USB and DVD not recognize anything it shows that peripheral unknown.

Similar Questions

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• USB does not recognize anything

  I have a Toshiba A60-S1662. A USB port. The port has power, drivers are loaded, and it has a brand new XP Pro SP3 OS. The hub will not recognize anything I plug in there. I have assigned driver but refuses to play nice.

  It seems to me that it is hardware problem of your USB port.

  I downloaded the manual of your laptop and there is a slot of your laptop where you can insert "PC Card". PC card can contains the USB port.

  More information on PC Card:

  http://en.Wikipedia.org/wiki/PC_Card

  LC

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!

• When you connect to YouTube it asks to connect to iTunes, but I'm already logged on iTunes and is not recognize my password?

  When you connect to YouTube it asks to connect to iTunes, but I'm already logged on iTunes and is not recognize my password?

  Already logaged in many applications on the Apple id and password correct ipad I'm when it asks for it is not to recognize the password. ?

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• I just bought a new computer and is not recognize my printer. I now have windows 7

  I just bought a new computer and is not recognize my printer. I now have windows 7. Need answers please. Thank you.

  Try to update the driver for it.

• My "installing update" is frozen at 0% and will not do anything else. It has been like that for about an hour. Can anyone help?

  My "Installing Update" bar is stuck and frozen at 0% and will not do anything else. Can anyone help? For about an hour.

  Hi Nathrotep,

  Close all processes mentioned below, re-launch creative cloud and share the results.

  • CreativeCloud
  • Adobe CEF Helper"
  • Service Office of Adobe
  • AdobeIPCBroker
  • Creative cloud
  • Installation of Adobe
  • AdobeUpdateDaemon
  • AdobeServiceInstaller
  • AAM Update notify
  • CCLibrary
  • node
  • The basic clock

  @KateGee, error code, try 201: troubleshoot Adobe Creative cloud download, install and update questions

• Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

  Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• My usb port don't recognize anything I plug into it and I'm new to computers

  I tried to update my gps that he did not recognize that there is that whatever it is even plugged into my laptop at all. Then I used my laptop wives and he worked.it is as if my usb ports weren't working. Please HELP, very ignorant for computers. JP.

  Hello

  1. What is the operating system installed on your computer?

  2. you get any error message?

  3. were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1

  Follow the steps from the link

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• USB and DVD does not

  (1) when I'm injection hard-wear PC cannot access mass storage... Please suggest me.
  (2) even DVD does not work on my PC. It shows that research on vacuum... (windows 7 ultimate 64 bit OS ms 2009 system)

  Hello Bharat,

  (1) what mass storage device you are trying to use?

  (2) you are able to play any other DVD in the computer?

  (3) have you tried to connect the USB key to another computer or another port?

  In the meantime, please follow the Microsoft Fixit and see if that helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Also refer to:

  Tips for solving problems of USB devices

  () Also applies to Windows 7( )

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• iMac restart and does not recognize usb-keyboard... freezes black screen with white bar tape

  Does anyone know this problem?... reboot does not work, usb keyboard does not work and the screen freezes...

  

  What version of Mac OS X is installed on the computer?

• Can only use safe mode and can not access anything except firefox

  Basically, there are a few days all of a sudden, a box came up saying Windows Explorer has stopped working. No matter what I click, it returns constantly to the rear. Because I use firefox, I can't to anything except this, and I can't get him if I use safe mode.
  It is terribly annoying, I have 6000 + photos and other things I need, i.e. duties.
  How can I fix? I can't use the normal mode, and it's annoying.
  Thanks in advance.

  Then download your data either by:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  Then do a restore clean factory/install of Windows.

  I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• My computer does not start a player - A does not exist and does not recognize my hard drive.

  My computer does not start. I tried to solve a problem with the disappearance of CD and DVD ROM drives, I unplugged then replugged cables connecting readers to the motherboard and when I rebooted, it told me to insert a bootable media in the floppy drive. I don't have a floppy drive. Before I tried to repair CDs and DVDs, my directory showed an A/floppy disk, because it seemed weird, yet benign, I don't think many, until my BIOS could not find my hard drive. It offers my USB drives and there is no such thing as a floppy drive to boot from. Help?

  If the drive is not detected in the bios, and I guess you actually mean the bios screen, then the drive has failed or the motherboard connections has a problem.

  Once in the bios screen try to reset for fail safe defaults, reboot, see if that makes a difference for the drive detected in bios