USB - If xHCI USB host controller driver problem

My new Windows 8 in Sony VAIO found the problem with the USB - IF xHCI USB host controller driver, who couldn't reinstall Windows. What should do? I have not done the recovery discs! Please answer...

Thank you

I saw this post today and the information provided helped me to solve this problem.

Click here
The link essentially says to visit the Intel Web site and use the Intel driver update utility. The utility automatically searches your computer for devices that are eligible for an update. Hope this helps you because it has helped me. Also I have updated my wireless driver while I was using the Intel drivers update utility as a newer driver has recently been made available.
It worked for me; However, I ended up having to uninstall the old drivers Intel WiDi, then by restarting my computer before the setup.exe file would go and install on my computer (dell inspiron). I created a restore point in case it did not work, but everything seems to work smoothly!

I must also stress that just remove the driver Intel WiDi also got rid of the yellow exclamation, and unless you plan to try to connect wirelessly to your computer to your TV, I don't think it's something you need. Here is a link that explains what is the driver:
http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display.html

Tags: Windows

Similar Questions

  • MISSING USB - 15 xHCI USB HOST CONTROLLER driver for DELL INSPIRON 15

    I need to obtain an updated driver for this device and my Dell Inspiron 15 has problems, it's less than a month. Why are there problems with USB and PnP drivers, why? I also need to fix or an updated driver for the PnP, unless it is a part of the USB controller. Urgent please help!

    NF

    Have you tried support.dell.com?

  • T42 - USB + biometric controller driver problem

    Dear community,

    This is my first post desperate, after talking to Lenovo technicians yesterday for more than 2 hours.

    That's happened?

    I sent my T42 (2373-H6U, teacher of XP SP2) in and Lenovo BIOS update, replaced some plastics etc...

    Last Thursday, I tried to move some data on my external hard drive, and it seemed to take forever. So I decided to restore the factory settings and did so yesterday. However, it still seemed that I have USB speed issues (in the Device Manager, the system recognizes the USB ports, but the speed is 1.1 instead of 2.0, who she was before sending them in.) and windows did not recognize the drivers of biometric processor...

    So what I did, I

    USB:

    -ran PC doctor and he says that this usb device is not installed...

    -installed the chipset intel... http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-46058

    -tried to install this but works not because it does not work on my system... WIN NT 4.0: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4TQVCU

    What now?

    BIOMETRIC processor:

    -anything yet, because I have not found a driver...

    Bottom line:

    Lenovo said drop it again (still under warranty) but I have to LEAVE THE COUNTRY TUESDAY FOR a YEAR AND THEY DON'T want TO SHIP overseas!

    Maybe one of you can enlighten us on that.

    At soon Barthezz

    I'm sorry to say you need to send the machine. The Southbridge chip on the motherboard is a failure and the Board needs to be replaced or the chip in a re-ball. Good luck.

  • HP ENVY Ultrabook 6-1106tx: USB - IF xHCI USB Host Controller problem

    Dear Sir

    I hope you will be fine. My name is Rana Imran and I use HP ENVY Ultrabook 6-1106tx with Windows 8.1.

    I think I have the USB - IF xHCI USB Host Controller driver problem. I send you pictures of the problem. Please solve this problem.

    Thank you

    Hello

    The first suggestion I want to do is to download and reinstall the switchable graphics driver on the following link as it lists a fix for WIDI.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114949-1&cc=us&DLC=en&LC=en&OS=4158&productOid=5317668&sw_lang=

    When reinstalling com [full, restart the laptop.]

    If you find that this did not correct the problem, try the download from Intel on the link below.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23861&lang=eng&ProdId=3227

    Kind regards

    DP - K

  • DRIVER_POWER_STATE_FAILURE & USB - IF xHCI USB host controller problems

    Greetings,

    Recently I've known APC with pilot failure current state every time I try to turn it on or reactivate my new Zenbook from ASUS. It takes forever so she actually turn on which is also a new problem. I tried to run a Windows troubleshooting from the center of the action and he said that there is a problem with the USB - IF xHC USB HOst Controller driver. He recommends that I re - install this driver, but does not give me the opportunity to do so. I am downloading a link to my Minidump with the hope that someone could help me.
    Minidump SkyDrive link: https://skydrive.live.com/redir?resid=2FA3EA1D7C87B0CD! 300 & authkey =! AMQqBm28WoEP7Jk
    Thank you in advance.

    Just to add to the excsd.sys advice of zig - zag seem to be also involved in the accident:

    1: kd >! devstack fffffa80046e97f0
    ! DevObj! DrvObj! DevExt ObjectName
    fffffa80051738a0 \Driver\partmgr fffffa80051739f0 InfoMask field not found for _OBJECT_HEADER to fffffa8005173870

    fffffa8005172880 cannot load image \SystemRoot\system32\DRIVERS\excsd.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for excsd.sys
    ERROR: Module load completed but symbols can be loaded for excsd.sys
    \Driver\excsd fffffa80051729d0 InfoMask field not found for _OBJECT_HEADER to fffffa8005172850

    fffffa80051dd060 \Driver\disk fffffa80051dd1b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset fffffa80046e75d0 \Driver\ACPI fffffa8003bfb590
    > fffffa80046e97f0 \Driver\iaStorA fffffa80046e9940 cannot read the offbeat info from nt! ObpInfoMaskToOffset

    The excsd.sys is a component of ExpressCache.

    The same laptop with a similar error has been reported in the following thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/driverpowerstatefailure-Windows-8-Pro/572259fe-7525-4056-ABAA-1868286e3018

    As in this thread study ExpressCache uninstall, update the driver of the TSRI and then, if you wish, reinstall the latest version of ExpressCache.

    ExpressCache is not a required software, you do not have to reinstall if uninstall you.

  • USB - if USB Host Controller xHCI emits...

    I have trouble with the USB - IF xHCI USB Host Controller driver. It is said, that it must be reinstalled, but reinstall does not work.

    Any suggestions?

    I have ASUS laptop computer n56vz with built-in USB 3.0 ports. I tried to reinstall with windows Setup Manager. Nothing of above mentioned helped (I try Method 3: check if you are using the Fresco Logic FL1000 USB controller).

    Then I deleted the USB - if xHCI drivers controller USB host and nothing seems to be a problem at the moment. There is no errors and the detection of material shows any new hardware devices, which I find very strange...

    Thanks anyway for your help and messages. I know, if there will be problems with the dirvers clear.

    Best regards!

  • USB-IF xHCI USB Host Controller problem

    I am using Asus UX32VD and there is a problem: USB - if xHCI USB Host Controller is not working properly. I tried updating the driver from the Device Manager, but the problem persists after that it has been updated.

    Seen a few threads on the site but I don't know if the solution is the same throughout the of...

    Thank you

    Hello

    Try this and let us know if you are still having a problem.

    Use this link and run the Intel Driver Update utility

    B Eddie

  • FAILURE of STATE DRIVER / USB - IF xHCI USB HOST CONTROLLER

    My ASUS Zenbook UX32VD takes 10 or more minutes to start and just to display a blue screen with the text of "an error occurred...". DRIVER_POWER_STATE_FAILURE.
    The tha solutions technical support gave me did not work
    (Restart the factory system and lose all my programs... ¬ twice)

    After travel a lot, I found a video (youtube. com/watch? v = QYY2IHpI8Ow), the guy says, the problem is caused by the driver of a device

    But the driver that represents a yellow mark is of the WiUSB from Intel, USB - IF USB HOST CONTROLLER xHCI (I Don t know what - this, sorry for my ignorance, but I just know I do not have any device USB D :))
    I tried to update automatically, but just what the latest version shows...

    I don't know what to do, I've tried everything!

    (Sorry for my English)

    Hello

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate Windows 7 methods and use them on Windows 8.

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows (applies to Windows 8).
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if you make them available at the SkyDrive or other
    file     -sharing sites (such as MediaFire). If you have problems downloading the minidumps
    Copy it to the desktop or Documents folder and download them from there. (This is
    Likely NOT of great help on new construction).

    ZIP or download the content of the C:\Windows\minidump (only once you have made
    suggestions initials at the top of this answer and IF the BSOD problems).

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7 and 8)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ==========================================================

    This "might" be a power problem, even if it's not the most common cause.

    9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
    Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
    see if a driver has been updated before that happens. This can also be caused by a loose card
    or cable and even a weak power supply.

    This error means that a driver does not properly support the power state. Check in Control Panel-
    Device to be sure management of great drivers are stopped not for sleep - double-click on display
    Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
    computer to power off. Maybe the only has a problem.

    (Use EXECUTION instead of start - search such as used on Vista or Windows 7)

    WINDOWS key + X - RUN - type MSCONFIG.exe

    General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

    Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
    (and it might still be video interacts with something else). See link to the troubleshooting tool
    above my generic driver update methods.

    Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">
    http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspx

    BCCode: 9F 0x0000009F<-- read="" this="">
    * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

    ------------------------------------------------------------

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    --------------------------------------------------------------------------------------------------------------------

    It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)

    This utility, it is easy see which versions are loaded: (VIEW of the value for hide Microsoft drivers
    (-update those without drain in their names.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now click on
    Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
    Click on - uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Microsoft - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • USB - IF xHCI USB Host Controller

    Hello

    I found the USB - if xHCI host USB in Device Manager not compatible controller and the error is (this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)).

    The operating system is Windows 8.

    Please yor need support to work this device correctly.

    I want you to know I solved this problem on my 7200 DV7T. I downloaded the latest drivers from Intel's WiDi:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 22016 & ProdId = 3227 & lang = eng

    These seem to be more recent than those provided by HP. I have installed all drivers you first (display, chipset, etc.), then I installed the WiDi software (link above). The USB - if USB Host Controller xHCI has been recognized very well. No more unknown device.

    I hope this helps.

    Jim

  • WARNING if USB xHCI USB Host Controller

    Hello

    I have a warning on the Device Manager with Intel WiUSB (USB - IF USB Host Controller xHCI).

    My OS is Windows 8 x 64 and my model ThinkPad Edge E3300

    Could you help me?

    Thank you

    Solution listed at this link: get essentially driver updated to Intel's WIDI.

    http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/brand-new-twist-S230u-2-unknown-devices/TD-p/9707...

  • USB 3.0 AMD host controller driver will not install.

    The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

    Any ideas?

    Hi Felix,.
    Thanks for the reply.

     
    Have you tried the methods suggested earlier?
     
    Refer to issues related to the printer:
     
    Solve printer problems
     
    Download and install the latest drivers for your printer from the manufacturer's website.
     
    I hope this helps.

  • is it possible to install USB HIGH SPEED HOST CONTROLLER DRIVER to ONE OF MY USB PORTS to RUN MY CAM AND webcam

    I have Dell Optiplex gx 150 intel pentium 111. Windows xp pro service pack 3. I get a baloon saying there is no port high flow installed on my pc, now I need material or the right drivers to make it work properly. ICAN get my cam digital to work, but I get the ball, saying that I have to install the drivers of controllers host high speed to do my camera to work faster. Now the webcam does not light but I do not get a pic and it gets the same ball to get a host controller driver high speed to make it work right. So I need a piece of hardware or just the drivers on my very old but the pc work great. Please try to answer this question in advance.

    Hello

    You can update the drivers for this chipset. Contact the manufacturer of the computer and check.
    Also, check the link below:
    Support USB 2.0 in Windows XP: finally high speed
    http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

    I hope this helps.

  • Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

    How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

    I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

    Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

  • Intel USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8

    "" I am currently running windows 7 and was about to upgrade to windows 8, but the upgrade of Windows 8 Wizard says that "Intel® USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8 '. Is there any solution for this? How to install the drivers USB 3.0 for windows 8? Should I uninstall the drivers before updating?

    Help, please

    I thank in advance

    Hi badesha99.

    I'm glad to know that you've posted on the forums of Windows 8.

    I suggest to uninstall the driver and upgraded to Windows 8.

    USB 3.0 driver Windows 8 has native box, which is automatically installed after upgrade to Windows 8.

    See the mentioned link below for more information.

    http://www.Intel.com/support/chipsets/USB3/sb/CS-033870.htm

    Hope the above information helps and let us know the question in your next post.

  • Standard USB host controller

    Hello

    Failure of the USB connection to connect to a printer. Try to fix it I removed the Standard USB Host Controller Port_ #0001.Hub_ #0009 and so the device is now marked as 'unknown device' with status = error #43.

    How can I solve this problem?

    Thanks, Eitan

    "OK, what exactly should I do if"programs and features "?

    Just look in the software for your printer brand list, select it and then click on uninstall on top.

    It won't appear in programs and features if you have installed the software.

    "If the printer driver was native to the operating system and installed automatically when you first of all connected printer, it should be removed in"Printers and faxes"or devices and printers."

    Also what operating system your PC there? Vista or W7?

Maybe you are looking for