USB ports not working do not correctly after upgrading Windows

Similar Questions

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• HP 8 5901 flow not 4g after upgrade Windows 10

  OK, so after upgrade my Tablet (5901) flow 8 to 10 windows it does not read my t-mobile sim card and I can only connect to wifi. is there a solution so that I can get 4g I use this tablet for work and theres no wifi to my work... Thank you

  from today I received jusr of updates of windows about 10 minutes ago and I now have a 4 g yet! Thanks for your help

  Anyone who has this problem just keep checkimg for the critical windows updates!

• Battery not detected after upgrading Windows 10

  Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

  I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

  Thank you!

  Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• Onboard LAN doesn't work does not correctly after installing Windows 8.1

  So for my h9 - 1120t Phoenix office I decided to replace Windows 7 with Windows 8.1.

  The transition went very well, but I'm having a problem with the onboard LAN. I'm going to stay connected to the internet for about 10 minutes, then the computer disconnects and will not detect at all connections.

  I also used a USB LAN adapter and a job without problem so I think that there is a conflict of driver with Windows 8. Is there a way to fix this?

  Go to the Device Manager
  Click right Wi - Fi adapter
  Click Properties - to open the Properties window
  Click the power management tab
  Remove checkbox allow the computer...
  
  You may also need to change the access point/router settings
  
  Checkurtech

• Apps will not open after upgrade windows 8.1

  Microsoft sent me a pop up invitation to upgrade my computer window 8 for windows 8.1 that I accepted and downloaded today. Unfortunately the requests that I had on my windows 8 screen will not open except for requests relating to office 365 and google. Can someone help me?

  I don't have phone customer support Microsoft, who said that they would not help me unless I paid. I bought my computer about a month ago, but they said the warranty was expired for windows 8. I'll take that up with the company that sold it for me. However the fact that Microsoft asked me to upgrade today, that I accepted in good faith, and subsequently my worst computer than before and offering no help leaving me repair free of charge is outrageous.

  The pop up came when I was working on my emails with no other applications open.

  Good news. After turning my computer off at night and restarting this morning all the apps work correctly. Somehow the problem fixed itself.

• HP Pavilion does not start after upgrading Windows 10

  (Sorry for my bad English)
  Last night I started to update my HP Pavilion Windows 8.1 to 10, but I have a problem, because today, in the morning, the update was 99%, and it ended, just after I have shut down the computer and is going to school and when I got home, I turned on my HP and the problem was that the HP logo appeared and he began to load , but he didn't only show anything else than that, so I thought I'd let load after 3 hours, it was still loading and it was reseting every 5 minutes and now I just can't not try windows 10. Help?

  Hi there @lmao1,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that once you tried to upgrade to Windows 10, now stuck on the HP Logo at startup.

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue "option ' screen at all? '"

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• Virtual Keyboard Pro Dell place 8 does not appear after upgrading Windows 8.1 for Windows 10

  About my Dell coming 8 Pro, after having recently upgraded from Windows to Windows 10 8.1, now when I go to Firefox or other applications and click on in a region where the virtual keyboard automatically appears on the screen, it is no longer made. Y at - it a setting I'm not turn on or off in order to correct this problem? Thank you.

  Excellent. Thank you so much MNP3.

• Satellite Pro P300 - PSPCDA-01L00D - DVD not found after upgrade Windows 7

  After a new installation of Windows 7 Home Premium, and then download the required drivers from the Toshiba support site there are problems with the DVD drive in my laptop.

  I downloaded the app Toshiba DVD Player, which auto detects what version you need. After the application is running, I get the message "no installation Toshiba DVD could be found! You can only update a version already installed. »

  How can I get the DVD player to be recognized, if the application will be installed. Currently the DVD player will not play DVD - that will be a problem for my daughter who use the laptop.

  The driver Windows 7 page mentions too, updates will be available via Toshiba Service Station, but does provide no link. A search in the Web from Toshiba site fails to locate, where can I get this utility of?

  What you have found on the Toshiba download page, it's just the update and not full version.

  If you want to have really good player install VLC player. It's free and you can find Googling autour. This reader reads all video formats and I use it for a long time.

  It reads the DVD without any problem.

  Test it. If you n t it you can delete any it system.

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• Pavilion 15ab020ca: keypad touch definition has not registered after upgrade Windows 10

  Same problem here. I need to change the setting so that 1 finger scrolling works every time after a reboot.

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.