USB port do not work or reading when it is connected

USB Mass Storage Device Properties a message arrives in the details, Device Instance ID of section «»

Read the error message

USB\VID_18A5 & PID_1E23\5 & 13069516 & 0 & 6

Himanshu salvation,

· How long have you been faced with this problem?

· Did you make any changes before the show?

Refer to the following Microsoft Fix It solution and click run now , and follow the steps to solve the problem:

Hardware devices do not work or are not detected in Windows:

Hope this information helps.

Tags: Windows

Similar Questions

  • NB200-12N - USB port does not work


    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you


    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • Re: USB Ports do not work on my Satellite L830-145

    I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
    Maybe here someone will have an idea

    When I start the computer power light before windows starts and goes dead when windows starts loading
    On USB3 I can recharge the phone, but it won t recognize anything in windows
    Any help much appreciated.

    According to specification for laptop, your laptop comes with Win8 64bits.
    Using the original version of Windows preinstalled?

    All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.

  • Satellite P200 - 17 c: USB ports do not work after BIOS update


    Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

    Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

    I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

    Any info or advice would be great.

    See you soon.

    Glad you ve found a solution and thank you for sharing this with us

  • X 51 - R2. Before USB ports do not work

    I just got my new Alienware X 51 R2 recently. I begin to test on my new computer. Then I found at the front, two USB ports do not work! My USB device is functional because it works when I connect it to the rear USB ports. I don't know what problem is it? I tried to update and install the driver too much on It's a new pc and therefore disadvantage if the front USB ports do not work. Help, please

    Just for someone else who has this problem. It's actually all because the cable that connects the USB card to the front of the motherbard is connected with a black cable. You will probably find that opening upwards, you will find that the thick black cable is not connected.

    Once reconnected, you will have your USB market back again. You will also find that your AlienFX works. I just had this problem and after the challenging my brain trying different drivers, reinstalling the operating system, make drains of power without meaning, try all USB, I, I thought I would check the actual cable and voila. Hope it helps others in the future.

  • My USB ports do not work.

    Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?


    1 reboot to be sure nothing blocks the ports.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN


    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista


    Then lets refresh the USB stack

    Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

    Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
    plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
    for all instances

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical


    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit

    Hardware devices not detected or not working - Mr. Fixit

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you


    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • USB ports do not work after waking up Satellite A200 from sleep mode

    After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

    Hi mate,

    already tried this:

    Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

    Maybe it works. Another solution would probably be this Microsoft KB document:


  • Satellite L40 - 18W - USB ports does not work after format HARD drive

    I formatted my laptop "L40 - 18w" after that all usb ports do not work.

    Could you please help me on this issue

    Thank you

    Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
    Please see the download page for Toshiba under
    There you can find all the drivers for your model of laptop including driver chipset.

  • Satellite A110-260 - USB ports do not work

    I have a Satilite A110-260 of my brother.
    The problem is that the USB Ports do not work :-(

    They go into the hardware Manager, but I can't install it.
    I have download the hardware installation of the Toshiba homepage but... :-(

    Can you help me?

    Sincerely of John

    PS Sorry for my English ^^

    Can you please tell us what OS are you trying to install?
    SP1 or SP2?

    Please after the installation of the OS, the first thing you need is install driver Chipset.
    Did you install the right one?

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...


    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

  • El Capitan USB port does not worked well under Yosemite.

    Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
    Has worked perfectly under Yosemite unfortunately too long to go back.

    The USB port does not work with other USB devices?

    I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary. view/8 / #h1

  • xw6400 workstation: USB ports do not work

    Non of my USB ports work. I tired everthing but always without success. In the end, I removed microsoft 8 and installed a new, but still my USB ports do not work. Motherboard is HP E93839

    Anyone know how to repair or fix this problem please?


    Thank you, Mohammed, but I already did everything on the Microsoft Web site. The problem is the motherboard no software issue. I plugged in the motherboard main power power off and waited 5 min the reconnected and it started working.

  • USB ports do not work on my pc windows 7

    I had installed windows 7 os newly but the usb ports do not work.

    and ports work in windows 8.

    while trying to install the usb driver its showing already installed on your pc.

    I don't understand what the problem is.

    If you are From India call 180030005366 and ask to Lenovo Tech person to take the remote control system to check, seems like a patch required on their side

Maybe you are looking for

  • sanDisk SDXC 64 GB 45 M/s doesn't recognize Satelite Z830

    Hi, who can help?sanDisk SDXC 64 GB 45 M/s will not recognize by satellite Z830Win 7 homeI read in the specs: the drive is able to do this.Thank youDellmann

  • Freezing of Skype

    Hey So, updated everything on my computer yesterday, before the upgrade to windows 8.1. As soon as I got it, Skype would not work either. Thus, spent a few hours browsing the forums and found that I needed to get back to this "". So I did, a

  • How to print several different pictures of my photo on a piece of paper photo gallery?

    There are times when I want to print different photos of my 81/2 "x 11" photo gallery photo paper and have not been able to find a way to keep them there while searhing for another photo, can you help me? Thank you!

  • WLC config doubt

    Dear all, I write the configuration wlc on paper, I have yet the wlc 5508 here. This is the first time that I have set up a wlc. I choose connect the wlc to two different cisco 3750, which will be the nucleus of a network of small size (30 users) To

  • java update online banking

    HelloI am an Oracle user and would need to access the Citi Bank online as well. When I tried to access Citibank online application requires a JavaUpdate. Please help me with what version I have to install.ConcerningRajesh