USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

Hello

It is brand new USB STORE 1, 5 t 3.5 "disk.

Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

1 is this normal behavior?
2. What is the meaning of red light when the drive is working?

Thank you in advance.

Hello

I m no owner of this HARD but I have a theory.
According to your information, I think that the red light only appears if data would be written to the HARD disk.
The blue light appears during the reading of data from the HARD drive.

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite A300-1EC - how to start openSuse Linux from USB HDD?

    Using the desktop PC, USB HDD was installed openSUSE. The computer starts from USB HDD fine. On the laptop installed windows 7. I tied USB HDD for notebook and laptop computer reboot, select by pressing F12 boot USB, but the HARD drive loading specifications internal (WIN 7).

    What I've done wrong? How can I boot from USB HDD?

    Hi aliks-os.

    I m not owner of the Satellite A300, but maybe that it doesn't support boot from USB HDD...
    Connect the HARD drive before you turn on your laptop. Then turn on your notebook and press F12 to access the start menu.

    The USB HDD is listed? Can choose you?

  • Stor.E USB HDD PX1399E - 2 20 - light continues to flash red / blue

    Stor E usb hdd, no access that passes light continues to flash red/blue, which means?
    (constant alternating red/blue 2 x / sec., and not not not flashing as read/write)

    * RESOLVED: * already tried several cables, also with dual usb (Y-cable).
    the solution was a cable with an interferencefilter close to the HARD drive.

    Post edited by: borel

    > RESOLVED: already tried several cables, also with dual usb (Y-cable).
    > solution was a cable with an interferencefilter close to the HARD drive.

    Thanks for your comments!

  • Toshiba USB external hard drive 250GB shows only the red light - sound of rattling

    My USB HD external drive to Toshiba aged 16 months stopped working yesterday. It shows just a flashing red light
    and makes a slight clicking noise. Of course, we cannot guarantee any more. But all my backups are on this drive,
    This means almost 10 years of work destroyed if I cannot access this disc more. Someone knows what to do to fix
    This problem?

    Post edited by: admin

    I put t know what the flashing red LED could mean, but it looks like a HARD disk head crash. Perhaps you could find some details in the user manual that the flashing light means.

    However, he still stupid s cases of dysfunction of a backup media situation. I had a similar problem with my 2.5 100 GB USB HDD. After about 3 years of work, the HARD drive died and I was not able to access the HARD disk. I was a lucky man because I have backup my data also on the DVD so I was able to restore the files and data.

    What to say maybe s possible to save data, but professional help would be necessary. Maybe you should contact technicians for assistance.

    Best regards and good luck buddy

  • 250GB USB external HARD drive - red light then flashing blue

    Hi all

    I have a Toshiba 250 GB external USB HARD drive which has just stopped working. It has a red light with a steady blue light flashing.
    I can't access the HARD drive in my computer.

    Any ideas?

    Help much appreciated!
    Whiley

    No do you have ideas on this?

    If this isn't the case, someone at - it ideas where I can get the drivers for this device?

  • HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

    Hello

    I have a HP Z620 workstation.

    My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

    I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

    I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)

    My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)

    Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

    With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

    My problem:

    1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

    2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

    3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

    4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

    Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

    Thanks in advance for your time.

    MR. J.

    Juggerknight,

    Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

    In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

  • Blackberry Curve 8520 Smartphones BlackBerry turns on, no red light

    Hi guys, yesterday evening I took my SIM card and put a new back in my phone (replacing a defective) and when I went to back based on what I have got a red light solid for 2 minutes then nothing else.

    I watched it on here and saw a response on "Raise" (2 hours plugged, remove the battery for the refit of 15 minutes and leave for another 2 hours) but no, it does not work, tried to change the batteries, nothing also tried to plug into the PC using the desktop software and nothing comes up to be there  :'(AIDER!)

    Thanks for your Post... !!

    Hope USB cable you are using is correct... !!

    Please get that he checked the nearest Blackberry to a qualified service center, because it seems that material related question...!

  • BlackBerry Blackberry Storm Smartphones - does not light (red light)

    Hi all

    Recently, I dug my Blackberry Storm out of his box and tried to use it again. Unfortunately, it not light.

    I can plug it into my computer (Mac) and the red light comes on. He will stay on until I open the Blackberry Desktop Manager how the phone starts a cycle of rebooting. Every now and then it stops on a symbol of the battery with a slash through it (are there no battery in the phone), but the second, I try to connect to it via the Blackberry software it restarts again.

    I tried the JML encoder or whatever his program called and every time it tries to connect to the phone, the phone restarts.

    This is as far as I know:

    Carrier: Verizon

    Phone: Blackberry Storm (to 2008)

    Computer: Mac

    Program: Blackberry Desktop Software 2.4.0 (Build 17)

    My phone is out of warranty and since he began to send me in trouble in 2009 I switched to Android. I've never had a problem with Android, so I forgot to go back and see what was wrong with my Blackberry. I hope someone can help out me. I can't really 'take to verizon' because their solution is swap out today just for a working one, but since it's out of contract. / warranty, they will tell you simply throw me. I live in Los Angeles, perhaps someone someone actually knows phones Blackberry of PATCHES. I know it's a new idea.

    Thanks, I hope someone can help!

    In your situation, a 507 is actually a good thing... 507 means that the BB has no OS installed in it, but at least it turn on now.

    I don't know how do to recover it through MAC... all of the stuff I know applies to the PC. You might find some MAC-specific help in our MAC-specific forum:

    • supportforums.BlackBerry.com/T5/Desktop-Software-for-Mac/BD-p/blackberryformac

    Everything what I've heard, none of the stuff to get over this is for MAC, so if you have access to a Windows PC, you can perform the following procedure, which removes as "automatic" search/download OS that fails on your MAC and replace it with what you control:

    1) uninstall all the BB OS packages from your PC,

    (2) make sure you have the BB Desktop Software already installed

    (3) download and install to your PC, the BB OS package you want:

    4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

    You may also use these tips:

    Good luck and let us know!

  • Smartphones blackBerry BLACKBERRY DO if ON - SOLID RED LIGHT - HELP!

    About 2 days ago my blackberry had a dead battery until I fell asleep and I thought that I would let load until the morning (because my charger to wall button/doesn't work properly). When I woke up the battery had drained completely, because my charger did not work properly, I decided to charge via USB on my PS3. After leaving it loads for an hour, I checked it and it had not yet charged 1 bar? I had to leave to go out so I took it out and while that use it empty battery again once. Now, I tried to load it via computer and a solid red light appeared stuck.

    I then tried another battery friends in my phone and realized it was working, so I thought to buy a new battery would solve the problem.

    I then went to buy a new battery for an asain man (an unofficial) downtown, went home loaded on my ps3 and have full battery and it was working fine, then suddenly in the night the battery started to drain very quickly, when he arrived at the yellow on battery, he went to a white screen off and empty. tried to load again on my ps3 and it showed the solid red light and does not turn on...

    Help?

    The original is the best to use because it lasts longer than the Chinese even if the price of an original is too high. As for the charging via USB, that there is no problem, mine I load via USB to the office and use the wall home charger.

  • BlackBerry 8900 smartphones will be no more power up and a red light blinks!

    I have a new 8900 and put in place all OK.  It now will not power and all I have is the red light flashes intermittently. Have tried removing the battery but no joy.

    Someone at - it ideas please?

    If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

    (1) make sure that you have Blackberry Desktop Manager installed.
    http://NA.BlackBerry.com/eng/services/desktop/
    (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

    'c:\program files\common research in motion\apploader\loader.exe' /nojvm

    (3) the Application Loader Wizard will appear - click on "next".
    (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
    (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.  Just unplug and let the process finish completely.

    NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
    http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  • Smartphones blackBerry phone lights. the red light.

    So my blackberry was fine when I went to sleep. woke up and it was off a reason any. I tried to turn it on and it wouldn't. I removed the battery, it reintroduced after a bit and the solid red light came. After a while he went off... then nothing... nothing on the screen.

    HOW SHOULD I DO?

    Before you do anything else, do the following:

    Leave the appliance to charge 2-3 hours and then, still connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

    If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

    (1) make sure that you have Blackberry Desktop Manager installed.
    http://NA.BlackBerry.com/eng/services/desktop/
    (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

    'c:\program files\common research in motion\apploader\loader.exe' /nojvm

    (3) the Application Loader Wizard will appear - click on "next".
    (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
    (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

    NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
    http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  • USB HDD is not available in the comments (XP)

    USB HDD icon in the 'system tray' merge and hover above him, I get "Disconnect Western Digital hard drive", which is a correct list of the device.  However, I am not able to browse the HARD drive.  Does not appear in the 'readers' work stations.  It is listed in VM settings and the box is checked, as is "enable USB 2.0 support" and "automatically connect USB devices.  I also edited the VMX file to add the following parameters:

    "usb.generic.allowHID ="TRUE"

    usb.generic.allowCCID = "TRUE"
    

    or what improvement in the situation.

    appreciate any help.

    billorr99 wrote:

    USB HDD icon in the 'system tray' merge and hover above him, I get "Disconnect Western Digital hard drive", which is a correct list of the device.

    VMware Fusion does not a "system tray" but the Interface of VMware Fusion has a status bar.  Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > navigation in VMware Fusion > overview of the Interface of VMware Fusion

    However, I am not able to browse the HARD drive.  Does not appear in the 'readers' work stations.

    There all the devices in the Device Manager Windows and more specifically under Bus USB controllers?

    How is the formatted USB hard drive, FAT32, NTFS, or Apple HFS +?

  • I have no sound coming out of my macbook pro and see a red light in the hole of the listener.

    I do not have its coming out of my macbook pro os x 10.8.1 but if an earphone is connected I hear the sound and there is a red light through the matter of earphone. What is happening to you can help me?

    The red light of the headset jack means the MacBook Pro thinking that an optical audio cable is plugged into the port. Try to have disconnected and reconnected a headphone plug into the port several times. There is a tiny sensor inside the port that determines if the port is operating in analog or optical mode. Something similar by plugging should trigger the sensor and restore the analog signal.

    If you don't feel capable in doing so the folks at Apple Genius Bar will be able to help.

  • keep the red light of the research of e-mail messages

    Just red light will not stop looking for e-mail messages, despite the fact, I set the preferences to search E-MAIL when I'm trying to find something on my Mac. What is happening with this?

    MacbookPro, mid2010,

    with the help of el Capitan (but in fact, this has been a problem in previous versions as well and I'm just fed up with it once again)

    don't know why she filled in saying I'm on the Mavericks. have updated to El Capitan

  • Message: External USB HDD needs to be formatted.

    Hello

    When I insert wire USB hard drive it says that the device must be formatted
    Then I clicked on the format, it gives me a message that the drive is not connected properly.

    Recently I inserted as an icon appears in the windows taskbar.
    When I clicked on it gives me a message to one of the usb ports below is not working properly.

    Messages while windowsc7 os, but it will not be because it is exactly as it is in the English edition, because mine is Arab.

    Hello

    > When I clicked on it gives me a message to one of the usb ports below is not working properly

    To me, it seems that you have a problem with the USB port and the computer does not recognize the USB HDD correctly.
    The USB HDD works correctly on another computer?

Maybe you are looking for

  • IPhone locked

    HI, I have a question, I bought my new 6s of Iphone on the black market, but I can't open it, it says that I must write in icloud because it is locked before. I entered my address itunes but it doesn't work. I need help because I dreamed so that phon

  • defects of memory - full boot disk but nothing to delete?

    2.53 GB free of 59.44 Go and get "Startup disk is almost full." 43,62 GB OTHERS 11.26 GB APPS PHOTOS OF 1.61 GB 310,3 MB AUDIO MOVIES OF 97.8 MB BACKUPS OF 8.7 MB I can't find anyway to know what OTHER there or even remove it. Even after the apple a

  • Connect to wifi without Internet

    How can I connect my ATV 4 to my home WiFi network if the WiFi doesn't have an Internet connection? I just moved house and the new internet connection is at least 3 weeks. I would like to be able to use my Apple TV at the same time for related functi

  • You want to buy a copy of the upgrade to windows 7.

    You want to upgrade my windows XP computer to windows 7. I found the link that I can buy. Question: this outfit sells copy of the upgrade to windows 7? (Don't want to get cheated and lose my money.) http://www.softdirectworld.com/Microsoft-Windows-7-

  • Logging in on a 5525 ASA IPS module

    Hi all Quick question here. I have a new ASA 5525 - X with IPS module. The PPE must be configured as an ID and told me that without fire view management controller, we can apply a license. I have also told me that with the 5525, we cannot install log