USB does not recognize not material

Similar Questions

• "USB does not recognize the device.

  After four years of working perfectly, my Acer Aspire with Windows Vista Home Premium has suddenly decided to generate warnings "USB does not recognize devices" for all external references except a network controller Linksys that needs to be changed around the ports to operate and has constant warnings "that works better on a 2.0 port." Advice please, very confusing Norfolk UK.

  See if it helps:

  "USB device not recognized" error keeps popping up and USB devices do not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-error-keeps-popping-up/6be4581d-8fbd-407F-815E-b475c35ca586

• USB does not not on my HP DM4-1265DX

  Recently, I had my motherboard replaced by Geek Squad to the laptop and now my USB does not work

  The two 2.0 do not work with any Plug that I put in my 3.0 only works with any type of USB. I tried to uninstall and updated the driver, updating the BIOS, check if the port was clean, reinstall Window (which was a pain waiting), reset the CMOS, reset the default Bios and see that I can't access the menu in Advance on my HP Pavilion dm4 because it doesn't have this option to unlock. Thanks in advance!

  Hello

  You did most of the troubleshooting of your end steps steps only takes a few steps are updated Bios and recovery. If you still have the same problem as you informed that Mottherboard has been replaced you must bring it to the Geek squad and have it checked could be the cause of the motherboard.

• Satellite Pro 460CDX USB does not

  I Sat Pro 460cdx with w2000 but my dose usb does not work. In Device Manager the port appear as unsupported nec pci to usb open host controller.

  And the port is not a driver?

  Any idea?

  Hello

  AFAIK This oldie is supported for the Windows 95 operating system. Have you had the same problem using Windows 95?

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB does not fit in the printer

  Have a deskjet 1050a and USB does not fit into the printer.  Help

  Thanks I found one.  Printer downloaded and everything got set up.  (except that it took me 2 days to do it).

• USB does not recognize my cd drive. I have a lite on ez dub. He arrived after the itunes update.

  I downloaded driver boost, but found no drivers.

  Hello
   
  1. you use an external CD drive?
   
  2. What is the error message/code exact displayed when you use your CD player?
   
  3. which edition of Windows that you are using?
   
  Example Windows 7 Professional 32-bit
   
  Please specify the problem you are experiencing.
   
  If you are facing this problem with the USB ports on your computer, then follow the links below to solve the problem.
   
  Method 1
   
  Tips for solving problems of USB devices
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  See also, update a hardware driver that is not working properly the above mentioned link.
   
  Method 2
   
  My drive does not appear in Windows Explorer
   
  http://support.Microsoft.com/kb/330140
   
   
  If the material you use is the same material that is mentioned below, then they are compatible with Windows 7 and do not need additional drivers to use.
   
  Windows 7 Compatibility Center
  Lite-On IT Lite-On IT LH-20A1PU EZ - DUB DVD burner

  Lite-On IT Lite-On IT EZ - DUB SOHW - 1673SU external DVD burner
   
  I hope this helps.

• OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

  After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

  Launch the center of solutions results in:

  HP solutions Center can not run because your device installation is not complete.

  Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

  I clicked the help button.

  1 said to confirm that the device is connected and powered. Click back to try again. No luck.

  2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

  3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

  Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

  I'm now able to print, despite the above experience.

  Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

  Does anyone have a solution for this?

  SOLVED.

  Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

  A later version of the software is available for this product.

  After downloading and installing, he recognized my USB printer connected and completed the installation.

  Now, I can scan.

  Panel, programs and features shows the version 14.0 rel. 6

  HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

• Devices no longer works, usb does not get detected, CD-ROM & CD/DVD-R do not recognize disc

  Original title: devices suddenly stopped working?

  All my devices (that I used a few weeks very well) stopped working.  Help please... I'm trying to upload pictures from my camera to my computer, but my USB is not detected.  My card is not detected.  And my CD-ROM & CD/DVD-R do not recognize the disc.

  Hello

  1. What is the brand and model of the computer?

  2. you receive an error message?

  3. all devices do not work on your computer?

  4. the Device Manager shows all the yellow icons for unknown devices? You have installed all the drivers?

  5. have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  You can read the following article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/?kbid=310575

  Method 3:

  You can read the following article.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• USB does not recognize the Garmin unit. Error "unknown device".

  Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:

  1. Reset (after all what I try)
  2. Turn off the computer and leave it unplugged overnight
  3. Completely uninstall all the drivers and the software associated with the kid.
  4. manual installation of drivers
  5. uninstall the unknown device and search for new hardware
  6. uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
  7. Go back to a restore point before updating the last windows

  Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.

  Thank you
  L

  Hello

  Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.

  See this article to fix the error code 10:

  http://support.Microsoft.com/kb/943104/

  You can also post this question to the garmin forums to get help.

  https://forums.Garmin.com/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyoard USB does not work after unplugging and plugging in (Windows XP Pro x 64)

  I had to move my computer then I unplugged everything, including the usb keyboard and mouse usb.

  The mouse and keyboard have no drivers as they are supposed to be plug-and-play.

  The mouse works well, the keyboard does not work...

  I get the message found material (found the usb keyboard) new then I tell windows to search for drivers but nomatter where I order, it finds no driver.

  There are all the correct drivers that are built into windows.

  Fabrice what connector on the motherboard, I try, it will not find the driver.

  Hello

  • What is the brand and model of the computer?
  • What is the brand and model of the keyboard?
  • The keyboard works on another computer?
  • The computer recognizes another keyboard, if hooked up?
  • The computer is running at startup and shutdown after loading Windows?

  Restore the system to a point when the keyboard worked.

  See: http://support.microsoft.com/kb/306084

• Toshiba still 8 Micro USB does not, does not charge

  I have installed Nokia PC Suite on my Toshiba Encore 8 tablet and connected my laptop Nokia C1 via micro-USB on my tablet.

  Since then, my Toshiba still doesn't recognize not the USB port, two usb devices or, more important, for the load.

  My tablet is now only 8% load, and I need to get the USB charge function working again while I have still a few charges left in the tablet to make the necessary changes (drivers, BIOS etc.)

  Can anyone help before my Tablet becomes a brick died without charge to the left?

  Hello

  Looks like we have a similar problem, although I have a different tablet model (AT10-A) and I did not install anything whatsoever... still, I'm having the same issue on the micro-USB port: it does not recognize the Chargers and USB connections with my laptop. To the point where it says 5% battery. I'll try to keep it connected to the charger, even if the Tablet does not seem to see it.

  How can I test if the battery is really in charge?

  Have you received support from Toshiba?

  Thanks and best,
  Luca

• Satellite Pro 6100: peripheral USB does not

  Can anyone help me please with the following problem.

  Satellite pro SP6100:
  After the computer starts, I get the error message USB device does not work correctly.
  I have nothing plugged into the USB port but I don't get the error message.

  Is there anyone with any problem and does anyone know a solution?

  Hello

  How rachelrising said it, it s a good idea to remove the device from Device Manager.
  After the reboot, the operating system should recognize the device again.

  Best regards

• Re: USB does not work on the Satellite A350

  I have a Satellite A350 and USB ports recognized the mouse, but no other entry. It does not recognize a USB drive or Logitech microphone or my Flip video.

  Anyone know what is happening? Thank you!

  USB controller drivers are responsible for these functions. These drivers are part of the chipset drivers. Try to reinstall/upgrade to update chipset utility:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  or

  http://www.MyToshiba.com.au/home

• USB does not

  I have a HP Pavilion dv6-6135dx notebook PC and the usb port back more away on good works. I just installed windows again after having lost all my data and after insalling most of the drivers I need, I can't get my usb ports to work. If I plug something in them they make my computer freezes for a second have audio lag and then does not recognize. What do I do?

  Hello:

  Here are links to the drivers you need:

  Bus SM:

  Download, unzip and install manually the smbus controller driver that I tied under attachments below.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  USB3: Download and install these two and restart...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125616_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI\HPQ0004:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96119-2&cc=us&DLC=en&LC=en&OS=4063&product=5118737&sw_lang=