USB-6009 not recognized after the blue screen of death

I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

Tags: NI Hardware

Similar Questions

  • Lenovo z50-70 used power up after the blue screen of death on windows 10

    Hello Sir/mam,.

    My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.

    I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.

    When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.

    I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."

    I tried too many times but it won't work.

    Please help me to LENOVO.

    Thank you

    Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.

    I just discovered that one of the ram is not working. That's all /... case closed

  • Upgrade to LR4 after the blue screen of death

    I got LR3 and that he would upgrade to LR4, but before I did my computer crashed (does the blue screen of death).  Have reformatted the hard drive and the photos re-installed but not LR yet.  What I have to reinstall LR 3 and then install LR4, or can I go straight to the installation of LR4?

    You can directly install LR4. He will ask only for the LR3 serial for verification.

    Mylenium

  • Acer laptop does not start after the blue screen

    After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

    The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

    But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

    1. try the system restore.

    2. try to do a startup repair disk.

    3 acer Recovery Options.

    4. contact Acer.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

    Acer eRecovery made

     

    1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

    ·        The unit is able to reload Windows from this mode faster then CD.

    ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

    ·        Users are able to change the password in this mode for eRecovery only.

    ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

    ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

    2. in Windows, there are 3 ways to access eRecovery functionality.

    ·        Press Alt and F10

    ·        Open Acer eManager and then double-click eRecovery.

    ·        When a system is new it should automatically open this application and invite you to do the recovery media.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.Acer.com/worldwide/support/index.htm

    Support &

    See you soon.

    Mick Murphy - Microsoft partner

  • Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

    Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

    Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

  • Mozilla Thunderbird will not start after the blue screen.

    There was a program that was supposed to update the drivers but caused a blue screen. I had to go back to a previous point of reset to get Windows 7 running again. Now Thunderbird gives me an error "could not load XPCOM" at startup. What should I do?

    I solved the problem as follows:
    1. turn off the antivirus software.
    2 delete the program folder in Thunderbird, C:\Program Files\Mozilla Thunderbird (Windows 32-bit) or C:\Program Files (x 86) \Mozilla Thunderbird (64-bit Windows) by default.
    3. use the browser to download the Thunderbird installer on the Mozilla site.
    4 reinstalled Thunderbird by running the installation program.
    5 turn on antivirus software.

  • I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

    I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

    Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

    I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

    Help!

    Thank you.

    So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

    I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

    Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

    Nice day.

    Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

  • Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

    I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

    IRQL_NOT_LESS_OR_EQUAL

    and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

    PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

    I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

    Thank you very much!

    Try this to save your data:

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.
    Mick Murphy - Microsoft partner

  • Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

    My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

    Hello

    1. have you made changes on the computer before this problem?
    2. What is the model of the keyboard?
    3. are you an error message or error code?
    4. which version of the Windows operating system is installed on your computer?

    I suggest you to consult the following Microsoft article and check if it helps.

    On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

    Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

    Keyboard and Microsoft mouse refer:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Reference:

    Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

  • Cannot start after the blue screen "page in the nonpaged area failure."

    My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

    I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

    No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

    I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

    Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Stop: 0x0000007b (0xf78d2525, 0 x 000034, 0x00000000, 0x00000000) with the blue screen of death

    I have a compaq presario v6254ae and you have the blue screen of death. I tried to restart using all different modes, including the recovery console, nothing helps. Unfortunately, I'm not a computer genius, and the need for the very simple instructions on how to get the laptop back running. I used the system recovery discs, but they are not recognized, so now I'm stuck and no idea on how to remedy the situation. Help, please

    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
    http://support.Microsoft.com/kb/324103

    Check your SATA mode setting in the BIOS "is not" value AHCI, set it on the SATA/IDE mode.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • need help with the blue screen of death!

    Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

    blue screen:

    Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

    technical information.

    Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

    isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

    then he dumps memory and reboots.

    any help would be full use thank you.

    Hello

    References to Vista also apply to Windows 7.

    It's my generic how updates of appropriate driver: (look for the BIOS and driver
    updates.)

    This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
    for the drivers Microsoft hide - updated those without drain in their names. (Also updated
    the BIOS and chipset drivers.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on
    your system. For each driver in the list, additional useful information is displayed:
    load address of the driver, description, version, name of the product, the company that
    created the pilot and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit system Maker as replacements and manufacturer device which are the
    most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
    and complete the model of your video - double click - tab of the driver card-
    Note the version information. Now click on UPdate Driver (this can do nothing
    that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
    will update the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
    If there are 3rd party with their own software and drivers and the other main device drivers
    you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
    and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
    their latest versions. (Look for the system to update the BIOS, Chipset and software updates
    Site of the manufacturer here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
    REBOOT after each installation.

    Always check in the Device Manager - drivers tab to be sure the version you are
    installation actually appears. This is because that some rollback of drivers before the
    later is installed (particularly that audio drivers) so to install a driver - restart
    -check that it is installed and try again if necessary.

    Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
    SCANNER - check manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using
    the above methods is preferable to ensure the latest drivers from the manufacturer of system
    and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable driver facilities
    in the updates of Windows, which leaves on Windows updates, but it will not be installed
    pilots who are generally older and cause problems. If updates provides a new
    driver then hide it (right click on it) and then go get new ones manually if
    you want.

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    ==========================================

    Tests of memory intercept all errors such as memory do not match (possible
    even for the Poles that seem identical) and when the faster memory is placed
    in the system behind the slower memory. So it is best to also swap sticks in and out
    to check for those even if all the tests of memory are not a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For Vista/Windows 7 memory diagnostics tool

    Start - type in the search-> memory box - find top Memory Diagnostics tool
    -Right click - RUN AS follows ADMIN instructions

    Windows Vista: How to scan / test your RAM or memory with Windows Vista
    Memory Diagnostic tool
    http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

    How to run the diagnostic tool memory in Windows 7
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to troubleshoot audio issues cause by the blue screen of death?

    I faced a problem with my audio laptop. This operating system: Windows 7 Home Premium SP1. He has some kind of problem when I watch a movie, I can't hear any sound coming through the speakers, and even when I plugged in a headset, the same thing always happens. The problem occurs after I have reformat my laptop because of the blue screen of death.

    Hi Luqmanmuaz,

    Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

    See this article to resolve the problem of aid:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Reference:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • When I print, I get the blue screen of death.

    I'm running an Asus U47A, intel i7, 8 GB of ram.  Bought a printer cheap for the College, the printer HP Deskjet 1000 J110a (printer of $ 30 million).  Please don't tell me I'm cheap and I should have bought the model upward, it would not be useful.  Whenever I have print or the print job will complete successfully, either during the print job, my PC will crash and gives me the blue screen of death.  What should I do? I uninstalled the printer drivers, reinstalled them, check the updates, and install them directly from the HP site... you name it.  I am ready to throw my head through the wall because I need to print frequently and having my computer crash in the middle of a document is not what I need.

    Any help would be greatly appreciated, thank you very much.

    In addition, the issue may be the iusb3xhc.sys:

    Bugcheck 1E, {0, 0, 0, 0}

    WARNING: Unable to verify timestamp for iusb3xhc.sys
    ERROR: Module load completed but symbols can be loaded for iusb3xhc.sys

    The iusb3xhc.sys, which is dated December 5, 2011 is an Intel USB 3.0 driver.

    Try to update the iusb3xhc.sys by installing the next update:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

    The same error was reported by other users, as in the following link:

    http://www.SevenForums.com/crashes-debugging/236644-BSOD-mostly-when-printing-photos-Ntoskrnl-exe-iusb3xhc-sys.html

    If the error persists, try the printer on another USB port such as the USB 2.0 port.

    You might also uninstall the Intel USB 3.0 driver and let the USB ports operate at 2.0 speed as which seems to have stopped errors blue screen in the link above for a user.

    Also, another printer, not necessarily a more expensive, but a different brand or model may not exhibit the same problem.

    You might try using a printer if possible.

  • I get the blue screen of death, I do before going to the Geek squad?

    I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

    Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

    You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

    You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

    http://answers.Microsoft.com/en-us

    Kind regards...

Maybe you are looking for