USB-6009 has stopped working.

Similar Questions

• All USB keyboard has stopped working

  Hello

  All USB keyboards have stopped working on my installation of windows 7. They work fine in the BIOS or on my Ubuntu installation. When I plug a keyboard, it still gives an error code 29 (drivers not found). I tried using two keyboards: a Logitech Gaming Keyboard G105 and a fairly generic wireless keyboard (a dongle to connect to the computer).

  I tried to uninstall it from the Device Manager and plug or restarted again, but the result is the same. Windows Update cannot find driver updates, and a system repair disc doesn't detect any problems. I temporarily created a fresh install of windows 7, which recognizes the keyboards very well. There is no driver available manufacturer (attempt to all keyboards are supposed to use the base drivers), and the keyboard Logitech gaming software does not see that it is there. 'Control Panel-> devices and printers' keyboards of lists of names, but the shows not even the stuff of work that is just under the Device Manager and the problem-solving the tent and is unable to find the drivers again. Try to select the driver HID keyboard in the Device Manager just in fact give the code 10 error (device does not start) instead.
  Nothing I've tried has gotten me anywhere. I would rather not re-install Windows 7, like all the time and effort to get my system how do I like it took me forever, but I can't see how I solve this problem. Any help would be appreciated.
  Thank you
  Zoden

  There is a good chance a "repair" install will fix the problem as a "repair" install should re-create any missing or corrupt driver installation file.

  I don't see anything definitive where observer records but can provide you with the following file, which can provide more specific information:

  C:\Windows\inf\setupapi.dev.log

• Toshiba 320 GB external USB HDD has stopped working

  Hello

  Recently this evening my external hard drive has stopped working. I can start it and the blue light shows, but it seems that the arm of reading or the mechanical part is stuck or does not start. It has a very low and repetitive clicking noise.
  Before I used to get a strong enough * Click * when starting and now nothing. Nothing does load in windows either, and remains undetected.

  I thought that I could send to repair if it's arm which is broken or needs other than tighteneing as, it's a pretty desperate situation that recently, I cleaned my computer and used the external hard drive as back up, with all of my work for the last 8 years on this subject...

  And I can't afford a recovery of data of 300 books, either.

  null

  Possibly the HARD drive died completely. I mean it might be possible that a head crash could cause this problem.
  My HARD drive died in the past, it was a laptop internal, HDD, and before that the HARD drive is dead, I noticed a strange rattling noise.
  After a restart the laptop the drive HARD was not accessible
  Well, HARD disk crash is not an uncommon problem and it always happens
  So, in most cases, it s also should back up the data twice. That is to say: on DVD, CD, etc.

• keyboard Microsoft usb NEW has stopped working

  the nine key stopped working
  W7/USB keyboard

  Too late, I bought another...

  I tried this link support & it was a waste of time... Thanks for your reply though.

• USB keyboard has stopped working.

  Hi, I have an old Dell Dimension 2400 desktop computer. Recently while driving, the PC keyboard got accidentally unplugged while the pc was always under tension. This is a standard Dell USB keyboard which should be plug-and-play. Since then, the keyboard no longer works. I tried restarting several times, no luck. According to Dell keyboard is supported by microsoft XP and there is no driver is available on the Dell site downloads. I tried the system restore, and it made no difference. Help please. I don't have another keyboard to try.

  Hi newbs68,

  -Other USB devices would not be detected without any problem?

  Try to connect the USB keyboard to USB ports and see if it makes a difference. Also, if possible, connect the keyboard to a different computer and see if it is detected.

  In the meantime, follow the steps listed in the article mentioned below:

  Advanced troubleshooting tips for General USB for Windows XP problems

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• Pavilion dv8000: win7 usb ports dv8000 for has stopped working

  all 4 of the usb ports on my dv8000 has stopped working. Ive tried to update the drivers, no luck. He originally had XP as an operating system, but it has been upgraded to windows 7, I don't know if usb disks are corrupt or what. When I plug anything into the usb ports, it does nothing. Ive been trying to get this fixed for so long and his frustration, someone knows how to fix this?

  Hi again bigd4747,

  It is good to hear from you!

  I have conducted research on software and compatible driverscommits and have found that your laptop has no compatible drivers for Windows 7.

  Alternatively, you can try to update the drivers of USB port in Device Manager by following this document on How to install a driver in Device Manager. If it does not install the necessary drivers for the USB communication, you may need to downgrade to Windows Vista (32 bit).

  I hope this helps!

  Best regards

• Logitech USB headset mic has stopped working

  Windows 7 - headset stopped working suddenly

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  About 5 days ago my Logitech USB headset microphone has stopped working.  The helmet always plays the sound, but the microphone is not input all the sounds.

  Things I've done:

  -Uninstalled / reinstalled the Driver Headset, USB Drivers, & sound card driver.

  -helmet I tried on another pc (it worked)

  -tried headphones different USB on my machine (a no exit worked / entry)

  -tried headphones with input jack then the sound card. (has no output worked / entry)

  -bought a new sound card and used the headset with Sockets (has no output worked / entry)

  -tried all the possible configurations of devices of entry & exits in my sound options (nothing worked)

  -Re-enabled the sound card integrated and connected only (output worked / entry has no)

  1 odd thing happens.  If I smack physically the pc microphone picks up which leads me to believe that somewhere the sound is just set really low rather than not working do not at all even if I turned upwards never slider that I can find to max volume.  I get no error.  Nothing has changed recently with my pc.

  Technical support of Logitech said simply that my 500 DSP is no longer supported in the version of Windows 7 SP1.  Logitech provides no drivers, etc except through Microsoft.  Microsoft web site shows incompatible.

  But after going through Control Panel/convenience store, he started working for the micro and headphones.  Hooray!

• Bluetooth Lenovo S10e has stopped working - device not found / not recognized USB device.

  Hello

  For no reason that I know, installing bluetooth on my small S10e has stopped working.

  I noticed a few times when stop I had a "BTstackserver" does not message.

  I use the laptop to download regularly from a device compatible bluetooth.

  Today, when I go to connect, it says "bluetooth device not found".

  "Verify that your device bluetooth is properly connected and turned on".

  Hardware manual displays the config of LED and is correct, that if I press the "Fn" keys and "F5", I get the menu to turn on and off both the wireless and Bluetooth. I can turn on and off Bluetooth and wireless both with this menu option, BUT when I activate the bluetooth, I get the message 'one of the USB devices attached to the system is faulty or is not recognized.

  I deleted the Bluetooth installed and re-installed software by using the two bluetooth install files published on the list of drivers on lenovo S10e. Neither one works. I know that you need to install dir C:\DRIVERS once Setup has finished unpacking.

  I tried several other obvious things but without success. I also enabled "Bluetooth coopération" in the wireless LAN settings.

  All I can do now is get to the Bluetooth device under the keyboard cover and take a look at that? Anyone who has any suggestions until I get out the screwdriver? (The unit is out of warranty).

  

  I received my replacement bluetooth module and installing it, bluetooth is working again.

  I keep getting "BTW stack server" stopped responding when stopped down, but this does not seem to cause any problems.

  Too bad that original bluetooth module did not survive barely a month after the end of warranty date...

  I'm used to a greater reliability of Lenovo.

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Time capsule has stopped working

  Time capsule has stopped working. No orange or green light. Food is the device. Is there a fuse that might be blown? Reset it would bring to life?  Is it possible to get the backup data stored on it?

  Is there a fuse that might be blown?

  Sorry, but no.

  Reset it would bring to life?

  No, unfortunately it wouldn't be possible to reset the time Capsule if it will feed at all.

  Is it possible to get the backup data stored on it?

  Open the Capsule and remove the hard drive. Place the disk into a USB to SATA cart and which connect to your Mac.  Here, I'm assuming that the Time Capsule is not yet covered by warranty or the AppleCare, as it opens the warranty, if it is still covered.

  If you could post back with the model number of the Capsule of time... it is on the lower part of the device, probably embedded in the foam pad base, and begins with an 'A' followed by four numbers... we may have some additional information or advice for you depending on the model you have.

• "Configfree has stopped working" error on Satellite L300 Win7_32bit running

  Full text message * task status bar Menu ConfigFree has stopped working *.

  Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.

  Google search: some believe it is a virus, others believe that it is a matter of hardware/software.

  How should I do? Any ideas?

  Thank you

  It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
  Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.

  I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?