USB ports are damaged on the Satellite C660-1R3

Similar Questions

• Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

  Hello

  I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

  Can someone help me please?

  Thank you

  Hello

  To get to play, pause and other buttons works, you need to install the VAP (value added package).

  The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

  I hope this helps a little

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• I need to adjust my bios so that my usb ports are active immediately.

  I can't go in safe mode because my keyboard is a keyboard wired usb and the usb ports are not on the time that I have to press F8 (or any function key). I understand there is a setting that I could make to the registry. Can someone give me the specs?

  I'm using Windows 7 Ultimate 64 bit with a HP Pavilion Elite M9600t

  I bought the Logitech K800. It works very well (touch wood). The function keys, I get into safe mode, etc.

  DETECTIVE CONAN. Thank you!!!

• Cost of the repair on the Satellite C660-1ñ3 USB ports?

  Two ports USB 2.0 on my Toshiba Satellite C660-1ñ3 are broken,
  My question is, how much it would cost me to fix them?

  where can I buy some usb, connectors and solder on myself?

  Kind regards

  Ralf

  I think that no one here can tell you how much it costs. Contact the closest service provider for Toshiba and talk with them. They can tell you how much it will cost.

  Theoretically, you can do this alone, but if you n t have experience with this kind of things I think that this should be done by a technician.

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• USB ports do not work on satellite 40 X after reinstalling the operating system

  Hi all

  I formatted my laptop X of Equium 40 recently and since then the USB ports are not recognition of everything that is plugged into the port.
  Can anyone provide me with the drivers. I use Windows XP Professional.

  Thanks in advance
  SKP

  Hello

  It seems that you have installed the CD Microsoft Windows operating system and not the Toshiba Recovery CD
  In this case, the installation of Toshiba drivers available on the driver page is necessary.
  Have you installed all the drivers in the correct order?

  For most installation instructions are placed on the driver page, and you must always follow the order of installation recommended in this document.

  Have you installed the chipset utility? This Intel application is one of the most important applications and must be installed at the beginning.

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• WiFi radio adapter off, the USB ports does not and the Bluetooth adapter is no longer visible... Please help!

  I had my laptop Dell Vostro repaired under insurance in January 2013 after a spill of liquid.  HAAC Ltd. has replaced most of the laptop - but the return, the SD card did not work.  This seems to be due to the engineer he connects not properly and the company recommended it and returned it to me again.  A couple of months, I found my USB was temperamental - so is my built in Bluetooth adapter.   Last month - the wifi does not work for most of the time either so I have to connect to my router by wire.

  This could be a problem in windows 7 - all my problems seem to be related to network adapters.  If it's a hardware problem - does anyone know if it could be another loose connection?  HAAC Ltd. only give a 3 month warranty on parts that seems just a little.  But if this anomaly is due to the production of poor quality - that is not properly connect the laptop then I'll go back their again if they are responsible.

  By the way – there's a switch wifi on the front of the laptop - but is not currently be recognized.

  If anyone has settings that I could check that can help - especially if some inhibit the use of wifi.

  Thank you very much

  Hello

  Your wifi switch not recognized is probably a hardware problem. The rest could be a hardware or software problem.

  Method 1:

  Lets start by doing a reset to coercive. Follow these steps:

  1. Unplug the notebook (remove power cord), then remove the battery.
  2. Disconnect all USB devices and the connections between the USB ports.
  3. Let the laptop only for several minutes.
  4. Then plug the power cord without connecting the USB devices. Then replace the battery.
  5. Plug each device in turn, allowing them to load the drivers of devices one at a time (plug in the appliance and wait its loading all its drivers before installing the next USB).

  The computer recognizes the USB ports? All of them or none of them?

  Method 2:

  Open Control Panel, Manager of design. Click the view tab, and then click Show all devices. From there, you can remove all instances of USB devices and restart the computer to see if the problem resolves. Repeat this procedure with the wireless adapter (uninstall and reinstall, ensuring that there is only one instance of the wireless adapter).

  Method 3:

  Create a new user account by following the instructions in this article:   http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem?  If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.

  Try these methods and post your results here. I'll be here waiting for the results!

  Kind regards

  BearPup

• Upgrade of RAM up to 8 GB on the Satellite C660-180

  Hey guys,.

  Thanks a lot for taking a peek at my post.
  I have the Satellite C660-108. I think the upgrade to 3 GB up to 8 GB ram.
  I'll be very grateful if someone could answer my questions before making a purchase.

  It is a model of Ram. I think of buying.

  Kingston HyperX Plug and Play DDR3 1600 MHz CL9 8GB SODIMM Memory Module

  I wonder if it would correspond to my laptop?

  Also, I found this on C660-108

  Type: Intel® Graphics Media Accelerator HD
  amount of memory: 1 273 MB shared memory with 3 GB of installed system memory and up to 1 696 MB with 4 GB of system memory, (with system of 64-bit pre-installed operating)
  memory type: shared.

  If I update up to 8 GB ram it would mean my graphics system memory will be up 3 392 MB as well?

  Thank you very much.

  Kit

  According to the technical page of Toshiba laptop, 8 GB of RAM (2 x 4 GB) are certainly possible.
  Kingston is a good manufacturer of RAM and provide good quality modules.

  The RAM modules should support the following sepcs:
  DDR3 1066 MHz (PC3-8500)

  Processor PENTIUM P6100 (2.00 GHZ) supports a 1,066 MHZ FSB and therefore the PC3-8500 must operate at full speed 1066 MHz

  > f I upgrade ram to 8 GB it would mean my graphics system memory will be up 3 392 MB as well?
  More RAM means more can be shared with the GPU, but this is controlled by the graphics driver automatically.

• Modeling 3D (Sketch Up) programs keep crashing on the Satellite C660 - 28 d

  Hi guys,.

  Obtained the Satellite C660 - 28 d to Christmas as my old laptop was dying on its feet. So far I've had no problems with it, except for when you use a selection of programs, namely Sketch Up and the rhinoceros are two 3D modeling programs. Strangely enough, AutoCAD Revit works great, I have imagined would have been more demanding on the system.

  When Rhino opening he allows me to choose my model before crashing and displaying a message saying "Rhino 4.0 has encountered a problem and needs to close" and with Sketch Up I get again select a model but then a message saying "Google SketchUp has produced a bug splat and needs to close" followed by a similar error report form that never works when I try and send the error. This is happening on SketchUp 8, after having uninstalled and reinstalled SketchUp 8 and then uninstall and install SketchUp 7, all with the same result.

  It has been suggested to me that there is an error with the graphics card and I have to download a driver, but the only driver on the Toshiba site that would make sense to me is the display driver, I have installed and makes no difference.

  Please help me, I need the use of these types of programs for the University.

  Hello

  It is possible to have these problems because of display driver.
  You should maybe contact the software manufacturer and ask for help. Toshiba doesn't third party software support. Software maker has better experience with own product. I presume that what they have tested on different platforms and need to know what can be the problem.

• USB ports do not work on Satellite M-series

  None of the USB ports work on my laptop. OS is Win XP SP2. When the system returns settlement she gives a pop-up error message "usb 1 post does not work. Please remove the USB plugged in this USB port.
  I tried updating BIOS, chipset, uninstall reinstall windows, alos tried only XP without SP or updates, still the same problem. Nothing happens when I plug the USB device into a USB port.
  Can someone has any advice?

  Hello

  This problem appears only after arriving in eve?
  If so, I would recommend disabling the safe option of power manager devices for USB controllers.

  I have also studied a little bit on the Microsoft page because in my experience, most USB problems are related to the Windows operating system.

  I found this document MS proposal excellent solution:
  http://support.Microsoft.com/kb/329255/en-us

  Good luck

  PS: What device you tried to connect to the USB port? Have you tried using a different USB port?

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.