OEM is a version that must be supported directly by the manufacturer of the computer first. OEM is always linked to the first PC, the license is activated on. This license is suppused to 'die' with the PC. Now, there is a "grey area" on the definition of a PC, but accepted the more common definition all came to the conclusion that the 'mother' is the building block for the definition. Therefore, change of motherboards would mean you have a "new" PC
-
I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!
Please tell us how wipe you the drive and how you tried to reinstall OS X. And what was the error, and how he help you trying to reinstall OSX again? You can look at writing an effective communities of Apple support question before you answer because we are not spirit or psychic readers.
-
My Ethernet port is not running iMac mid 2011. Pls help me.
Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.
Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support
Try another ethernet cable.
He still does not? A report with the information more wrote an effective communities of Apple Support question
-
Confused why my drivers do not work pls help!
Recently, I did a reinstall of my windows 7 I have a model CQ5310UK.
I tried to get the main drivers for my model and went to this page here which I believe is the right one to get: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=4104...
I chose the first one on the list: Original NVIDIA Unified Graphics Driver
I downloaded fine and opened it and it came with this: your system does not meet the requirements of the operating system. Update has been canceled. (9997)
I don't understand why he did what I did all well I chose the version that is windows 7 which is what I use! can someone help pls!
Hi Big bluestem
I answered you in your previous post
More information on your error
http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=in&DocName=c01728720
Your erros is because the 64-bit and 32 bit OS, you must choose the good update, as intsturcted in my previous answer, go to the nvidea Web site and download from there.
Concerning
-
So I bought the new laptop (hp pavilion 15-p153nm), in the shop where I bought it says that this laptop have two memory slots, so I buy the new 4 gb ddr3 ram card and wanted to put in the free memory slot, but when I opened the laptop that I couldn't find free one slot... so my question is where is this second slot... I use other products (printers and laptop computers HP etc.) for 10y and if this is an hp error and they didn't put the second slot in this notebook, I'll be very disappointed.
And yes I find manual for this laptop, I opened this laptop from this manual and he drew two memory cards but its all is said about memory cards. I have pictures of the laptop and everything and I will put them here.Configuration software Specy
It says that I have a free slot? but I still don't see.
Now I'll put pictures of the laptop inside
under the keyboard
Other side of the main card
Under the motherboard
So pls help me to solve this mystery of the second memory slot.
And sry for my English isn't my main language.
TNX for helping me. Good bye
There is no second slot of memory in this model specification.
You need to replace the module installed with a capaity module above uppgrade the memory capacity.
On the three t pageit the manual describes two locations only on some models. It does not describe what models they are.
-
Pls help I'm totally stuck trying to reinstall windows 7 on my computer hp mini 110
I have a hp mini 110-3538tu and he played in all directions upward and very slow, so I have a USB stick with Windows 7, which I am trying to install on windows 7 starter edition, but when I get to the part where I have to choose the driver to install, I can choose my USB but it says no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. I can't have happened here. A beautiful person out there can pls help.
Hello:
See if it works...
I zipped and attached the controller driver SATA NM10 your laptop uses the label of attachments below...
Unzip the file and copy the content without all the folders in your USB flash drive or flash drive, if you have two usb ports.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed (or access them if you put them on the same flash drive than your installation of W7 file).
If you check the box, it only includes the compatible driver.
Follow the prompts and hopefully, W7 should install.
-
try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help
Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I asked this already - response supposed to communicate with windows live hotmail - where? Return to this page... pls help - the I am crazy! THX!-* address email is removed from the privacy *.
Hello
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.
-
Hello
My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below...
So I press start to update the BIOS. at that time there than in the red question marked area (?:?) got the massege "do not shut down the PC when the update is complete" like that.
during the update my PC has low power. Then it's the exit ramp.
Now the problem is when I turnon my the computer power light but no display no sound, nothing comes on the screen. I think that the BIOS has been deleted or corruption. pls help me to do something about it. It is very useful for me
Thank you everyone
Looks like this power loss that happened after that BIOS reflash had progressed too far to recover, you may need to have HP reflash the BIOS eprom in their establishment. Call HP and ask them how to get it. Since it is still under warranty, you will not have to pay for the fix.
-
Vista Bluescreen BCCode 116, pls help!
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
More information about the problem:
BCCode: 116
BCP1: 85767510
BCP2: 8E82CC14
BCP3: 00000000
BCP4: 0000000D
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
More information about the problem:
BCCode: 116
BCP1: 86824008
BCP2: 8E827C14
BCP3: 00000000
BCP4: 0000000D
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1
I get a Bluescreen restart in 2 consecutive days. A few days ago I plugged a TV (USB) tuner to watch TV from my PC, shortly after that, I got internet connection issues so I stopped using it (not sure if the bad internet connection is due to the ISP, but it seems fine now). I don't know much about computers, pls help!
Hi KumaoKumao,
I suggest you follow the steps in the article.
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
-
Smartphones blackBerry pls help: o (I'm new owner BB
Hello to all, pls help me... i'm new in BB word...
I unlocked BB8700v for all operators. I put my SIM card, but...
I can't do a sms (have no menu) I can't get sms from someone
I can't call (I can only emergency call) and I can't take the call
I don't have a BES/BIS. Have only gsm card SIM Vodafone CZ and I want to just call, write sms and so on...
I don't need to do email and so on...
When I want only to write sms and use BB Phone is need to register on the BIS Server?
Thanks a lot for some help and answering my questions...
Peter
I want to say thank you very much. In the security option that I have 'disabled voice. ' I'll try to erase it... I will write you result here... Thank you once again
-
my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help
my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help
Because your message was clearly not your comments on the web site of MIcrosft responses, I have he left the comment forum in the forum 'Hardware and drivers' Windows 7.
When you say it "will not open', do you mean physically or you want to tell the printer object in the printers and devices folder does not open when you double-click it?
Have you tried to delete the printer and add it again?
He has already worked? If so, have you changed between yesterday and today? The device is supposed to be compatible with Windows 7 and should not need a separate driver, but if you have Windows 7 32 - bit, you can try using the driver on the Epson website.
http://eSupport.Epson-Europe.com/FileDetails.aspx?LNG=en-GB&data=lkuCfcvA9cw77whFcRdwis4JOQH9mtNd&ID=324678How do you connect to the Stylus DX4050? It is USB, wired network or wireless network? The documentation says it is USB, but I connected USB printers to the network, then maybe you have as well.
The more details you provide on your printer and your system, the better people can help you.
-
problem with my cd/dvd drive... pls help!
I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance
Hello
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
themselves at the start because they will be competing for resources. This does not mean that this issue has been
caused by those, however, it's a possibility depending on which and how many you have installed.You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Save a photo used to file E-mail open on desktop
I just reinstalled windows8. When you save a picture of an incoming e-mail. I have save it and stick it on my desk. I can't open it. a box comes up saying windows cannot open the file. Noah he gived me two choices. 1 research programs that will open
-
All the Addons are missing after a recent update of FF. Backup also failed. How the hell that happened? made me? Went back to recharge add on extensions that I needed to use. However, add it to the toolbar does not appear. Tried restoring add on exte
-
Laptop HP 15-go99er: problem with network and WiFi
Hey guys,. Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems "Network controller" PCI\VEN_
-
Mailing address: can't answer. Clicking on meet 'new' mail window.
When I click 'reply' in the mail opens an empty window of 'new' - it's as if I clicked on the 'new' button by email. I can't then close this window. I have to force quit and restart a. She will be OK for a while, until the same problem occurs. I El C
-
Font book does not start after new created smart folder
Hey gang. I tried to create a smart folder in the last font book. As soon as I did, he started on me beach ball. Since then, it hangs at startup. I dropped the file. Any other suggestions? B /