USB Port Dell monitor does not work

Similar Questions

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• Dell monitor does not stay on

  * original title - my monitor does not work *.

  OK so I bought this computer about 4 years ago and it worked just fine until when I tried to turn it on this morning it does not turn on. Then I tried again and it was the case, then half an hour later he died. After that, I tried to put it on the back again but this time, when I press the button it lights but when I let go of it, it turns off the coast. I tried unpluging but it does the same thing.

  My Dell flat screen monitor

  The computer does not work

  Also I umpluged computer from the monitor and the same thing happened

  Help, please

  Hi Uther 9,.

  If the monitor does not remain during the self test, it is defective.

  * Turn off the monitor
  * Remove all cables from the computer monitor
  * Turn on the monitor
  * The floating red/green/blue/white dialog box should appear on-screen on a black background and stay on

  However, it seems that you already have, is most likely a hardware problem:

  http://support.Dell.com/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Powers of laptop on but the screen (monitor) does not work.

  I have a HP compaq laptop 6720 (vista home basic, 1 GB of ram, intelcore,...)

  Powers of laptop on and all lights are working, but monitor does not work.
  Nothing on the screen, looks like no electricity on the screen or any contact of motherboard.
  Need your help,

  Kind regards.

  Hello

  If you don't see anything on the screen when you start, and this includes see the HP Logo, it would seem that it's a hardware problem.

  Contact HP Service or a good repair shop.

  See you soon.

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• DMA2200 on PC-monitor does not work?

  Hello

  Well I have except the fact that the DMA2200 support not the VOB files, that the dvd drive is not region free and I had to reverse the mistakes of codes avi using the FourCC change codec, I'm surprised that I'm not able to see anything on a standard PC monitor.

  At first, I plugged the Componet video output (Y, Pb, Pr) of my DMA2200 directly on the vga input of the monitor (Dell 1900FP) with a cable special nine, but I saw just nothing more than a black screen. I changed the monitor for a LG Flatron L222WS monitor told me that the frequency was out of reach... Certain signals does not cross?

  But as the DMA2200 has a HDMI output that welland the Dell1900FP supports DVI - D Dual Link entry too, I. The 1900FP has a resolution of 1280 x 1024 and it can be run up to 75 Hz, 60 Hz it's native refresh rate. So, I went back to the store and bought a HDMI<->DIV - D Single Link cable.

  Only one? Yes, why not!

  DVI dual link as its name suggests has drivers more than the single link DVI for signal transmission. Single link DVI supports a maximum bandwidth of 165 MHz (1920 x 1080 at 60 Hz, 1280 x 1024 at 85 Hz) and use 12 of the 24 pins available. Dual link DVI uses all 24 pins available and supports a maximum bandwidth 2 x 165 MHz (2048 x 1536 at 60 Hz, 1920 x 1080 at 85 Hz).

  So, I plugged the HDMI<->DVI - D on the DMA2200, the Dell1900FP monitor and the monitor directly on channel 2: digital input. But... a black screen again. As I left the monitor rescanning the entrance, he tells me "Please press any key of the mouse button. It seems that the monitor sees a digital signal, but expected more... hmm... what to do?

  I tried to use NTSC (instead of our PAL) on the DMA2200 menu as the frequency changes, but it does not work. I also used all of the selections of entry on the DMA2200-menu (like composite-sd and hd). Normally, the HDMI options is grayed out and uses the default Auto option; but in composite-hd, my old TV mode (connected by SCART) turns black, but can still use the menu on the screen before the DMA and am able to change the HDMI settings, like 480 720 (if I remember correctly) and 1080 p (progressive format) and 1080i (interlaced). I hoped a solution here, but maybe it's just not my day.

  Then.

  Y at - there anyone out there that can help me to get a picture on the monitor? Whether vga or dvi - d... Please...

  Your Dell LCD and DMA2200 not being able to understand/sync between them with a direct DVI connection you could try to put a device inbetween them so that your Setup program can work. Try this device, basically, you connect the DMA2200 using RCA cables to the KWorld device and this KWorld device is then connected to your Dell LCD screen.

  See you soon.

• My USB ports and MIC do not work. I hope that this is not the motherboard. Someone knows how to fix this?

  Initially, it was a port that would not work. Before the USB ports out I did pay my phone with the USB cable. Before that my microphone stopped working. Deactivation and activation of the ports as well as uninstall then re install the USB readers and I tried a system restore. I also tried to take the battery for an hour or two and restart the PC. None of this has worked. Today, I heard some hope of my computer... I heard the sound of him recognize a dongle that is plugged. This sound is produced after starting my PC. I have not heard in a while and still haven't when I unplug and plug back in to the dongles. My computer (a laptop) like also to restart auto sometimes when I close the lid and open it, the screen does not light and it will be off and try to restart itself but the screen never lights up and he'll stop and try several times to start. In this case I have to hold the power button down to turn off completely and take the battery out and put it back in, then turn it on. I feel that it's a hardware problem but I'm not that great with computers and I don't want to give up yet on this computer. It cost me a pretty penny and I am a broke student.

  If anyone had the same types of problems and has a solution I'm willing to try anything.
  Thanks in advance
  -Mike

  Hi Mike,.

  You can consult the following wire link and check if it helps.

  Tips for solving problems of USB devices

  It seems that you have to re - enable ports in the BIOS (Basic input/output system) settings.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Be sure to observe the manufacturer's instructions or contact the manufacturer for the same thing.

  You can consult the following thread link and check.

  USB ports, CD/DVD player, and Mike just does not work

• GADMEI USB TV Tuner card does not work on the new Windows 7 computer

  Original title: usb tv card is not supported in windows 7 x 64

  Hello

  I have new office... everything works fine, the problem is with my tv usb card.

  I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

  I have no other problems in my pc or tv... cards all drivers are up to date.

  Here is my desktop specs:

  model of motherboard is asus b85m-k

  

  

  Hello Faysal,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
  2. Did you check connecting them via a different USB port?

  There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

  Hardware devices do not work or are not detected in Windows

  http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  Method 2:

  If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

  You can also read the article below to help update the device driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.