USB composite device driver

Similar Questions

• USB composite device driver is missing

  I'm having some trouble to install Generic USB devices on Windows 7 (i.e. concentrators and composite devices). The window can't find the driver for the device, even if it must use only the drivers built into windows. After that I connected the device, Windows reports unknown device.

  In Device Manager, if I select the camera, then press:

  -"Update driver software...". »

  -"Browse my computer for driver software".

  -"Let me pick from a list of drivers for devices on my computer.

  -Manufacturer set "(Standard USB Host Controller)" "

  In the model list, "USB Composite Device" is missing. I think it should be included, as it is on other computers. Why is this lack?

  The driver file c:\windows\system32\drivers\usbccgp.sys exist and there are other Composite USB device listed in Device Manager. Only, it seems willing to recognize new devices.

  Is it possible to reinstall the USB drivers?

  Thank you.

  You are welcome.
  I suspect that the problem is the inf files.  This is another long shot, but it might be useful running sfc/scannow in an elevated command prompt.

  FWIW the link below explains how Windows search drivers for USB devices.
  (Usbccgp.sys) USB Generic Parent driver
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff539234%28V=vs.85%29.aspx

• 52 for USB Composite device driver code (can't check signature of driver) after installation of the updates of August 2014 on Windows 7 x 64

  After you install the updates of August 2014, my keyboard/USB wireless mouse has stopped working, and the receiver is marked as "Device USB Composite" with code 52 - cannot verify the signature of the driver.

  Really, the usbccgp.sys to Windows 7 file is not signed (unlike Windows 8.1), but I've never had a problem with this until recent updates.

  Unfortunately, these values are not in the key "reg" you have asked. (Note: I no longer feel the question).

  I managed to solve the issue of the restoration of a restore point, and at that time system that has pulled the update KB2982791 - I wonder if the problem has been caused by that.

  With all the other August 2014 updates installed, the issue did not reappear.

  

• Smartphones blackBerry 9900 - RIM Composite Device driver not found

  I did a clean install of Desktop Software 7.1, but when I connect my 9900 PC looking for the driver for the device composite rim but can't find it.

  I followed all the troubleshooting tips, but Manager DM answer always when my new 9900 is connected.

  I have a problem to connect to my 9700 and PlayBook. Any suggestions?

  Well, I got it working. After a few other reinstalls, I decided to search the lists to see if I could find acompatible pilot. I found "USB Composite Device" under USB controllers and installed. Now, everything works fine and I spent the devices successfully.

• ProBook 4430 s: USB Composite device failures

  I thought for more than a year that my webcam was causing the Composite USB
  Device to fail. It is the opposite. After a reboot from USB
  Composite device controller is OK and refers to / has recovered one of:
  c:\Windows\System32\drivers\usbccgps.sys
  {Size 99840bytes / created 2014 15 January 18:00}
  The webcam of works though.

  Trouble begins when suspending or in hibernation. It looks like this
  > going out< of="" suspension/="" hibernation="" is="" when="" the="" usb="">
  device controller gets broken. Device Manager then reports:
  "Unknown device" with the details:
  Location: Port_ #0004.Hub_ #0004
  Device status: Windows has stopped this device because it has
  reported problems. (Code 43)

  I checked the disc for errors: No.

  What needs to be done now?

  {See also my previous assignment (27 Sep) to the title of the "failure of the USB controller"
  When I showed error entries in the event log.}

  The MS Community advise to make a CleanBoot, followed of a regular
  Boot.
  Magic! The destruction at random the composite USB device controller
  has stopped.
  I guess the CleanBoot did a registry fix.

• USB not installed correctly, print USB media, mass storage device USB Composite device

  I am running XP and I get these 3 messages peripheral USB Composite USB and USB Mass Storage Device not installed correctly print media. What should I do? Thanks for any help.

  Have youre pc hardware written info if necessary (chipset), & its mfg (intel, amd, etc.).

  go to the website mfg, downloads, get the chipset Chipset youre Installer and install it.

  This gets you drivers/software for sound, USB etc.

• SAMSUNG Electronics Co., Ltd. - other hardware - SAMSUNG Mobile USB Composite Device

  The title says.

  I just went into the control panel Windows 8.1 & this item is there as an optional update.

  Question is why?

  So I think you can safely hidden that update and not review or install it.

• does not install the USB MTP device driver. I can not connect external devices such as the Samsung Galaxy. I tried several uninstall and re - install, no solution

  I tried in the manner suggested in many forums, nothing worked. in fact when I forst connected you Galaxy it worked for a few days, then it stopped. My company ha installed on my PC System Center 2012 Endpoint Protection; However, it is there even when I was able to connect.  I have also the ipad tird and I get the same error.

  the solution to my previous request on the same subject by Rob Thomas596 strictly relates to Apple products and I can't use it for the Galaxy

  Run as administrator command prompt and run the following command:

  NET local service localgroup administrators / add

  This is what fixed my problem after searching everywhere

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB MTP device drivers will not properly install for Samsung Galaxy S3 - Windows will not synchronize Galaxy S3 for computer

  Windows will not synchronize Galaxy S3 synchronizes a mobile computer.  When I attach USB cable the computer flashes added new hardware, but when you click the icon it goes in loops.  I've uninstalled and reinstalled the drivers in Kies and always the same problem.  All other cell phones synced to computer, including the Samsung Galaxy S3 but my iPhone no matter what I do.  When I open Kies and connect the USB cable there is no reconition of the cell phone.  I've seen a Code 31 error appear in good devices.
  Add questionnaires of the Add Hardware Wizard...

  SAMSUNG Mobile MTP Device (a yellow excamation sign)
               
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  SAMSUNG Android ADB Interface

  This device does not work correctly

  SAMSUNG Mobile USB Modem

  This device does not work correctly.

  SAMSUNG Mobile USB Composite Device DeviceThis works correctly.

  This device does not work correctly.

  It is all the information I can give at the moment.  I forgot to mention I am running Windows XP I hope that helps also.  With everything says I don't understand why will not load the drivers required for this device.  For any help or suggestion will be greatly appreciated.  Thank you all

  Hello

  -What is the driver version you are using?

  The latest version is ver.v1.4.6.0 out June 19, 2012.

  I recommend you to please update the USB drivers on your computer and check if it helps.

  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  If this does not help, I would recommend you to please contact Samsung support for assistance.
  http://www.Samsung.com/us/support/

  There is a community forum for Samsung where you can ask questions.
  http://www.Samsung.com/us/support/owners/product/Sch-I535MBCVZW

  Hope this information helps.

• Generic USB Audio device drivers won't load

  I use a lenovo x 301.

  I am trying to connect to a series of musical instruments (keyboards and microsphones) to my laptop, nothing helps. Here are the relevant facts:

  -Devices all work on 6 other machines Windows 7 from a variety of types
  -The devices all use drivers generic "USB Audio Device". There is no specific drivers for these devices.
  -My USB seems to work - so the USB ports are mainly functional.
  -The friendly names of the devices are all identified
  -The .sys and .dll files that are used on the other 6 machines are present on the X 301
  -When I go into the Device Manager and try to manually choose the "USB Audio Device" driver - it is not available. I spent hours looking for it:-)

  I'm puzzled.

  Help :-(

  For any problem of security on NTFS drives:
  It is perhaps part of the problem.
  1. are you an administrator user
  2. set the permissions on your OS partition (such as drive C :) for all THAT YOU ARE Full
  ADMINISTRATORS/USERS/ComputerName/SYSTEM/all the WORLD (Finally, what you think you are)
  There is also maybe something like OWNER who you give special permissions and not full
  You must close the properties after each major change and then reopen to contunue
  Since you've done ADMINISTRATORS be the OWNER, this means you have FULL and SPECIAL permissions
  for all ADMINISTRATORS, who is the most possible freedom that I know.
  3. MAKING the OWNER of Admininstrators everything to implement (some things are still banned it seems)
  4. optionally run chech disc after that
  5. If everything starts after closing you can continue, but until you
  are able to stop cold iron and restart in normal mode from MSCONFIG
  you are experiencing serious problems that should be fixed first.

  TO THE PROBLEM OF USB:
  IT WAS DEFINITELY MY PROBLEM.
  NOTE: REMOVE ANY HARDWARE PLUGGED YOUR USB PORTS-CURRENT TEMP STUFF
  6. If you can't get the appropriate to load drivers or no response when you try to plud in USB cameras or MP3 players do the following
  A. GO TO THE VARIOUS WINDOWS FOLDERS;  INF (can be hidden); System32 AND SYSWOW64 (GOT A 64-bit system)
  B. RENAME all FILES THAT START WITH wpdxxxxx.inf/.pnf/.exe/.dll/.* in [CREDITS]. [GENERIC]. OLD
  in this way, you save the old files without destroying them (keep it forever or until of course you can remove/kill them)
  7. turn OFF your SYSTEM, wait 15 to 30 seconds
  8. RESTART your system (power on)
  9. WAIT UNTIL COMPLETELY AT THE START OF THE SYSTEM (DISK ACTIVITY LIGHT EXTIGUISHES)
  THIS may take several minutes like 10 or 15 minutes, and then you just see some small flashes of your player
  10. CONNECT any free USB port of your removiable disk devices
  11. you should now get a response from windows as if it were the first time you ever plugged

  NOTE: This was the only way I could solve this problem after days of playing with this problem
  There is no solution given by microsoft itself that will fix this error
  If this does not work for you the only solution I can think of will be to
  restore your system before the problem or reinstall the whole OS in the
  same Partition without disturbing one of your other partititions.

  IT seems to me that windows has installed a separate for each device WPD driver that connect
  USB and explains why all the various WPD files. So much happens there are programmers of knowledge
  to set correctly this question and thay simply not create decent error messages that will help
  You can set these things as a layman.

• USB device driver

  I deleted Apple Mobile Device USB driver on my Windows 10 machine with the intention to reinstall. How can I find the installation package for the Apple Mobile device driver?

  Thank you

  Dave in STL

  Apple Mobile Device USB Driver missing

  and maybe:

  http://www.technipages.com/iTunes-fix-iPhone-or-iPod-not-detected-in-Windows

• Device driver USB Apple Mobile and iPhone download updates does not work

  I just got a new phone and I am trying to restore from a backup of my old. The problem is that my iPhone is not showing in iTunes. It appears in the 'My Computer' section as a device. There is a problem with the 'Mobile USB Device Driver' that I couldn't solve. Whenever I plug my iPhone, the said driver installed in vain. I tried to restart my computer, download iTunes more and try the solution where I change the driver to a section of the common media-files-Apple-Mobile device drivers, and when I do that, it says "Windows has determined the software driver for your device is up to date", although the small box yellow exclamation beside it. The choice of 'Roll Back' for the driver already installed is there, so I chose to see what happened. This allows the driver to "Mobile Device" appears, where my iPhone now charge when I plug it into the computer. I go to this device and try to install, and it refers me to a screen that says "Windows found driver software for your device but encountered an error when you try to install it" and then lists the mobile device as the problem driver. I think I can be "go back" to a bad driver, but I can't find out how to download a driver that is correct and working.

  I updated my phone to the new operating system, as well as some downloaded the latest version of iTunes available.

• SM Bus controller &amp; USB device driver is required

  Hi recently I installed windows 7 64-bit OS in my 15-R062TU HP notebook.

  But I am unable to find the device driver of the material following (mentioned also hardware ID).

  SM Bus controller

  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2211103C & REV_04
  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2211103C
  PCI\VEN_8086 & DEV_9C22 & CC_0C0500
  PCI\VEN_8086 & DEV_9C22 & CC_0C05

  USB controller

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2211103C & REV_04
  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2211103C
  PCI\VEN_8086 & DEV_9C31 & CC_0C0330
  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  Please help find the link of device driver.

  Hello

  Please find the link given below might help you solve your problem.

  SM Bus controller

  USB controller

• Small size of device driver USB-GPIB for distro?

  Hi all.

  I had a search, and you can't find a similar question so I hope I'm not duplicating something...

  I created a little app to control an Agilen 53132 meter using the USB-GPIB device OR that I would like people to be able to use internally in my group. Driver I use has been downloaded from http://joule.ni.com/nidu/cds/view/p/id/2315/lang/en.

  I see that my app uses the following DLLs. However, I a) disseminate these and b) there must be some drivers below this level that will be required by a clean system.

  gpibconf. SLL, ni482.dll, nipal32.dll, nipalu.dll, nipalut.dll, nispylog.dll.

  Only problem I have is that it is almost 0.5 GB in size. I want my application to distro with a smaller subset so that the user can install just the driver concerned & dll etc I need for using the USB-GPIB device. Does anyone know if a driver more small value distro exist please?

  Thank you very much

  James

  There is no available smaller driver.