USB Flash drive not working no-V112b

Similar Questions

• USB flash drives not error 39 working -.

  Original title: USB flash drives doesn't work do not

  Hello
  My USB flash drives do not work in one of my USB slots. All other USB devices work correctly.
  Device Manager displays a yellow triangle with an exclamation mark next to the hard drive
  Have tried to update the drivers but points out the best drivers already installed.
  Connection drive after that a restart prompt message "driver installation", followed installation failed, error 39.
  I installed the latest drivers for the chipset of my Board.
  I have the Nations United-mounted and re-installed readers all affected.

  Grateful for the help, please.

  conx82

  Hello

  Have you tried the thumbdrive in another computer to be sure that it is still viable?

  ----------------------

  Try a restore of the system back to until the drive disappeared.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances. (There may be none.)

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to get the USB flash drive to work

  I have a new Satellite L500 with Windows 7 and it will not recognize/install the USB flash drives. A msg comes up saying "software device driver has been properly installed. I tried several flash drives - they are OK & work on other machines - including an another Toshiba running Windows 7.

  Other devices work in the USB ports, so the ports are OK.
  Windows cannot resolve the problem, I have checked all USB drivers are updated in Device Manager & made a system of analysis of file without success.
  The Bank recommended a reload & restore factory default - other options?

  Have you installed driver chipset?
  Your laptop comes with Vista or Win7?

  You have just upgraded to Vista or Win7 clean setting?

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Why is my 64 GB USB Flash Drive "not a backup location valid?

  I tried to turn it to a previous question, but reading of the Code of conduct for this forum, I discovered that it was inappropriate to do that.  My apologies for this.

  I am running Windows 7 Home Premium 64 - bit SP1, installed using Toshiba recovery disks (I have a new Toshiba laptop, when I got the system I opted to not have a recovery partition).  I just cleaned all the bloatware off Windows, ran Windows Update until there was no more updates for (achieved in this way SP1), and now I have a fresh and clean windows installation, which has never even been to a single Web site.  Now, I am trying to create a system image on a 64 GB flash drive (I won't even finish by using half of it, as my SSD has only about 19 GB used, and which includes the hibernation file (I disabled the pagefile, because paging files are unkind to SSDs))

  Before, I asked if it was possible to manually create a System Image of Windows 7 on a USB Flash drive (big), and I got two answers 'Yes' to two stars of the community. (See my question here)  It is also stated that it is possible on windows.microsoft.com, here.  Note that when windows.microsoft.com stipulates "the system image must be saved on a hard drive, reference is made to automatic creating system images.  If you keep reading, you'll see that the page says that if you want to manually create a a system image, this image of the system may be recorded on optical discs, a USB Flash drive or a hard drive.  If it is possible, then why will I have the following problem?

  64 GB USB Flash Drive inserted--> closed Autoplay dialogue--> Opened "My Computer"--> Right-clicked drive E (my flash drive) and the selected format--> Unchecked 'Quick Format'--> size of the NTFS system chosen and 4096 bytes of cluster--> Clicked 'Format' and acknowledged that all the data will be deleted--> waited a while for the form to fill out, then clicked OK--> closed 'My Computer'--> ejected my flash player by clicking on 'remove hardware safely'--> physically unplugged flash drive--> Grabbed a diet coke with ice--> inserted 64 GB USB Flash drive--> AutoPlay dialog closed--> opens the start--> Clicked "All programs" Menu--> clicked maintenance--> click Backup and Restore Center--> clicked on create System Image--> (scans of program for storage devices)--> my flash drive appears under "on a hard drive" and the words 'the drive is not a valid backup location' appear under my FlashDrive being listed.  For reference, "on one or more DVDs" appears just below the text saying "the drive is not a valid backup location."

  My understanding is that what I just tried to do is create an image of the system on an NTFS partition formatted (with a 4 KB cluster size) 64 GB USB Flash Drive.  But it is not letting me!  I understand that I can't plan the creation of automatic system for USB Flash drives, but according to windows.microsoft.com image and two stars of the community, it is indeed possible to "manually" create a system image on a large USB Flash drive, which I think is what I just tried to do.  If there is another way to create a system image, even more 'manually' than what I do (I'm certainly not afraid of the command line, if I need to use it I'm more than happy to do so), please let me know.

  I have a low-quaility SATA 3.0 Gbit/s notebook HDD in an enclosure USB powered bus at low prices, and I was able to create a system on that image.  However, I expect this device to fail shortly.  I also managed to create a system image on a DVD-r virgins.  I did, however, just spend $85 on a 64 GB USB Flash Drive specifically to store an image of the system, which I expect to use to back up Windows 7 with World of Warcraft installed (total size of drive C will be approximately 50 GB; I have not yet downloaded WoW; "I want to overcome this first).

  Any ideas would be appreciated.  Thank you!

  1st edit: adding links so people would not need to copy and paste to their address bar and said the last sentence of the last paragraph.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.

  CNET has a lot of reviews of backup program to

  http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar.

  Some of them are free (the last time I checked there are 315), some have free trials (more), and some are buying only (more than 200).

  Good luck.

• USB flash drives not detected on the Windows XP-based computer

  Original title: flash drives

  I have win - xp on a dell 2400 platform its flash USB 2.4 G & 533 Mhz. readers and cameras are no longer rec. of my USB ports on comp. I formatted & restarted win - xp on the computer to fix this problem without success. Can anyone help?

  Hello

  1. what exactly happens when you connect USB devices to the computer?

  2. you receive an error message when you connect the USB to the computer?

  Check the status of the USB device in Device Manager:

  a. click on start

  b. click on run

  (c) in the Open box type devmgmt.msc

  d. in Device Manager, expand universal serial bus controllers

  e. double-click the device and check if an error message or error code is listed

  Method 1:

  You can run the fix provided in the link below it to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2:

  Remove and reinstall all USB controllers

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Why are usb flash drives not NTFS formattable?

  Hi I have a few usb2 flash drives. Is there a reason they seem to not format it in NTFS? I can only select FAT32. I have maybe more old stock... Win XP Home SP3 and Vista Home Premium 64 - bit SP2.

  I have:

  -Lexar JumpDrive VE: 8 GB - reading 12 MBs, write 3 MBs

  -Sony Micro Vault Click (USM16GL): 16 GB - reading 18 MBs, writing 5 MBs

  -Patriot Memory bolt-

  PSF32GBTUSB: 32 GB - read 30 MBs, write 12 MBs

  Are SSD drives in the same way? I thought that SSDS have been NTSF.

  Thank you.

  First of all, the format is NTFS, not NTFS.  Secondly, it should be no reason why you shouldn't be able to format as NTFS drives - I just grabbed one of mine to random (8 GB PNY) and was able to format to NTFS.  You may need to use disk management to remove existing partitions first.

  'Brian V V' wrote in the new message: * e-mail address is removed from the privacy... *

  Hi I have a few usb2 flash drives. Is there a reason they seem to not format it in NTFS? I can only select FAT32. I have maybe more old stock... Win XP Home SP3 and Vista Home Premium 64 - bit SP2.

  I have:-Lexar JumpDrive VE: 8 GB - reading 12 MBs, write 3 MBs

  -Sony Micro Vault Click (USM16GL): 16 Gb - read 18 MBs, writing 5 MBs - Patriot Memory bolt-

  PSF32GBTUSB: 32 GB - read 30 MBs, write 12 MBs

  Are SSD drives in the same way? I thought that SSDS have been NTSF.

  Thank you.

• x 61 does not start from usb flash drive

  I don't know that I did several times before, but for some reason any my x 61 does not allow me to boot to a usb flash drive, I use normally to install the operating system.

  Any suggestions what might be wrong and what I could do about it?

  I should mention that USB is enabled in the BIOS and usb flash drive install works on other computers.

  Update seems to be an incompatibility with wintoflash, I used the Microsoft DVD/USB tool and it starts the flash player and finished the installation. Strangely the wintoflash installation worked fine in a HP dv3000.

  Consider this resolved.

  Wow I never saw your post until that earlier.

  Situation is resolved in the first post

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• USB flash drives do not work

  Hi all

  I have a couple of USB flash drives. I recently got a new computer and none of them work. They work on a computer with Vista and a Macintosh running leopard OSX. I tried to install the drivers for them, but they do not work. I tried to uninstall the from Device Manager, but they don't always work. Also, one of them appears SOMETIMES (very rarely) and when he does works incredibly slow and unresponsive so. I searched the internet for each method I can find, but nothing yet. And they work very well on other computers. Can I use bluetooth USB and a USB mouse and pregnant too much work, but the sticks of memory will not work. Also do they not appear on Device Manager. I have Service pack 3 2002 edition came with the computer.

  Hello Hasan516,

  Thank you for your message.  Have you tried formatting of thumb drives?  If you have data on them, you will need to copy these data to a computer first.
  If you can see the drive but not access it under XP:
  Open 'My computer' > click the drive and select "format...". »
  When the Format window opens, scroll down the "NTFS" file system, and select 'start '.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Some USB flash drives REFUSE to work in this 40TL963B

  Hi all. I recently bought a new 40TL963B and so far I have found nothing wrong with her.

  Except that... when I listen to it all the Satellite channels, I noticed thay were very different from my FreeSat box. Duplicate the layers, randomly arrested... etc. It made me want to not use the built-in satellite feature.

  However, I found a program called ToshibaEdit which allowed me to manually change all the digital channels on the TV. Grand... I though. Until I met this problem-->

  Inorder to change the ads, you must copy the TV channels on a USB flash drive, you can edit them on your PC. Now, it took me AN HOUR to do, because of two flash readers I used, none of them worked... I kept getting a "Write Fail" error. WTF?

  The disks are formatted in FAT32, one is a 8 GB is 2 GB.

  Finally, I tried an external 2.5 "USB 120 GB hard drive. Even if the disc is defective... This WORKER. I expect flash drives to work, to be honest, but all of them... the external USB hard drive worked.

  In any case, I spent another hour sort channels, until I was ready to transfer the data back. And. Yes... the same problem. This time, I received an error "failed to read". Again, tried the external USB HDD... worked the first time.

  Now, this HARD drive is faulty, so he'll be thrown... so I'm going to need a flash player to do it again if something happens.

  And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE? In addition, the same flash drive that I tried to copy the data from digital channel with was also used for a backup of the Firmware... and it WORKED perfectly. It works also for use with the media player.

  While this TV has a hatred of Flash drives all of a sudden?
  Anyone can shed some light on this?

  In addition, very quickly, TV seems to lose its TV settings every time that I bring the TV out of Eve. I'm going to the TV Dynamic and adjust all the settings, but he returned to AutoView and all settings back to 0. Is it a fault or is there something I need to do to 'save' the settings per channel?

  Any help at all will be appreciated greatly.

  Hello

  > And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE?

  AFAIK the 40TL963B TV supports a common HS USB 2.0 interface and memory flash can be formatted in FAT16 or FAT32 file system. So there is no specific requirement for USB flash memory

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• Windows Explorer stops working whenever I have connect a USB flash drive and try to access

  Hello. I use Windows Vista.

  I had a particular problem. Whenever I have plug in a USB key and try and access it, I get a pop saying "Windows Explorer has stopped working." the file is closed. If I wait a long time (i.e. 10 seconds), I might be able to get into the drive without any problems, but even when there is no guarantee. The problem persists in each USB slot I use. In addition, it is not that the computer is not able to detect it. It can detect and identify that it is a USB flash drive. It's just that whenever I try to access (or the folders inside the flash player), windows Explorer stops working and restarts.

  Does anyone have this problem before? And any help is appreciated. Thank you.

  The mistake made reference the MSVCR80.dll, which is a Microsoft file, but it may be another third party file, causing the problem.

  DivX is installed?

  If so, can you uninstall DivX and see if the error resolves.