USB ports not recognized on the computer.

Similar Questions

• USB stick not recognized by the computer. Have tried all the options I can think about.

  Very well.  I have a S-Mini Patriot 32 GB flash drive that does not recognize my HP Slimline 400-434 Windows 8.1. In my view, he acknowledged once and has refused to do since. My laptop (Windows 7 Toshiba) recognizes very well.

  All other devices USB function perfectly on this computer. USB hub mouse, keyboard, USB, cable Apple iPhone.

  1. I tried to unplug all other USB devices before trying this one. IN CASE OF FAILURE

  2. I went to device management and the USB does not appear in the list. IN CASE OF FAILURE

  3. I uninstalled the USB root hubs and restarted the computer. IN CASE OF FAILURE

  4. I tried to plug in the USB ports on the back that plug directly into the motherboard. IN CASE OF FAILURE

  5. I have updated the drivers, and have been unable to find a update of the BIOS as the link on the HP download site and told that it is incompatible to my computer. IN CASE OF FAILURE

  .. then what the hell gorram bloody I do now?

  Good and the most ridiculous way, I never solved a technical problem...

  Failed to insert the USB flash in the port. She has to insert slowly, so that the contacts are aligned.

  I found it trying to connect to it in my USB hub and noting that the witness red light was going on and outside that I inserted the USB key, flicker on as I inserted it there and then off once it is all the way in.

  Weird. But good. It works now.

• connect to the computer using a usb cable, not recognized by the computer

  Hello

  the ZTE open, I already checked the "usb mode" in the settings, but the computer can not see my storage when it is connected by a usb cable, so I can't transfer any file on.

  Draft of microSD on the device is quite embarrassing, an idea?

  Ah, never mind, just, it fixed itself. None.

• Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

  Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

  I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

  Hello

  
  1. have you checked if the external drive is detected on another computer?
  2. What is the exact error message you get when the task fails?
   
  To work with the issue, check out the following link.
  
  My drive does not appear in Windows Explorer
  
  http://support.Microsoft.com/kb/330140
  
  Check if it helps.

• USB device not recognized by my computer at all the

  OK, so my problem is my 16GB Verbatim USB is not recognized by my computer at all. I tried to go to devices in the control panel and it is, but the box is grayed out. The problem that my USB has worked constantly (it would be a huge problem because of all my school work that's out there) and if so, is it possible possible to retrieve the information off it? What is an easy problem to solve.

  Help please?

  Thank you

  Hi Teagan,

  1. do you get an error message/code?

  2 do you have similar problems with other USB devices?

  3. the problem occurs on a different computer?

  This problem may occur because of the bad or corrupt drivers or the appliance itself is damaged.

  Here are some ways you can follow to resolve the problem:

   

  Method 1:

  Connect the device to a different USB port on your computer in order to eliminate all the problems that are associated with a specific USB port.

  Method 2:

  Check out the link and follow the steps in the article:

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Install, view, and manage your devices and printers

  http://Windows.Microsoft.com/en-us/Windows7/install-view-and-manage-your-devices-and-printers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  If the problem is related to the craft and to retrieve the information about it, you can also contact the verbatim support for assistance:

  Reference:

  http://www.verbatim.com/support/

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Lumia 710 Nokia is not recognized by the computer

  Lumia 710 Nokia is not recognized by the computer

  Hi sagarxx,

  Have you installed the Zune software?  Take a look on this link down:

  http://www.Nokia.com/us-en/support/product/lumia710/downloads/

  Keep in mind the following:

  Software Zune will not work on versions of Windows prior to Windows XP SP3. Download Windows XP SP3.

  I hope this helps!

• USB ports not recognized anymore

  I have Vista.  USB ports and ports that accept cards camera no longer recognize them.  Scanner can be moved from USB port to the USB port and works but "Explorer" does not show that they exist.  How to recognize camera cards (mainly) as they did before?  Windows offers device (camera card) has a problem, but this isn't the case.  Card works so executed through camera (USB cable to the USB port) in two different cases with two different cameras.  Also plugged on the USP port scanner is not recognized by the function 'Explorer' but actually works very well.

  Hello ghpots,

  ·         What happens when connect cards camera on USB ports, it installs the device drivers?

  ·         What are the changes that you made to your computer, since it has stopped working.

  When you connect your devices to the USB ports, check the status of the device in the Device Manager. Check if you see a yellow fringe or exclamations in the Device Manager.

  I suggest that you remove and then reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. click on start, type Device Manager and open the Device Manager.

  2 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  3. restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and test to make sure that the problem is solved.

  Check the Device Manager to see if the unit under section USB or other devices. To do this, follow the procedures below:

  Method 1:

  1. click on Start, right click computerand select Properties .

  2. click on Device Manager.

  3. click on the (+) sign next to Universal Serial Bus controllers and next to the peripheral plus other section.

  Look for the USB device under the Universal Serial Bus controllers, or under the other devices section.

  4. If the unit is under Bus USB controllers or other devices, click on the reference to the 'unknown' device name, and then click Uninstall to remove the device.

  5. close Device Manager, and then restart the computer.

  6. If the USB device that has problems with software and it has not already been installed, install the software, now follow the planned manufacturer of the directives.

  7 reconnect the USB device that had issues and test to see if it works.

  The unit should now work correctly. Continue if the device name is not found in the Device Manager.

  Method 2: There may be a problem with the USB port. Try connecting to a different USB port. If the USB device is displayed in Device Manager after plugging the cable in a different port, then uninstall and reinstall the software of USB device driver.

  Method 3: Check the manufacturer of the device for support if the device is still unable to display.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• IPod touch 4g not recognized by the computer.

  I have an ipod 4g and it is not recognized by my computer or itunes.  I called apple and used their forums and discovered that when I download itunes apple mobile driver usb is not installed.  Apple told me that it was a windows problem.  so I went to my brothers pc which has windows 7 like mine, downloaded itunes and my ipod could not always be recognized.  the mobile USB driver apple has not been installed on his computer no more.  I went to a friends house and he hooked up to his laptop which has windows 7 and it DOES not recognize my ipod.  After that, I knew for sure it was a windows problem.  can someone help me please?

  PS: when I download itunes, quicktime is not installed for some reason any.  Also my anti-virus could be a problem when I download itunes?

  Hi Karim,

  -Were there any changes made to the computer before the show?

  I suggest you go to the following Help article and check if it helps.

  
  

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  You can also go through the following link and check if it helps.

  
  

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  It will be useful.

• Deletion of old user not recognized by the computer accounts

  The computer crashed, new hard drive, then restore the user accounts have been created with a different name.  The backup has brought in the old accounts with the files.  Copied the contents for new accounts.

  However, the user accounts appear in the C: drive but are not operational, as the computer did not recognize them.  Can I just delete the records and which will work?  What I have to clean anything regarding accounts?

  I want to just make sure I don't do something that is incorrect. There is no need to keep
  Thank you

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.
   
  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.

  If this does not work, try to delete the files or folders by using one of the following free programs: killer file http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/) or Unlocker: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml.  Sometimes, these programs work when other methods (especially standard methods of Vista) only.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.