USB ports, CD/DVD player, and Mike just does not work

So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

Tags: Windows

Similar Questions

  • Re: Satellite - DVD player and the micro does not work

    Can someone help me please?

    My DVD player works but it doesn't show anything on the screen, I think that it s a problem with the registry keys and another problem is that my plug in microphone works, but when I insert a micro my computer freezes for 10 minutes and then stops.

    Thank you.


    First of all, it would be interesting what model of laptop you have now.
    This would be really useful, you know

    > My DVD player works but it doesn't show anything on the screen, I think that it s a problem with the registry keys
    I'm scared of m I m not quite sure what you mean exactly by it doesn t show anything on the screen.
    You see the CD/DVD drive in Device Manager and my computer?

    If the CD/DVD drive is not visible in my computer then go into Device Manager, remove the ODD (CD/DVD drive) of the list of devices.
    Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Finally, restart the laptop.

    With regard to the question of jack mic.

    I don't know why your laptop crashes after plugging the microphone, but maybe you should check if it is not a software problem.
    You can check if the same question would appear after the new installation of the OS.
    I know it's a radical step, but it could be useful.

  • After upgrading Windows Vista to Windows 7, DVD player and the sound does not work on Hp Pavilion 6807us laptop.

    Original title: multimedia player Super Multi 8 X DVD±R/RW with Support Double layer on my computer is hp Pavilion 6807us laptop detects not.

    I have a multimedia Super Multi 8 X DVD±R/RW drive with Double-Layer drive that is not detected on my computer hp Pavilion 6807us laptop. The same day as my sound stopped working. My OS is windows 7 but was Vista when the problem started. Can someone help me? Buy the way, my sound and my cd/dvd device does not appear in Device Manager. My Dvd Player is displayed in order to start installation. Help please.

    HP doesn't produce the specific drivers for this model, only drivers Vista, win7, and as such it may not work properly.

    If the problem occurred previously under Vista must have been resolved then, as the upgrade, an o/s is unlikely treat a pre-existing

  • driver DVD update and there but does not work

    My HP laptop DVD player does not work properly. When I try to update the driver, it does state that it is updated and currently, but it will not allow the DVD player function. When I check the peripheral material, it gives an error CODE 19.  It says that the drivers do not work properly.  I tried to allow the installation of HP Assistant driver and everything imaginable but nothing helps.

    It ends up being a higher filter problem in the registry to have two software for DVD.  It's corrected now.

  • USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

    In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?


    There could be a hardware problem that just happened to come while he was on the system.

    Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
    If there is another USB settings and check with system manufacturers.

    Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
    keep the data.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD

    How to perform a repair for Vista Installation


    Several options below.

    You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
    totally your data off the drive of backup, and you need to reinstall your programs. If you do not
    Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
    Then you can make a complete new installation - just select the format options that erases the entire disc (this
    Clears all data as well).

    How to perform a repair for Vista Installation (this keeps your data if the backup off the)
    Player is safe)

    How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on

    This tells you how to access the System Recovery Options and/or Vista disk

    How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on

    How to do a Custom Installation of Vista - this is a clean install should, however, save your data

    Upgrade to another edition of Windows Vista - this should keep the programs and data

    Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)

    On-site upgrade

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • DVD player and dual boot do not work on the computer.

    I have two computers - an a dual boot Win 7/Vista; the other Win 7. In these days, nor (2) DVD player work in the dual boot Win 7, any more than the DVD in my other Win 7. All three say:

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    However, both work on Vista. What has Microsoft done now?

    Separated from -.

    Hi DonnieS,

    As you mentioned in your post, it is usually caused due to corruption in file registry of pilots. I would suggest trying the following methods and check if it works for you.

    Method 1:

    The known last good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The known last good Configuration feature restores all information and the driver registry settings that were in effect the last time the computer started successfully.

    Refer to the following article in Microsoft Help to boot last known good configuration:

    Method 2:

    Try to reinstall the drivers from CD/DVD and check if it helps. This is to check if the problem is caused due to the corruption of driver's record or not.

    To uninstall and reinstall the device drivers, see the following Microsoft TechNet article.

    Please reply with the status of the issue so that we can better help you.

  • Just updated to IOS 10 and replace text does not work

    Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

    I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

  • Satego P100-10F: Windows XP Lan, usb slots and the sound does not work


    I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

    I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

    I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

    Ty and Greetz

    See European driver of Toshiba.
    Here, you can try to install several drivers of different portable Satellite P100.
    Try all series.
    Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
    Therefore, it should be possible to use the unique drivers of these series.
    Check all.

  • I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

    I just 6 s phone and when I try to buy stuff, it says "enter a password for [email protected]***". It's not my apple ID and my password does not work

    The phone that you have just bought is not new. It is locked to its previous owner.

  • I'm using a MAC with the current software. I am trying to download Adobe Flash Player. My password does not work. I ' v reset my password and restarted my computer. I need help with my password at the bottom of load.

    I'm on a MAC and my password does not work, I reset my password and I can not even download Adobe Flash Player.

    This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

    If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

    If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

    If you are still puzzled, you may need to reset the password on your Mac:

  • CD drive does not open and the light does not work

    original title: single CD player problem

    The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

    My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

    When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

    I also tried troubleshooting and no solution.

    WTFFF ideas? I really hope that its not the motherboard

    There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

    "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

    Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

    I tried to connect on a couple different SATA ports on the motherboard.

  • Satellite L350 - key FN and F9 touchpad does not work


    I have a toshiba Satellite L350 with Vista 32 bit and my problem does NOT work FN keys.
    I installed already Synoptics Touch Pad V6.3 from Toshiba Web site, but it did not help.

    I searched for other software mentioned on this forum, but I could not find.

    The biggest problem is that my touchpad is locked, and fact without work FN + F9

    Use me keyboard just - what is difficult and annoying :(
    I'd be really greatefull if anyone can help me :(


    I agree with Akuma
    You need the PPV for the FN keys work.

    PS; If you want to use the Toshiba OS preinstalled, so everything should work properly!

  • Sony DVD RW DW - Q85A Driver does not work

    We have a relatively old Sony Vaio (VGN-FS485B) with Windows XP operating system.  The topic CD/DVD driver (RW-DW-Q85A) does not work and the State of the specified device is the following: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Unable to overcome difficulties following procedure of Troubleshooting Device Manager.

    Grateful for any advice.

    This article can help...


  • MS Office 2010 Pro and my printer does not work,

    I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
    All the apps work except in order to print it.
    I am running WinXPPro w/sp3.

    Jim K.


    1. What is the exact error message?
    2. don't you make changes on the computer before the show?
    3. What is the brand and model of the printer?
    4. this problem occurs with all files that contain the Active X objects or specific file?

    Method 1:
    Run the fix it and check.

    Method 2:
    Try the steps in the link and check.
    Printer in Windows problems

    Method 3:

    This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: : how to back up and restore the registry in Windows

    a. Click Start and run, type regedit.exe, and then click OK.

    b. expand the following registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

    (c) in the right pane, right-click 1200 and then click on edit.

    d. in the value data box, type 0. Then, click OK.

    e. close the registry editor.

  • I can't log in to my account to Mozilla, and Password Reset does not work.

    I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
    and password reset does not work. Here is one of my themes:
    my email: [email protected]

    Support for the site Add - ons are here:

Maybe you are looking for

  • HP Pavilion Notebook N5P52UA #: need to upgrade to a better graphics card Intel HD 5500 graphics card

    I just downloaded and installed the video editing software, Blackmagic Design "DaVinci Resolve". The first launch this program popped up a warning that my graphics card is unable to be aware of the program. Device Manager showd Intel Core i3-5020U at

  • hpdeskjet3522: printer

    Purchased a HP Deskjet 3522 printer (all-in-one). Load the disc for printer wireless, had a break-in and my laptop was stolen. I don't have the disc to load on my new laptop. How / where can I find a download to connect the printer to my new laptop?

  • about-> network displays blank page

    Hello After upgrading my Blackberry Z10 Dev Alpha B FW at  on-> network displays blank page. So I couldn't find MAC address, what could I do?

  • How to download picture from camera to Photo Gallery

    original title: uploading photos Could someone tell me how to download my pictures from my dig. camera to Windows Photo Gallery?Thank youLeeflea

  • Keyboard and mouse do not work when connecting

    I have windows 7 and ubuntu 9.10 "multiboot". He had been working well, until I rebooted. I had just done a WinPE boot drive, and I wanted to test it. Now the keyboard and mouse do not work on screen or login in safe mode. Help, please