USB ports not working not not Pavilion DV6-6165tx

Hi all

I bought pavilion dv6-6165tx 2 years back and ibought a new hdd internal as man became corrupt, I installed os win 7 pro (licensed) and drivers of HP online.

now the problem is that my left usb ports do not work, and also my finger print reader

When I checked in the Device Manager I have 2 errors

Universal serial (USB) 1 Bus controller).

Unknown device 2).

and the hardware id is the following

PCI\VEN_1033 & DEV_0194 & SUBSYS_3388103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_3388103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C03

USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018

I don't know what to do, please someone guide me how to get rid of these problems and also some of the updated drivers.

help, much appreciated

Thank you

Hello:

You need these drivers...

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en&OS=4063&product=5173797&sw_lang=

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102489-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

Tags: Notebooks

Similar Questions

  • HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

    Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

    Thank you in advance for your help and sorry for my bad English, I'm Italian.

    Hello

    AMD AHCI, USB 3.0 chipset and RAID drivers

  • USB ports not working do not. Pavilion dm4-3090se

    USB ports not working do not.

    Thanks for your reply.

    no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

    they were back!

    Thank you again for your answer...

    Louise

  • Pavilion p7 - 1380t: USB ports not working not

    The two front USB ports do work not today. Worked fine yesterday. Everything I plug is not coming. Using ports in the back, they work very well.

    Someone at - it ideas about the problem and a fix?

    Thank you

    Hello @xploded16,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how the front USB ports on your desktop computer do not work, and I'd be happy to help you in this case!

    To enable your system to recognize the USB ports before once again, I recommend that you follow the steps described in this document on Troubleshooting connections USB (Windows 7).

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • Equium A60 - 692 USB Ports not working not

    Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

    A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
    If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

    Richard S.

  • 8.1 Windows 64 - bit 3 USB ports not working not

    I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

    In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

    Please try this:

    http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

    Thank you!

    Houman

  • HP a6554f: Front USB Ports not working for a6554f

    Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

    Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

    What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

    I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

    Also, is there a diagram to show where each cable goes to the a6554f model?

    As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.

  • USB ports not working not online when using wireless

    Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

    Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

    As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

    I would be eternally grateful if you could help with this frustrating situation

    Kind regards

    Graham

    Hi CindyThrelkel,

    Try the following steps to resolve the problem:

    Method 1: Run the troubleshooter of material and check what is happening.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

    a. Click Start and then click Control Panel.

    b. click System and Maintenance, click System and then click on Device Manager.

    Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

    Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

    d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

    If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

    You can also check:

    In Windows network connection issues

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

    Hope this information helps.

  • All usb ports not working do not all of a sudden on windows xp

    I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?

    Hi Backgammon167,

    The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General&lang=en&CR=us

    I hope this information is useful.

    Concerning
    Rehman - support Micrsosoft

  • Satellite P10-304: USB Ports not recognize anything

    I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

    Hello

    One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

    By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

    Good bye

  • USB port not to pick up when it is connected

    USB PORT NOT TO PICK UP WHEN IT IS CONNECTED

    Himanshu salvation,

    ·         How long have you been faced with this problem?

    ·         Did you make any changes before the show?

    Refer to the following Microsoft Fix It solution and click run now , and follow the steps to solve the problem:

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems/

    Hope this information helps.

  • USB ports not recognized anymore

    I have Vista.  USB ports and ports that accept cards camera no longer recognize them.  Scanner can be moved from USB port to the USB port and works but "Explorer" does not show that they exist.  How to recognize camera cards (mainly) as they did before?  Windows offers device (camera card) has a problem, but this isn't the case.  Card works so executed through camera (USB cable to the USB port) in two different cases with two different cameras.  Also plugged on the USP port scanner is not recognized by the function 'Explorer' but actually works very well.

    Hello ghpots,

    ·         What happens when connect cards camera on USB ports, it installs the device drivers?

    ·         What are the changes that you made to your computer, since it has stopped working.

    When you connect your devices to the USB ports, check the status of the device in the Device Manager. Check if you see a yellow fringe or exclamations in the Device Manager.

    I suggest that you remove and then reinstall all USB controllers.

    To remove and reinstall all USB controllers, follow these steps:

    1. click on start, type Device Manager and open the Device Manager.

    2 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    3. restart the computer and reinstall the USB controllers.

    Plug in the removable USB storage device and test to make sure that the problem is solved.

    Check the Device Manager to see if the unit under section USB or other devices. To do this, follow the procedures below:

    Method 1:

    1. click on Start, right click computerand select Properties .

    2. click on Device Manager.

    3. click on the (+) sign next to Universal Serial Bus controllers and next to the peripheral plus other section.

    Look for the USB device under the Universal Serial Bus controllers, or under the other devices section.

    4. If the unit is under Bus USB controllers or other devices, click on the reference to the 'unknown' device name, and then click Uninstall to remove the device.

    5. close Device Manager, and then restart the computer.

    6. If the USB device that has problems with software and it has not already been installed, install the software, now follow the planned manufacturer of the directives.

    7 reconnect the USB device that had issues and test to see if it works.

    The unit should now work correctly. Continue if the device name is not found in the Device Manager.

    Method 2: There may be a problem with the USB port. Try connecting to a different USB port. If the USB device is displayed in Device Manager after plugging the cable in a different port, then uninstall and reinstall the software of USB device driver.

    Method 3: Check the manufacturer of the device for support if the device is still unable to display.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • USB ports not responding do not after windows update

    After a windows update in March/April 2012 all my usb ports stop working. The single port works now is the SATA USB combo.

    all I have this problem and know how to fix?
    Even a general difficulty just to get ports working again would be greatly appreciated.
    I've exhausted all other patches and now know that it is the windows update that caused the problem, so I'm forced to ask for help here.
    Thanks in advance for your time.

    Which has been updated by windows update is specific to your individual system, and if the USB failed in April you seem to have left ror a long enough period.

    Windows Update > history will show what has been installed.

    In a first time visit your manufacturers of PC and update or reinstall your chipset drivers.

    PS Theres no point mentioning patches unless you specify that you tried

  • Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

    I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

    Please tell which side are these ports and how to get the maximum speed out of them?

    Hi Hanazir,

    You'll love this.

    Get a bright light and shine on the left side of the laptop.

    Now, get a magnifying glass and look carefully next to the USB ports.

    3.0 ports are marked with the logo 'SuperSpeed '. "SS".

    Similar to this, but very, very small!

    To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

    There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

    Dragon tips

    USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

    Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

    It's my pleasure to help.

    Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

    When the answer is a good fix or workaround, click accept as Solution !

    Although I strive to reflect best practices of HP, I do not work for HP.

  • USB PORTS STOPPED WORKING

    My USB ports for Entertainment of HP Pavilion laptop dv7-2277 cl stopped working.  I tried to update to Windows, since before system restore and still no luck.  the port on the left side of the laptop shown peripheral unknown whenever I plug anything in there and nothing does.  the two ports on the side right are nothing at all.  The indicated device MGR I use the current drivers, but he doesn't know what I use in the car.  I tried 3 different mouse and ACC Player.  This seemed to happed after that March 11, 2014 Windows update or after plugging in headphones NXG technology to charge the battery.  NXG assures me that they are not the problem and their agenda only charges the battery of the power from the USB port.  Ports due light ACC Player or headphones indicating the power is in them.  I'm stuck and have no idea what else to do.  Please help if possible.  Thank you for reading and taking the time to listen.

    My computer is now fixed and I'm superised that nobody else on this forum had the same problem.

    Microsoft just send a new update for USB mouse and if ports pointers fixed my question on all my USB.

    HAPPY CAMPER!

    See you soon!

Maybe you are looking for