USB not installed correctly, print USB media, mass storage device USB Composite device

Similar Questions

• MTB usb device drive not installed correctly

  Original title: mtb device usb driver does not not propely? What id o to fix?

  I have iphone 4S... when I connect my Iphone with my pc, iTunes connect with my iphone but pc do not connect with my phone and shows mtb reader usb device not installed correctly. How I solve this problem?

  Hi Isabelle,.

  I suggest you try the steps from the following link:

  iTunes: iTunes Store advanced troubleshooting
  http://support.Apple.com/kb/ts3297

  Hope this helps! Let us know if you have problems with Windows in the future.

• GPS (global positioning) will not work. Lack of USB mass storage device

  When I plug my GPS device into the usb port and driver disk into a dvd, where both worked, the installation wizard gives me a notice of default. Reference to the Device Manager shows 2 yellow? mark. Use of the facility of re - install and update does not solve the problem. I get a message indicating that a usb mass storage device is missing. Insertion of other devices on the usb port in question, or any other, says there is nothing wrong with any. Does anyone have an answer

  Hello

  You are able to correctly use the other USB devices on your computer, I recommend you contact the manufacturer of the GPS (global positioning satellite) for assistance.

  Hope the helps of information.

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Windows Media Player is not installed correctly. Reinstall the drive.

  I am running XP Home and WMP v11. I get the following message when I try and play some files: "Windows Media Player is not installed correctly. Reinstall the drive.

  In the past I had to go back to WMP 10 to 9 and reinstall when this happened, but when I triedthis method , this time it did not work and said that he could not uninstall.

  The songs have played fine on WMP in the past and they are the ones I've owned for years rather than months.

  I can't think that I changed something on the PC to save this change, but clearly I.

  Any ideas?

  Try to download and reinstall

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

• "Windows Media Center is not installed correctly and must be reinstalled"

  I am running Windows XP Media Center Edition and Windows Media Center gives me an error that reads "Windows Media Center is not installed correctly and must be reinstalled." When I try to install Windows Media Player from the Microsoft website I gives me an error saying I need to download "Update cumulative 2 for Windows XP Media Center Edition". Once I have download, I get a different error message indicating that I have to download '.NET Framework 1.1 and .NET Framework 1.2 SP1' before I can continue with the update for Windows XP Media Center Edition 2005. I download that and received a message that is not a valid Win32 application. I can not understand what is happening or how to fix it. I thought about uninstalling and reinstalling, but over the years, I lost track of the product key.  Does anyone know how can I fix? Thank you, in advance.

  Hello

  You can refer to the following steps:

  Step 1:

  For fixing of .net framework:

  You can check this link:

  http://support.Microsoft.com/kb/923100

  Step 2:

  You can install the update for windows media center rollup2.

  Here is the link:

  http://support.Microsoft.com/kb/900325

• Media Player not installed correctly

  Downloaded two WMA audiobooks and not able to listen to them via WMP nor able to transfer them to the iPOD.  Tells me that I need to update WMP security.  As he tried to update WMP security via the Overdrive Media Console software, I thought WMP not installed correctly.  Using XP and WMP 11.  Saved on WMP 11 from WMP 9 and reinstalled twice.  No luck.  Tried to rename the DRM folder and then trying to new security update.  No luck.

  Thank you for your quick response.

  Before receiving your response, I was able to solve the problem.  Here's what I did:

  (1) I deleted the two audiobook downloads from Overdrive Media Console software.

  (2) in the Panel, I removed WMP 11 and also removed Windows Media Format 11 Runtime (I did not remove this second program in my first two attempts to re - install WMP 11).

  (3) I have reinstalled WMP 11 on the microsoft.com Web site.

  (4) I launched the Overdrive Media Console software and selected > tools > Windows Media Player Security Upgrade.  This time, it worked as expected.

  (5) I have re-uploaded my two books.

  I'm now able to listen to the audio books on WMP 11 and transferred successfully to my iPOD.

• USB 2 not detected mass storage devices

  Windows XP SP3 USB - 2 ports do not detect mass storage devices (reported as unknown device).  Same device is detected and works OK on the USB-1 ports.  Function USB - 2 ports for printers and mass storage OK no (no brightness, without removable hard disks).  Have tried all the simple fixes found on support.microsoft.com.  No success yet.

  Hi Lostcauseracing,
   
  Follow the steps in these articles and check if it helps in fixing the issue:
   
  How to troubleshoot unknown devices listed in Device Manager in Windows XP
   
  Advanced troubleshooting tips for General USB for Windows XP problems

• Error message "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: I need the Windows Media Player for WinXP 32 bit.

  Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?

  Hi donsor,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  After the WMP update you an error of wmploc.dll on version number incorrect

  
  Reference: Windows Media Player is not properly installed and needs to be reinstalled

  Hope the helps of information.
  Please post back and we do know.

• Your Player (10)) Windows Media is not installed correctly.

  I got several emails today with links and when I click on the links and download video from topic I get this sign that appears saying that WMP10 is not installed correctly. I have not had any problems with him later than yesterday afternoon. Today, one of the links I clicked on successfully work not today. I use Windows XP Media Edition. What could have happened?

  Try to make sure that it is not Malware.

  Download (you may need to download on another machine) and run...

  http://www.Malwarebytes.org/

  .. .abolish everything it finds.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Windows Media Player is not installed correctly and must be reinstalled

  Whenever I try to get to the top of Windows media Player, I get the error message "the file wmp.dll has a version number of 11.0.221.580 where 11.0.2721.5260 was expected.  Windows Media Player is not installed correctly and must be reinstalled. »

  He then asks if I want to install the Player on the Microsoft Web site, but if I hit Yes, & make it still does not.

  I don't know what I did to stop the work. One minute, he was working & the next it wasn't.

  1. Reboot your system.
  2. Select start/run and type:
     %SystemRoot%\inf\unregmp2.exe /UpdateWMP
  3. Click Ok.
  http://support.Microsoft.com/kb/961047
  Otherwise just download and install from here
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1d224714-e238-4E45-8668-5166114010ca

• error "windows media player is not installed correctly and must be reinstalled.

  When I start windows media player, the program does not start and a dialog box appears saying "windows media player is not installed correctly and must be reinstalled. You want to install the player from the microsoft web site screen? "I downloaded the program and when tried to install it says that a newer version is already intalled in my computer. What should I do to recover the functions of the program?

  Hello

  Have you recently installed another player?

  Right-click on taskbar - Task Manager - processes and see if WMPlayer.exe is already hidden.
  If the end then on her process.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? Have you added
  recently another player or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently installed another player?

  Reset your associations:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  I hope this helps.

• Windows Media Player is not installed correctly

  whenever I click on a video, I get the message "the file wmploc.dll has a version number of 12.0.7601.18840 where 12.0.7601.17514 has been inspected.

  Windows Media Player is not installed correctly and must be reinstalled.

  You want to install the player from the Microsoft website. »

  When I click Yes. Need me on the Microsoft site, but it does not show me where to find the Windows Media Player program. I have downloaded the two files that are recommended, but none of them are for my machine. any help would be great. Thank you

  Unless you have one of the versions Windows 7 N/K/KN special then these downloads are, as you say, not for you.

  For all the normal editions of Windows 7, WMP is essential and there is no download.

  Judging from your description of the problem, I think you need "unload" and then "recharge" WMP.  It's practically the equivalent of uninstalling and then reinstalling.

  1 unload WMP - Panel, programs and features, [left] turn on or off has Windows, multimedia features, clear box Windows Media Player, Yes, OK, restart the PC.

  2 reload WMP - Panel, programs and features, [left] turn Windows features on or off, multimedia features, set the Windows Media Player box, Yes, OK, restart the PC.

  This should fix the problem.

• Receive the error message"Windows Media Player is not installed correctly and must be reinstalled. "

  * Original title: Windows Media Player

  I recently updated my Windows 7 and now my Windows Media Player will not work.  The following message appears: Windows Media Player is not installed correctly and must be reinstalled.

  I don't see where I can download the Windows Media Player for Windows 7.  Any help would be appreciated.

  If you have a ' normal/standard' Windows 7 version, then see if it deletes, reboot, reinstall, reboot the help method - http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/

  If you have the "n" or "KN" W7 version, you may need this - http://www.microsoft.com/en-us/download/details.aspx?id=16546 (check that is correct for your version 32/64 bit W7 etc link)

  If this does not help, try a SFC/scannow, and then try to use the above for your type of windows. -SFC https://support.Microsoft.com/en-us/KB/929833