USB drivers do not work properly.

Similar Questions

• Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

  The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

  It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

  It is very disturbing. Thank you.

  Hello

  have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

  If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• R500 + Dock + fingerprint USB keyboard does NOT work properly

  USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.

  (With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)

  R500 2732-6AG Vista Business

  Battery ThinkPad Advanced Mini Dock

  External USB keyboard with fingerprint 41A 5262

  Jochen

  New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader

  Click here to view the details of downloading new software.

  Click here to view the details of download for older software.

  On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.

• Satellite M40: USB Audio does not work properly in ACPI mode

  Hi all
  I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
  For this, the USB audio devices are an excellent solution.

  Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.

  After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
  This is a workaround.

  But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
  Actually, my laptop is no longer run as a laptop :(

  I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.

  This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.

  My question is:
  Is there a driver / updating bios that gets rid of this problem?
  If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.

  Thanks in advance.

  [Edited by: admin]

  Hello

  I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.

  Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.

  The computer ACPI PC Standard mode change is one of the many solutions and proposals
  You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
  Also change the performance options in the options of the system to adjust for best performance.
  Disable Windows messenger.
  Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
  In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
  Disable the peripherals such as scanner, printer.

  As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.

  Good luck

• Portege 7220CTe he's - USB dock does not work properly

  I have a portege 7220, with Dock he's using windows 98se.
  I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).

  Hi Buk

  Trust me on this path is not easy what's happening with your USB ports.
  Do you have similar problems if you use the USB ports on Portege itself?

  As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.

  I really put t think you will be able to solve alone.

  Good luck!

• USB modem is not working properly

  Hello

  internet usb modem 3 is installed, but when I connect to the internet, it will work for 3 to 4 minutes then stop working saying problem loading page, when I close the page I am always connected has a full signal.
  If someone could give me some advice or help on how to sort it would be great, thank you very much.

  Hello

  It is not easy to discuss with you. Why you didn t write what model phone you have and which USB modem are you using?

  Please post more information.

• Equium A60: USB Port does not work properly

  Hello

  I recently bought an external hard drive and every time that I plug it into a USB port it says

  'A trendy High - Speed USB device on a non-high speed USB hub'

  I guess I need to download a host controller driver, but I can't seem to find one not where does on have an idea what I can do.

  It is an Equium A60

  No info would be appreciated cheers

  Hello, SK

  I found an interesting technology high speed USB article.
  Please take a look at this site:

  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  Good bye

• the drivers of my usb ports do not work

  I have purchaced new hp sleekbook os-win8, but after only a few days the usb drivers do not work what shoud I do

  What you plug into the usb port.

  Have your tried several devices?

  When was the last time they worked?

  Try to remove the drivers in Device Manager.

  Then restart and let them reinstall

  In the event of failure of the test a system restore to earlier date when they work.

  Here's how to do a system restore

  http://www.YouTube.com/watch?v=CsY_FnyJzdo

  ___________________________________________
  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Front 2 USB not working properly

  So I got my Erazer X 510 for about 5-6 months and my USBs in front of 2 do not work properly. The blue, I think that USB 2.0, works for the load, but whenever I put something she says even the Description of the device of the request has failed. One yellow, I think that 3.0, does just not all. Does not load, not a not my USB headset the light, stuff like that. They have all both stopped at literally the same time. There are 240 days left in the guarantee of duration.

  I agree with the suggestions of the Majestic...

  A few other things you could try would be to go to Device Manager and see what it says about the State of the USB device.

  You could also download and run Lenovo Solution Center, our diagnosis package and see if he can identify problems with the USB system.

  Mark

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A yellow "!" box-tcp/ip protocol driver - this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  TCP/IP protocol driver problem

  A yellow "!" box-i.m running windows xp professional, tcp/ip protocol driver service pack3(32bit), when i open hidden under drivers not Plug-and-Play, on the general tab of properties I receive, this device is not present, is not working properly, or does not have all its drivers installed. (Code 24) when I hit the Start button I get, (the system encountered the following error trying to start the service) "the specified driver is invalid" this error prevents me access to internet please help, unfortunately I n, have a cd of xp pro.installation. but I have a dell xp home edition reinstallation cd, any help would be appreciated.

  Imran, sorry for not having a back earlier, thanks for your reply, I got an installation cd and a clean installed which sort the problem.

  Kind regards

  dermotk

• Windows xp reportsThis device is not present, does not work properly or does not have all its drivers installed. (Code 24)

  in the device under the non-plug-and-play drivers Manager... it has a yellow question mark next to this "MpKslb71170d2" I have no idea what it is.

  the error code is 24 and is shown below

  Windows xp reports "this device is not present, is not working properly or is not all its drivers installed." (Code 24) »

  the choice, it gives me is to disable or uninstall... What is this error, what device, what should I do?

  Same computer as in this other thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/protect_updating/the-red-shield-is-on-my-microsoft-security/9243c546-aa6d-46cc-8780-2ac040a52e35

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us