USB key in the machine of W2K3 on ESXi 4 on a Dell Optiplex 760

I'm testing the new ESXi 4 on a Dell Optiplex 760. In ESXi, I have an Ent W2k3. Machine of R2 SP2 and I want to use a USB device.

In the config of het windows machine I add the usb controller.

When I start the machine, I see a 'Remove hardware safely' there is a connected usb controller.

But if a connected a USB to the ESXi machine it does not appear in the windows machine.

Should I install additional drivers in ESXi?

I see if ESXi if he sees the usb ports?

USB keys are not supported on a virtual computer that is located on ESX/ESXi.

Incidentally, I don't think not that ESXi is supported Dell optiplex 760... Please see the matrix of compatibility on the VMware Web site.

Tags: VMware

Similar Questions

  • Problems when I want to update my complete system Mavericks using a USB key with the installation program.

    I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

    With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

    I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

    It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

    I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

    Thank you and what is Berlin

    You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

    Bootable USB Flash Drive-Diskmaker X

  • HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

    Hey everybody,

    Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

    Thank you

    Bill

    Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

  • Envy 15 t: using a USB key as the recovery media

    The instructions of assistant decision-making support, that the thumbdrive are not compatible with Windows 8 ?

    The computer is a computer of Windows 8 (actually the 8.1).  Recovery files would be (probably) 8.1 recovery of files.

    However, it seems that the recovery thumbdrive must be compatible?

    What I don't understand? ..... Izzy

    Hi @Izzy11201 ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your TouchSmart from HP ENVY 15 laptop and issues using a USB key as the recovery media.

    I think that the laptop it tell you that the Thumbdrive could not be formatted for all functions of Windows 8. It doesn't have to be 32 GB and is compatible to Windows 8 to create a recovery USB Flash disk. Here is a link to the creation of recovery disks or USB in Windows 8 flash player, if you need it.

    I hope this helps.

    Thank you.

  • I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

    I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

    After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

    Anyone know how to fix this?

    Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

    ____________________________________________________________________________________________________________

    Dell Inspiron laptop about 4-5 years.

    Running windows 7 Home Edition.

    Does not start little matter what I tried.

    If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

    I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

    Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

    Hello

    Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

    You can try the following methods and check if it helps.

    Method 1:

    You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

    • A master boot record (MBR)
    • A boot sector
    • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    http://support.Microsoft.com/kb/927392

    If the problem persists, proceed to method 2.

    Method 2:

    Please follow these steps:

    1. Tool command prompt open in the mode of the Windows recovery environment .
    2. You will see X:\Sources
    3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
    4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
    5. Restart the computer once the chkdsk command has completed.

    Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

    For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • (Redirected) doing a full install windows 7 pro sp1 64-bit on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...

    try to do a full install on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...  I get all the features and everything all the way to the last step and everything, but then I think it will be a success, it doesn't say windows startup and let me down in me leaving with a blue screen no signal on my LCD 15 '... If someone would have an idea and would be kind enough and generous to help me as a fellow geek... I mean built my first computer, lived the whole 9 yards, but still cannot understand or resolve this situation... I would greatly appreciate any help of knowledge all my colleagues people could give... .i currently do not have a phone, but is will can always happen to me by message on his or [NOTE from the Admin: Email deleted in accordance with the TOU strategy identification], thank you for your time and also gratitude.

    Best of this post in the Forum OS from Microsoft here:

    http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

    Bev.

  • Form factor of the graphics cards that work with the Dell Optiplex 760 desktop computer?

    Hello

    So I recently got this Dell OptiPlex 760 desktop form factor that I really like and I would get a video card for it.

    It's the desktop form factor. The second largest next to the mini tower. There a 240W (or 250?) food I don't want to change. I would like a GPU that works with a supply of 240 w.

    I wish it were less than 60 dollars. I do some light games (Minecraft) and want to join a substantial amount of FPS with this game. Suggestions of the card?

    I'll give you more information.

    It fits into all THE MODELS except the USFF because USFF has no slots.  You will need to remove the flange size and use the version of low profile.

    cs_setInnerHtml ('video_9366bb5b-9fda-4cca-bfea-c4ec470df1e3', ");

    Maximum power allowed is 25W on low profile units.

    It is also why they Print 25W max on the 16 X video slot.

    Radeon HD 2400 XT 25 W TDP

    Here are valid Dell Low Profile PCI - e 16 X for this chassis - video cards

    XX347 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
    YP477 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
    CP309 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out
    XX355 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out

    cs_setInnerHtml ('video_af6d7d61-a142-4402-9efd-b4abb192eca2', ");

  • I would like to add a folder of photos on a USB key for time machine backups

    I have a new time capsule, and I am attaching a USB hard drive that previously held some my time machine backups and all my photos. I would now add the photo of backups auto time folder machine on the time capsule. But in time machine preferences I don't see the folder or the USB key. Although I can see the USB in the finder as well as the time capsule window. I can copy and paste the photo time capsule file it's just I wanted to time machine for backup for me. Any help much appreciated.

    The time Capsule is what we call a 'network' of the road, so when the USB is connected to the time Capsule, which would make it a "network" drive as well.

    Unfortunately, Time Machine is unable to back up a 'network' of the time Capsule drive.

    If you want to save the data or the USB disk using Time Machine drive, you will need to connect the drive directly to your Mac and then it will be saved with your Mac... assuming that the drive has been formatted for Mac to Mac OS extended (journaled) format. Then, the player will become a "local" drive

    If you need to keep the USB connected to the time Capsule, the only way to back up data automatically on a schedule would be to use a commercial program like Carbon Copy Cloner or ChronoSync.

  • [not resolved] At boot esxi USB key, but the key is broken, how to recover?

    Hi all

    I installed a host vmware esxi 3.5 starts using a USB key.

    My problem is that the key has been broken.

    I have reinstall a new key with the same version of esxi 3.5 and assigned the same IP address to the host.

    Should what steps I follow to host my comments towards the top and run again?

    Thanks a lot for your help.

    It's not good

    Are you sure that your storage space is not the original problem?

    If you start from USB, and the key fails, ESXi will continue to function until you restart the box. ESXi RAM tracks

    If your storage space is 100%, you can try the following

    Advanced settings under configuration if I remember correct:

    EnableResignature change to 0

    Replace disallowSnapshotLun with 0 as well.

    A new analysis of the storage card at least 2 times

    Change the values back to 1 if it works

    Concerning

    If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.

  • Using the USB port on the machine host ESXi 4

    Is it possible to connect to the USB ports on the virtual machine host server? Documentation has said USB controller does not work with ESXi. Does perform a work around?

    Thank you

    Safar

    If you have a recent server that supports Intel Directed i/o / AMD IOUMMU, then you can try VMDirectPath - http://www.vm-help.com/esx40i/VMDirectPath/USB_Setup.php.

    Dave

    VMware communities user moderator

    Now available - vSphere Quick Start Guide

    You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

  • Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

    I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

    Download and install the current drivers of TP-Link.
    Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

    Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

    Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

    All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

    After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

    1. Uninstall NETWORK card and USB drivers and devices.
    2. Then uninstall the AntiVirus (in this case AVG Internet Security)
    3. Reinstall the NETWORK card and drivers
    4. Reinstall AntiVirus

    Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

    Everything works very well.

  • How can I get Lightroom to find photos on a USB key when the drive letter changes?

    This is probably a simple question, but I keep getting stuck.  I have ha

    ve my catalog and some pictures on my laptop hard drive, but most are on

    an external USB drive.  Sometoimes the car is affected

    E:, F.; or G: and when it cahnges, the catalog says the photos are missing.  How can I get

    Lightroom for photos?

    Tom Barnwell

    The quick solution is to click on the folder that contains the missing files and choose "update folder location" and then search for the file on the USB drive. The longer term and fix, you must apply is to configure Windows to always give the same drive letter USB. You can do this through the XP disk management application in the management of the computer (the control panel applet). The following screenshot is for XP and Vista and Win 7 will be something similar which is accessed via the administrative tools (see second screenshot).

  • Dell OPTIPLEX 760 error when loading the BIOS, lights 1 and 4

    Hello! Staff DELL, I have a problem with my desktop OptiPlex 760, already I have 4 Mesescon this problem and I have not found a solution, it is that my PC is locked in the burden of the BIOS and band LED diagnosis 1 and 4 with the Green switch LEDs.

    I wonder if there is no solution to the problem, because I have tried several found options and still no solution, hopefully take into account and help. Thank you and greetings from Panama.

    Video testimony: https://youtu.be/M_LqtZ6Yom4

    Hello

    The diagnosis of LED 1 and 4 Indicates defective. POWER SUPPLY.

    If the machine is under warranty, we can repair...

    Concerning

  • View the issue with a DVI-I got splitter to Dell Optiplex to adapt TV

    Good evening!

    I work in IT and my understanding of these things is superior to what a novice and a part of the reasons why this question is so frustrating. It should also be noted that I am also posting this in Dell support forums to cover all the bases.
    Here is my goal:
    To use my model of TV LED Panasonic TC-L47e5 as my primary and only monitor for a Dell Optiplex 745
    My configuration:
    Dell uses a DVI-I've got splitter (DVI & VGA) as she went out to monitoring devices. I use a DVI (male) to HDMI (female) to connect on one of my HDMI inputs on the TV.
    The problem:
    Until I'm the adapter to the DVI, I used the VGA with no issues whatsoever. However, once I plugged the DVI - HDMI setting, it was working fine until I unplugged the VGA it is connected to the connector on the back of the TV. The screen went black, even though it was on the HDMI input. I tried to update the drivers, configuration of the display settings, etc and nothing allows me to run the installation of DVI-HDMI without going through the connected VGA also. If I switch back to the VGA input on the tv I see black. But if I unplug the HDMI, I see the desktop. It's very strange, but it seems that thought the VGA adapter display takes over, which is insane, because the pc shows through a DVI - I connection separation. I scoured the internet for a solution and this little hiccup is driving me crazy. Any help you all can provide is greatly appreciated.
    Thank you!

    Hello Hunter M.

    Welcome to the Microsoft community.

    You need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

    I suggest to disconnect the HDMI cable and try to connect it buy, follow these steps.

    1. Turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
    2. Connect the video cable appropriate to your computer's output to your TV.
    3. Turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
    4. Turn on your computer.
    5. You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably have to adjust the screen resolution in Windows.
    6. If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

    See also:

    http://Windows.Microsoft.com/en-CA/Windows/connect-computer-TV#1TC=Windows-7

    I hope this helps. Feel free to write us again for any further assistance.

  • I finally found my product key, but the machine won't let me put in

    for the last two months I tried to enter my product code that I finally found on the basis of my computor & double checked repeatedly, but trying to get the code that your machine keeps telling me there is an error & to check the code again. After 2 months, it's very frustrating > I want to just register my code please advise

    Hello

    You should check with support of the system manufacturer that is responsible for ensuring that you have
    the appropriate key.

    How to identify, locate, and replace a product key
    http://support.Microsoft.com/kb/811224

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • iPad actions affect also the imac

    One of our ipads works very slowly (it uses IOS 8.0.2) and I thought I want to clear the history/cache to see if that would help to expedite. It didn't, but what I also found was by disabling the historic safari there navigation also allowed on our i

  • Apple pays fingerprinting

    New to the iPhone and the 6s.  I have "ve put in place ApplePay and everything speaks to pay using your finger/thumbprint.   I put in place a code 6 digit to access the ApplePay/Wallet (even to try to understand both), but can I pay with it using the

  • Junk e-mail filtering, continues after activate spam filtering is unchecked.

    I don't want E-mail on El Capitan to filter all mail to the junk e-mail folder. I unchecked enable mail junk filtering. I restarted Mail since unchecking filtering. I rebooted since unchecking filtering. As he did when the checked enable spam filteri

  • deletion of the batch files

    Reference: HP Photomart C7180 all-in-One Vista operating system Error 1905 How to remove my computer HP batch files?

  • When you type in the Bing toolbar, a number or the wrong letter will appear when you type

    When you try to change the name on a file, I get the same result, change keyboards, the same result. type in yahoo or other programs, that is not the case, is the problem in IE9?