USB ports do not work under Vista on Satellite A200

Similar Questions

• USB ports do not work after waking up Satellite A200 from sleep mode

  After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

  Hi mate,

  already tried this:

  Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

  Maybe it works. Another solution would probably be this Microsoft KB document:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

  Greetings

• Sound does not work under Vista on Satellite A200

  Hello

  I have a problem with the sound, in fact he disappeared suddenly and I don't know why. It was working properly and I put the headphones in my notebook, and now it stopped.

  The only sound I hear is helmet, but this is not clear, there is some distortion.
  I reinstalled the drivers for sound card and now I don't know what more I can do.

  Maybe someone could help me?

  I would be really grateful :)

  Best regards

  OLA

  PS Sorry for my English.

  Hello

  sounds are really weird. Maybe the jack-in is damaged or something. You should know that there is a small switch in the jack-in, which controls whenever you plug in headphones, the machine disables the installed speakers, then you can only hear the sound from your headphones.

  In your case I plug headphones into the machine and try to move the CAP a LITTLE MORE, maybe the switch works then again.

  Otherwise I suggest to send your machine to the nearest available in your country servicepartner and let them perform a few material balance or repair.
  Here´s a link to a index of ASP where you can find the closest: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  Welcome them

• Re: USB Ports do not work on the old Satellite P10 (PSP10E)

  Searched the forum and noted that it happened a few times, but doesn't really say what happened.

  I updated the bios with bios of this website 2000a.rom. The USB ports have the power because they can charge a bike light usb, but not visible under windows or under several versions of Linux.

  The only other thing that has been said is a new motherboard that is not an option with this laptop as his old enough is, I like to keep because it's a good small portable

  Thank you for your help.

  You have the original recovery disk of Windows XP Home for this old Satellite phone?

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• My USB ports do not work.

  Hello
  Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?

  Hello

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite P200 - 17 c: USB ports do not work after BIOS update

  Hello

  Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

  Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

  I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

  Any info or advice would be great.

  See you soon.

  Glad you ve found a solution and thank you for sharing this with us

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Re: USB Ports do not work on my Satellite L830-145

  Hello
  I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
  Maybe here someone will have an idea

  When I start the computer power light before windows starts and goes dead when windows starts loading
  On USB3 I can recharge the phone, but it won t recognize anything in windows
  Any help much appreciated.

  According to specification for laptop, your laptop comes with Win8 64bits.
  Using the original version of Windows preinstalled?

  All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.

• Satellite A110-260 - USB ports do not work

  Hey!
  I have a Satilite A110-260 of my brother.
  The problem is that the USB Ports do not work :-(

  They go into the hardware Manager, but I can't install it.
  I have download the hardware installation of the Toshiba homepage but... :-(

  Can you help me?

  Sincerely of John

  PS Sorry for my English ^^

  Can you please tell us what OS are you trying to install?
  SP1 or SP2?

  Please after the installation of the OS, the first thing you need is install driver Chipset.
  Did you install the right one?

• Satellite A10 s203: USB ports does not work

  Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

  Hello

  If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

  Good bye