USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.

Similar Questions

• Windows 7 does not recognize the SD card in the Device Manager

  That pretty much sums up it. I can't understand. my SD card is not launched in 'my computer', but my device manager recognizes it, and little noise "da dup" turns on when I put the SD card in and out. Please help me, I have pictures of my studies that I need it. Anyone else having the same problem? the same answer? Thank you!

  * original title - Windows 7 not recognizing my SD card, even if my computer sees it in Device Manager. How can I get my computer to show my SDCard under 'My Computer'? *

  I had the same problem today. I have, but I fixed it by removing and then reinstalling the driver for the USB 2.0 card reader. He said that the data has been corrupted. so I reinstalled it.

• PXI-8513 appearing does not in MAX

  I have a chassis NI SMU-1071, with embedded controller SMU-8100, DAQ, PXI-6229 and PXI 8513 CAN / XS.

  Today I tried to receive SOME messages by using the XNET Read.vi and Session.vi to create XNET but when I wanted to specify an interface, he couldn't find all the interfaces, while the VI is located on the remote system and the PXI card appear in MAX I have checked my drivers and noticed that I was running NOR-XNET 1.4 I decided to update to 1.5, hoping that would solve the problem, which he did not.

  When I opened MAX after the update, it detects the chassis, but it no longer detects the card PXI8513... He appears on a tab separated from XNET devices, but it has now disappeared. When I open the tab "Display Slot" of the chassis, he said slot 3 is unknown/Emty, although it houses the XNET card.

  The software running on the remote system is the "NI XNET 1.1.1", this could be the problem and if so, how can I change this?

  After reflection and reading this guide of errors (http://zone.ni.com/devzone/cda/tut/p/id/5403) I figured out I don't update the drivers on the target distance.

  After that I updated the drivers through the software tab of 1.1.1 and 1.5 everything works fine now.

• USB 3.0 does not, Windows cannot find drivers

  Hello

  I recently got a Buffalo Drive Station axis speed HD-LXU3. I plugged in a USB 3.0 port as suggested, and Windows did not. So I tried some things and ended up plug it into a USB 2.0 port, after which he started to work very well. I also have a webcam connected to a USB 3.0 port, which the computer does not exist. So I went into Device Manager and it shows two USB controllers that not have installed the drivers. I clicked on "update drivers" and Windows have searched, but found none. I tried looking for drivers on websites (manufacturers of motherboard and processor) Biostar and AMD, but failed to find the right one. Could someone help?

  Danny

  P. S.

  Moterboard: Biostar Hi-Fi A85W

  Processor: AMD A8 - 5600K APU

  OS: Windows 7 64-bit

  I fixed the problem by reinstalling the software AMD Catalyst by selecting the option USB 3.0.

• USB 3.0 port select the pen drive, but does not allow to load mobile

  Hello

  I have acer Aspire V3 - 471G laptop with usb 3.0 port. In this port, it says usb charging device

  the manual also says it can charge when connected to the laptop via a usb port.

  If I insert the USB key, it allows to use, but when I connect the mobile to laptop using data cable the mobile isnot responsible... Why? Please help me... I m in prblem... I think that usb 3.0 is not damaged but not chargin... makes me using trouble.please! 11

  If the USB 3.0 port sees the other USB devices correctly, we know that the USB port works correctly.

  This does not guarantee that load power supply is working properly.

  Make sure that the cable is a charging cable.  If this does not work, you may need to contact the Department for further assistance.

• Hi, I inserted my USB key, but it does not open because it shows the shortcut symbol

  Hello

  I inserted my USB on my pc, but it does not open because it shows the shortcut symbol and I also tried another

  pendrive.it too do the same (does not open) I also scanned the computer, but it shows no virus.

  What can be the problem.pls help me recover from this very urgent problem.its

  Hi Arul,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you are unable to open the USB on the computer.

  I would appreciate it if you could answer the following questions to help you best:

  1. the pen drive recognizes on the computer?

  2. what happens when you try to open the USB?

  3. do you get an error message?

  4 have you checked the question in different USB ports?

  5 have have there been recent changes made on the computer before the show?

  This question could be corrupted USB drivers. Here are some methods that you can try in order to solve the problem.

  Method 1: Run the hardware and devices Troubleshooter and check.

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  a. click Start, and then type Device Manager in the Start Search box, and then click Device Manager.

  b. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  c. Once complete, restart your computer. Your USB controllers will automatically install.

  d. check the issue.

  For more information, see the link.

  Updated a hardware driver that is not working properly

  If the problem persists, or you have questions about Windows Media Player, do not hesitate to let us know. We will be happy to help you.

• Windows 7 x 64 - HP DV7 - 7135US - USB 3.0 does not not at all ports

  I have a HP DV7-7135US causing me severe headaches.

  For the past month I lost access to my USB 3.0 ports. They do nothing - NOTHING.

  I went to the road to reinstall the Intel chipset drivers and drivers USB 3.0 Intel and HP. When I plug anything into the ports, it's as if I did nothing at all. USB keys are not detected, it is as if the ports have been disconnected from the motherboard. USB 2.0 and 3.0 external drives are not detected, or they try to turn or show any activity on their LEDs.

  I also went the road to reinstall the operating system from the ground up (I hate that loads the OEM manufacturers put on their systems!), only install HP drivers and applications on the HP site. I also did the same thing but only install drivers from the Intel Web site - yet - nothing.

  Nothing related to USB only appears in all the event log.

  A single USB 2.0 port works fine - 100%.

  Any feedback is GREATLY appreciated! I really wouldn't know this to send to warranty work - I got it since September!

  Thank you!

  [MORE INFORMATION]
  NOTE: Everything seems to be normal in Device Manager!

  Try a hard reset. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall cord battery & power

  4 powers on and immediately tap / hold key F10 to enter the BIOS. Once to reset the default settings, usually by tapping f9 key. Save & Exit.

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• D810 new camera appearing does not pix in raw files into components 11

  D810 new camera appearing does not pix in raw files into 11 elements and lightroom 4

  8.7 DNGC can be found here: http://www.adobe.com/downloads/updates/

  You can buy upgrades for LR or PES, here:

  http://www.Adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?