USB ports do not work after waking up Satellite A200 from sleep mode
After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!
already tried this:
Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.
Maybe it works. Another solution would probably be this Microsoft KB document:
I bought a 2nd hand A200.
I formatted directly and installed Vista Home premium.
After all pilot facilities, I detect that the USB ports on the right side do not work :(
There is no driver chipset for Windows Vista. But only for XP.
I have installed to test the chipsaet XP drivers in Vista, but the same problem is still there.
Please, everyone the same problem?
What model A200 do you have exactly?
If you need a chipset for the Intel chipset driver you can download also from Intel page directly. This t shouldn't be a problem
On the other hand, it would be interesting to know if the USB ports on the right do not work with any external USB devices.
Have you tried to connect a USB mouse to all these ports?
Sometimes a simple delicate solves these annoying problems.
-Disconnect all USB devices
-go to the Device Manager
-remove all USB host controllers and hubs USB root to the list of devices
-restart the laptop; wait until all devices would be installed
-reconnect the USB device
In my case, this procedure has helped several times.
My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please
Original title: hardware device
Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .
Let me know if one of them might be your problem.
I formatted my laptop "L40 - 18w" after that all usb ports do not work.
Could you please help me on this issue
Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
There you can find all the drivers for your model of laptop including driver chipset.
Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.
Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)
I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.
Any info or advice would be great.
See you soon.
Glad you ve found a solution and thank you for sharing this with us
I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.
Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.
Plug the mouse on or off doesn't change anything. Only restart helps.
It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?
I have a strange problem today. The 2 USB inputs on the right side of the laptop (idk who is 2.0 or 3.0) does not work with the reason I can not perceive. These 2 guys are on different days, but in the same way. A month ago, I plugged the mouse USB wireless to one of them, then entered mode 'sleep'. When I came back, I discovered the work of mouse aint.
Then I realized the port I plugged the key USB has no electiricity inside no more. I found it very strange and continuous without using the port of broken, until yesterday. Yesterday, I made the same mistake (a la mode "sleep" in a USB port plugged into the other port - work-) and I have re-opened, the 2nd port is broken in the same way, too. I've mastered Manager devices, regedit, but it has no use. This lead me to think his could be a hardware problem, but how can be possible? Is this a coincidence?
Now, I have to use my 3rd and last port on the right side of the laptop with a USB duplicator.
You have any ideas? Can it be a software problem?
Understand this correctly? The USB ports mentioned don t work even after restarting a new laptop?
In this case, it could be really a hardware problem
But before talking about hardware problems, I recommend to recover the laptop using Toshiba recovery.
Defining the notebook back to factory settings will help you identify the problem: If the USB ports wouldn't work, this s hardware problem.
I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.
When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.
It will be useful, if someone has a solution for this error.
Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?
If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.
I hope that it helps :)
Searched the forum and noted that it happened a few times, but doesn't really say what happened.
I updated the bios with bios of this website 2000a.rom. The USB ports have the power because they can charge a bike light usb, but not visible under windows or under several versions of Linux.
The only other thing that has been said is a new motherboard that is not an option with this laptop as his old enough is, I like to keep because it's a good small portable
Thank you for your help.
You have the original recovery disk of Windows XP Home for this old Satellite phone?
running Win7 64 bitProcessor Intel core 2duox 2 corsair 2 GB RAMATi Raedon 4800 series gfxall the drivers are up to date.no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.
Oops, ok, so I disappeared for a bit there.Yes, I tried that as well.OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard
HelloThere was an automatic update that occurred a few nights ago on my computer that I never knew until after that I turned on my computer back the next day. The computer starts up, then stopped and restarted about twice more - a total of three reboots in all.It is really annoying, because my Bluetooth has also stopped working a few days before. So I'm completely paralyzed - I've been using USB keyboard and mouse since the Bluetooth went bankrupt. I can not connect.The computer starts as usual. The 'numlock' keyboard lights, like the optical light under the mouse; This happens just before the Windows loading screen. However once windows loading screen comes and the "pearls" downstairs begin circulating, the mouse and the keyboard go quiet. I am sure that there is no hardware problems, and the keyboard and mouse work on my Mac very well.I tried system restore and PC options refresh on the Startup Options page, but unfortunately, my hard drive is unlocked, and system restore won't work; It says that I need to specify which Windows Installation to restore. I also tried my options with the Windows CD.Do a complete restore of the system is not really something I want or feel that I can do. Being the sidenote, I have school work on this machine in question, and it was already over. Otherwise, I would have not had any problems.Anyone had this problem before?
Hi, I just have this problem, but I have noticed that the driver has been disabled, when I activated, it works fine now.
My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.
I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.
The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.
Please can someone help.
> This problem start after a storm in my area some time ago.
Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems
I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.
But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you
I have a Satilite A110-260 of my brother.
The problem is that the USB Ports do not work :-(
They go into the hardware Manager, but I can't install it.
I have download the hardware installation of the Toshiba homepage but... :-(
Can you help me?
Sincerely of John
PS Sorry for my English ^^
Can you please tell us what OS are you trying to install?
SP1 or SP2?
Please after the installation of the OS, the first thing you need is install driver Chipset.
Did you install the right one?
I just got my new Alienware X 51 R2 recently. I begin to test on my new computer. Then I found at the front, two USB ports do not work! My USB device is functional because it works when I connect it to the rear USB ports. I don't know what problem is it? I tried to update and install the driver too much on Dell.com. It's a new pc and therefore disadvantage if the front USB ports do not work. Help, please
Just for someone else who has this problem. It's actually all because the cable that connects the USB card to the front of the motherbard is connected with a black cable. You will probably find that opening upwards, you will find that the thick black cable is not connected.
Once reconnected, you will have your USB market back again. You will also find that your AlienFX works. I just had this problem and after the challenging my brain trying different drivers, reinstalling the operating system, make drains of power without meaning, try all USB, I, I thought I would check the actual cable and voila. Hope it helps others in the future.
My USB ports no longer work after my computer crashed and I did a manual restart. As I go into the Device Manager the USB controller tab is absent even after I show hidden. I got no message error, nor do I see the yellow triangles. I have a gateway lx6200, 32-bit. Windows 7. system type x 86. Thank you
Thanks for the fast display update on the State of the question.
Please click the link provided below which has Windows 7 drivers available for the Chipset.
Please enter the model number, and then select the operating system as Windows 7 32 bit in the menu drop-down.
Maybe you are looking for
Hello. Dose - what someone know how to restore a factory in the Satelite L850-1LK.I tried F12 key 0. No results.
I need the driver for windows 7 or windows 8.1 for my Hp Pavilion dv6 I7 2360qm, help me please I am Cuba
I recently bought a new laptop - C850 Satellite with Windows 8. It works fine on my WiFi at home but I'm working away at the moment and he will not find the network, or any network. My phone is connected to the network, so I know that it works correc
Hello I'm working on an old client computer that is running Windows XP SP2. The computer is unable to connect because of a sort of DNS issue, so it appears. See, very strange: C:\Documents and c > nslookup digg.com Server: quarter - pri.sys.gtei .net
This topic has been beaten to death, but I have a bit of a twist on the issue / problem. I volunteer for a small school non-profit private who uses the systems for a year and then a need to recreate the image. Under XP, it wasn't a problem because th