USb device not recognized / Power surge on hub port

I don't have the slightest idea what happened here, but when I plug my defy in a PC all I get is 'USB device not recognized '.

and I can't connect to usingf a P.C.

Ive tried to re-satring the phone and the PC, ive tried also in another PC and it did the same "USB device not recognized"

Ive tried to download the drivers, restart Phone bot and Paolo and still "USB device" unrecognized on the two p.cs.

Ive also tried the USB debugging on the phone mode, but after a short pause, "Unrecognized USB device"


Tags: Motorola Phones

Similar Questions

  • USB device not recognized when connected to Toshiba Port Replicator II

    I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

    I get the error message "unrecognized usb device".
    When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

    So my Replicator does not.
    I deleted the software and reloaded with the same result

    I have a laptop Tecra A8 running Windows XP Service Pack 2
    Any help or suggestion would be appreciated

    As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

    If you try to use the option not supported, it is not easy to give any help.

  • USB Device not recognized Hp OfficeJet 6600

    Hello all - I use my desktop Hp 6600 (connected via usb) jet and my computer (dell E6430 latitude) says that it is a usb device not recognized.  I tried a lot of troubleshooting, including the removal of usb controllers and reinstall, but which doesn't seem to work.  I'd like to help as soon as POSSIBLE. Again, I must keep my printer cable, because the network, I refuse the acess printers or something like that.

    Thank you

    J

    Hello

    If I understand correctly your computer does not detect the printer. You can try the following steps and check the results.

    1) inspect the cable USB and connection:- icon on the USB () facing up when the cable is connected to the product correctly. Check the back of your product and the back of your computer to make sure that the USB cable connects correctly and safely.

    After that you make sure that the USB cable connects correctly and safely, consider the following guidelines to check other potential problems associated with USB:

    • Connect any other USB device. Connect any other USB device to the computer and check if it is detected.
    • USB ports on the keyboard. USB ports on the keyboard and on the front of some computers is maybe not powerful enough to support the product. If the USB cable connects to the USB port on the keyboard, try to connect to it in another USB port on the computer.
    • Length of the cable USB. HP recommends that the lower USB cables or equal to 5 m (16 ft 5 in) long. However, a USB cable which is 5 m (16 ft 5 in) in length must be of high quality. Otherwise, HP recommends using a USB cable that is less than 2 m (3 ft 3 in). Do not use connection cables to increase the length of the cable. Use a powered USB hub, if you need more length.
    • USB ports replacing. Connect the USB cable to a different port on the computer to make sure that the USB port on the computer is not the cause of the problem.
    • Defective USB cable. Replace the USB cable to ensure that the existing cable is not defective.
    • Conflicting USB ports. Disconnect all other USB, USB, USB cameras scanners printers and all other connected USB devices. Start the connection of these devices one at a time to determine if the devices to use too much power. Plan to buy and install a hub USB powered if necessary.

    (2) power Off and power of the device.

    (3) update the Windows Device Manager:

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open text box, type devmgmt.msc and press ENTER. The Windows Device Manager opens.

    (c) lists to look for your HP printer in Bus USB controllers or other devices .

    (d) right click on the entry for device to device/unknown HP and then click on set to update driver. The material up to date hospitality Assistant opens.

    (e) select install the software automatically and click Next. Follow the on-screen instructions to complete the refresh Device Manager.

    (f) repeat these s for all entries of device with a yellow exclamation point.

    (4) delete the temporary files and folders.

    (5) disable some startup items: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration Utility window opens.

    (a) click on the general tab, click Selective startup.

    (b) if there is a check next to load startup items, select the check box to remove it.

    (c) click on the Services tab and then click on the hide all Microsoft Services check box.

    (d) click Disable all.

    (e) click on apply and then click Close.

    (f) restart the computer.

    (6) make sure that the Plug-and-Play Service is activated: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type services.msc, and then click OK. The Services window opens.

    (c) to seek the 'Plug-and-Play services' and check if the status is started.

    (d) if the status is not started, then right-click on it and select start.

    (e) once on the way out of the window.

    (7) uninstall and reinstall the printer software.

    (8) re-enable the startup programs: -.

    (a) click Startand then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration utility window opens.

    (c) click the general tab, click Normal startup.

    (d) click the Services tab, and then select the hide all Microsoft Services check box.

    (e) click applyand then click close.

    (f) click on reboot to apply the changes to the next time the computer starts.

    (9) try to install the software on another computer.

    Although I am an employee of HP, I speak for myself and not for HP.

    -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
    -Please indicate the position that solved your problem as "accepted Solution".

  • Service Pack3, usb devices not recognized

    I have a desktop computer and I am running SP3 on it. Im having problems with USB devices. As soon as I plug them in, computer says "USB device" not recognized A game controller and a USB 4port hub are the devices and they worked fine before. Thanks in advance

    Are your self-powered usb hubs? Who's got it power 110? Try plugging an item at a time and see if they are good. Especially on laptops, using a powered usb hub current it is of the laptop slows down the system because it is not run to 12 volts. Windows stops of concervé power devices. Jon A Martinez MCSE

  • USB device not recognized (Nothing plugged and the mouse does not)

    My mouse (microsoft) wireless worked well until what within hours.
    then I said to unrecognized USB device
    The port works, but for some reason any
    the mouse is not, went bought another mouse and still getting the same message.
    Plus I get the USB device not recognized pop up, same
    Tho, nothing is plugged into one of the USB ports.
    Any suggestions on how to solve this problem

    Computer brand and model?  Windows OS?

    Open the Device Manager

    Click on the + sign next to USB controllers

    Do you not see that unknown device listed?

    Right click on the playlists of USB root hub

    Select uninstall

    Close Device Manager

    Restart the computer to Windows reload the drivers

    USB is now recognized?

    If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

    USB is now recognized?

    How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

    http://support.Microsoft.com/kb/953367

    Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

    http://support.Microsoft.com/kb/944292

    Run the System File Checker

    Right-click on command prompt and select run as administrator

    Type sfc/scannow

    Press enter

    Note: there is a space between sfc and / scannow

    How to analyze the log generated by the SFC Scan file:
    http://support.Microsoft.com/kb/928228

  • USB device not recognized... Unplug the thing does NOT work

    It baffles me that THOUSANDS of people have this problem, or a variant of it, and no ONE at Microsoft or elsewhere also offers a real solution. Unless of course you want to count the method "unplug your computer", which is the most foolish band-aid for a problem I never heard, even if it works for a lot of people (most). I, unfortunately, am one of those for which the "disconnect" method magic does NOT work. I tried everything what all other posters and responder suggested (BIOS upgrade, change Legacy BIOS definition Enable to disable to activate again, driver updates, uninstall all USB, full power down and restart hours later, use CMD prompt to show only devices, etc.) and do not know what else to try. I would really like to see a REAL answer as to the cause of the majority of the questions posted about the USB error outside the usual "restore your settings, use your restore disk, unplug it, replace your USB key, etc etc etc. HEY! MICROSOFT! SOLVE THE PROBLEM! OR, Hey, here's an idea, a news for you, I'm sure that... don't they exude products until they have been tested (NO! I mean really, fully tested [see XBox 360 RROD])

    In case anyone reading this is a real working solution, I'm on a Toshiba A135-S2386, Vista Home, and each USB port is unusable on any device. All ports feeds the device and noise sounds to indicate that a USB device was attached and then proceeds to the display of the error "USB device not recognized" and shows and shows an unknown device connected. It does this for any USB device.

    FINALLY: PLEASE PLEASE PLEASE DO NOT POST A REPLY IF YOU USED THE METHOD OF "DISCONNECT", AND IT WORKED. Grats to you for fixing your computer, but I can just not read another 400 posts of "wow it worked for me great fantastic" when it does NOT work for everyone. I need something new and real. (Sorry to be all grumpy, but I'm tired of these kinds of problems from companies making billions off the coast of junk, defective, half finished, produced a car!) "You listen to Bill?)

    UPDATE: just ran a scan of the system file Confirmation via an administrator command prompt and it's clean...
    ALSO - was not that before, but now whenever I do a complete power down / reboot thing that it gives me a "Bad Checksum" error and I have to reset the date and time in the BIOS. I need to change the battery in MB? As I said it did not have this before and the USB error was produced, but could this be the problem? Bad battery MB CMOS?

    The bios of your motherboard is probably damaged.

    step 1. See if you can find a previous version of the bios of your motherboard and return date of the bios.

    step 2. Find the latest version of the bios of your motherboard and update your bios.

    Do not use a registered version of your current version.

    To check the problem is the motherboard or operating system. find something like a live Ubuntu CD

    http://www.Ubuntu.com/desktop/get-Ubuntu/download.

    or

    Make a Ultimate Boot CD for Windows

    http://www.UBCD4Win.com/index.htm you are using windows xp or borrow a copy to UBD4WIN.

    Both of the above run in memory (does not load on hard drive.

    Both a bit slow, but are excellent tools.

    Works like a normal computer.

    If you can see you USB devices, magicjack, ETC. your BIOS is not corrupt or motherboard problem.

    In normal windows if you see not the USB devices, magicjack, etc your windows install is corrupt.

    Reload Windows of difficulty.

    If you you do not see the magicjack, USB devices, ETC., your BIOS is corrupt motherboard or other problem.

    Redo your BIOS as described above.

    All other unwanted do not work , he was done !

  • Windows 7 - "USB device not recognized" - to load the new electronic Cigarette device. Help, please?

    I have Windows 7 Home Premium.  I just bought a unit of the electronic cigarette, manufacturer is "Innokin Cool Fire IV", the usb charger plugged on Acer laptop and comes to the screen "USB device not recognized".  I loaded different brand before without problem, I don't know what to do and I am NOT GOOD WITH COMPUTERS!  My settings are at "install updates automatically" and I DON'T WANT WINDOWS 10!  Can someone help me please?  Thank you for taking the time to read this.

    This seems to indicate that the charger has actually been detected as a device, but Windows can not work it out.

    Normally such a device should only connect to 5v and 0v pins and have no connection with the pins of data, in this way, that it will not be seen by Windows. I would be concerned by the quality of the device if it has some form of data connection. If you want to continue with this charger, that I would recommend to use a power supply of 5v USB instead of risking the USB port of the laptop, a lot less expensive if it does not. It has been reported several eCig Chargers catch fire. Something like this:

  • USB device not recognized / 43/pilot error was not installed successfully.

    Original title:

    Joystick USB problem

    My USB Joystick worked great so far (2 days since purchased) but it suddenly stop working.
    Computer display error:

    USB device not recognized / 43/pilot error was not installed successfully.

    I tried the Solution as re install disk, unplug the power cords, restart the PC, etc., still does not.

    Also another thing is, it does not work in other PC also and

    Please help if anyone knows. Thank you.

    (Moved from Gaming)

    Hello

    Refer to the steps in this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-controller-code-43-error/1006b7b6-E663-4175-b30a-4dcd91e17c5e

  • PRS-600 USB device not recognized

    I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
    I tried to update the software (even if I think it's in)
    (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
    I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

    I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

    Make sure that the battery has some charge inside. Completely charge if you can.
    Stop eReader (fully)
    Remove the SD card
    Press the button Reset (at the bottom of the ereader)
    Turn it on
    While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
    Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
    If you charge the battery, you may need to contact the support chat for sorting.

    Good luck!

  • His number disappointed + B500 USB device not recognized at startup

    Hello

    We have 2 B500

    whenever I'm starting, after loading windows they give me an error "USB device not recognized" I don't know what to do any help will be greatly appreciated as it is strange that both machines are giving the same error.

    also on one of the machines the sound does not work, I tried to get out of trouble, the diagnostic says the speakers are working properly, but not her out at all.

    I'm kind of disappointed by these questions, we always buy at Dell, but we thought we would give Lenovo a chance, the machines were barely a few months, when the problem started.

    advice please?

    That error usually comes up when a non bootable USB device is connected. Check the Bios and make sure that the CD drive and HARD drive are loading first. That should solve your problem. If this is not the case, make sure that you don't have any USB stick or disk external HARD connected until the PC load.

  • Satellite L30: Usb device not recognized

    I have a problem with my laptop L30.
    When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
    Tried to reinstall windows did not help...

    is there a solution?

    Hello

    Hmm. First of all, you should unplug all external USB devices.
    Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
    Reboot the laptop.

    After this procedure, the operating system should recognize and should install new ports.
    Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
    Usually these drivers are provided with the USB device.

    I would recommend this review if necessary!

  • USB device not recognized. unknown device

    USB device not recognized, peripheral unknown.  I can not connect any USB

    If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

    Help us help you:

    http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
    http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

    Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

    General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

    MS - MVP - Elephant Boy computers - don't panic!

  • USB problem-"USB device not recognized".

    Original title: USB problem

    I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

    Hello

    1. Are you having the same problem if you connect a drive flash or any other device?
    2. Have you tried plugging in Nokia mobile on another computer?
    3. Have you tried plugging it into different USB ports?

    I suggest you send more information to help you better.

    You can also refer to:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

    http://support.Microsoft.com/kb/925196

    USB port may stop working after you remove or insert a USB device.

    http://support.Microsoft.com/kb/817900

    .

  • How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

    I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

    Hello


    You did changes to the computer before the show?

    Method 1:
    Try the steps in the link and check.
    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

    Method 2:
    You can update the drivers on the manufacturer's Web site and check.
    See the link to update the driver:
    How to manage devices in Windows XP
    http://support.Microsoft.com/kb/283658
    Manufacturer link:
    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

    Method 3:
    Try the steps from the link and check if you are able to print.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • USB device not recognized... Vista laptop

    How can I solve this problem?  This quote keeps popping up on my VISTA laptop... "USB device not recognized.  One of the USB devices attached to this computer has malifunctioned, and windows did not recognize it. « y at - it a fix for this error that is displayed for Vista...» Please help it is so boring... I've tried everything.

    Hi, Cricketm,

    Sorry for the late reply.  You posted on the wrong forum.  I will move you to Windows Vista Forum.

    Try this solution:

    Tips for solving problems of USB devices

    Related topic:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-by-Vista/b2c712cb-19da-4fbb-aae2-29d4c5d2ad39

Maybe you are looking for

  • How can I remove Inbox

    When I used to open Firefox I got the search engine Google, now I am faced with the Inbox. How can I delete my computer Inbox

  • lack of private navigation from google to yahoo

    When you type in the search bar of private browsing which has opera mask icon allows to send google it now goes to yahoo. I tried the subject: config and typed keyword.url and reset but that did not work.Any ideas to restore google?Also I was able to

  • Some keyboard keys do not work occasionally, some require hard urgent

    Sometimes my keys work well, as now. Other times, without having to reboot, some keys like R, Y, 5, 0, do not work when I press them. Sometimes if I press the R key and Y or press them hard, with more force, the R and the Y will appear. Other times,

  • C50D-B-120 satellite and DVD player

    Hi guys wonder if you can help me. I was given this laptop for Christmas and noticed that it is not built in a dvd player. Is there anywhere I can buy one as I looked all over the internet and can find a?

  • How can I find the version and date of my Windows Firewall?

    As part of a form of declaration of Internet security, I need to provide the version and date of my firewall (Windows Vista firewall). How can I find it? I have tried everything I can think!